LXXX 15.00/01/90FL 4.5SN GY BX
LXXX 15.00/01/90FL 4.5SN GY BX
Product image
LXXX 15.00/01/90FL 4.5SN GY BX
Product image
LXXX 15.00/01/90FL 4.5SN GY BX
Dimensional drawing
LXXX 15.00/01/90FL 4.5SN GY BX
Graph
LXXX 15.00/01/90FL 4.5SN GY BX
Graph
LXXX 15.00/01/90FL 4.5SN GY BX
Graph
Increased power reserves
Optimised application safety
LXXX 15.00/01/90FL 4.5SN GY BX
Product benefits
Increased power reserves
Optimised application safety
LXXX 15.00/01/90FL 4.5SN GY BX

LXXX 15.00/01/90FL 4.5SN GY BX

Dit product is niet meer beschikbaar.

Printed circuit board terminals, 15.00 mm, Number of poles: 1, 90°, Solder pin length (l): 4.5 mm, tinned, Pebble grey, Clamping yoke connection, Clamping range, max. : 50 mm², Box

ID výrobku 1047520000
Stáhnout datový list Engineeringondersteuning Productdownloads
Verwante producten 4
Approvals General ordering data Dimensions and weights Miljööverenstämmelse för produkt System parameters Material data Conductors suitable for connection Номинальные характеристики по IEC Märkdata enligt CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

인증
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/70d4994d-1e1f-4a62-8b8a-96bcbd57aca3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
인증 번호(UR)
E60693 

General ordering data

버전
Printed circuit board terminals, 15.00 mm, Number of poles: 1, 90°, Solder pin length (l): 4.5 mm, tinned, Pebble grey, Clamping yoke connection, Clamping range, max. : 50 mm², Box 
주문 번호
1047520000 
유형
LXXX 15.00/01/90FL 4.5SN GY BX 
GTIN(EAN)
4032248783632 
수량
20 items
Product data
IEC: 1000 V / 150 A / 0.5 - 50 mm²
UL: 600 V / 126 A / AWG 20 - AWG 1 
Packaging
Box 
배송 상태
This article will no longer be available in the future. 
마지막 주문 날짜
/Date(1773356400000)/ 

Dimensions and weights

깊이
31 mm
깊이 (인치)
1,22 inch
높이
56 mm
Height (inches)
2,205 inch
Height of lowest version
51,5 mm
너비
30,5 mm
Width (inches)
1,201 inch
순중량
34,05 g

Miljööverenstämmelse för produkt

RoHS 준수 상태
Kompatibel utan undantag 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

제품군
OMNIMATE Power - series LXXX 
와이어 결선 방식
Clamping yoke connection 
PCB에 장착
THT solder connection 
도체 아웃렛 방향
90° 
피치(mm)(P)
15 mm
피치(인치)(P)
0,591 "
극 수
1 
핀 시리즈 수량
1 
고객 맞춤
No 
Number of rows
1 
솔더 핀 길이(l)
4,5 mm
솔더핀 크기
1.2 x 1.2 mm 
솔더 구멍 직경(D)
1,6 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
폴당 용접 핀 수
4 
스크류드라이버 블레이드
1.2 x 6.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
2,5 Nm
Tightening torque, max.
4 Nm
Clamping screw
M 6 
Stripping length
18 mm
L1 in mm
0 mm
L1 in inches
0 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Protection degree
IP20 

Material data

절연재
Wemid (PA) 
컬러 코드
Pebble grey 
컬러 차트(유사)
RAL 7032 
절연재 그룹
I 
CTI(Comparative Tracking Index, 비교 추적 지수)
≥ 600 
UL 94 가연성 등급
V-0 
접점 재질
Cu-alloy 
접점 표면
tinned 
코팅
4-6 μm SN 
용접 결선의 레이어 구조
1.5...3 µm Ni / 4...6 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

클램프 범위, 최소
0,5 mm²
클램프 범위, 최대
50 mm²
결선 단면규격 AWG, 최소
AWG 20 
결선 단면규격 AWG, 최대
AWG 1 
단선, 최소 H05(07) V-U
0,5 mm²
단선, 최대 H05(07) V-U
16 mm²
꼬임, 최소 H07V-R
6 mm²
stranded, 최대 H07V-R
50 mm²
연선, 최소 H05(07) V-K
0,5 mm²
연선, 최대 H05(07) V-K
35 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최소
0,5 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최대
35 mm²
와이어 엔드 페룰 포함, DIN 46228 pt 1, 최소
0,5 mm²
페럴 포함, DIN 46228 pt 1, 최대
35 mm²
클램프형 도체
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      9019180000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004090000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      9019210000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004110000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      0565700000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004130000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      10 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        21 mm
    • Recommended wire-end ferrule:
      0565800000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0379300000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      16 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        21 mm
    • Recommended wire-end ferrule:
      0566000000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0375200000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      0565600000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004070000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      35 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        19 mm
    • Recommended wire-end ferrule:
      9019320000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0368900000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      50 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004210000
참조 텍스트
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Номинальные характеристики по IEC

пройдены испытания по стандарту
IEC 60664-1 
IEC 61984 
정격 전류, 극 수(Tu=20°C)
150 A
정격 전류, 극 수(Tu=40°C)
150 A
서지 전압 클래스 정격 전압 / 오염 등급 II/2
1.000 V
서지 전압 클래스 정격 전압 / 오염 등급 III/2
1.000 V
서지 전압 클래스 정격 전압 / 오염 등급 III/3
1.000 V
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 II/2
8 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/2
8 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/3
8 kV

Märkdata enligt CSA

試験制度（CSA）
CSA 
証明書番号（CSA）
200039-1198743 
Tensione nominale (Gruppo B / CSA)
600 V
Tensione nominale (Gruppo C / CSA)
600 V
정격 전압(사용 그룹 D / CSA)
600 V
정격 전류(사용 그룹 B / CSA)
127 A
정격 전류(사용 그룹 C / CSA)
127 A
정격 전류(사용 그룹 D / CSA)
5 A
와이어 단면적, AWG, 최소
AWG 20 
와이어 단면적, AWG, 최대
AWG 1 
승인값 참조
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Istituto (UR)
UR 
N° certificato (UR)
E60693 
정격 전압(사용 그룹 B / UL 1059)
600 V
정격 전압(사용 그룹 C / UL 1059)
600 V
정격 전류(사용 그룹 B / UL 1059)
126 A
정격 전류(사용 그룹 C / UL 1059)
126 A
와이어 단면적, AWG, 최소
AWG 20 
와이어 단면적, AWG, 최대
AWG 1 
승인값 참조
Specifications are maximum values, details - see approval certificate. 

Packing

패키징
Box 
VPE 길이
65 mm
VPE 폭
86 mm
VPE 높이
190 mm

Type tests

테스트: 표시 내구성
  • Standard:
    DIN EN 60512-1-1 / 01.03
  • Test:
    mark of origin, type identification, type of material, pitch, date clock, approval marking CSA, approval marking UL, durability
  • Evaluation:
    available
테스트: 클램프 사용 가능한 단면
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      solid 16 mm²
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
    • Type of conductor and conductor cross-section:
      AWG 10/1
    • Type of conductor and conductor cross-section:
      AWG 1/19
    • Type of conductor and conductor cross-section:
      H07V-R50
    • Type of conductor and conductor cross-section:
      H07V-K35
  • Evaluation:
    passed
컨덕터의 손상 및 의도치 않은 느슨해짐 테스트
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
  • Evaluation:
    passed
  • Requirement:
    1.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 10/1
  • Evaluation:
    passed
  • Requirement:
    2.0 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 10 mm²
  • Evaluation:
    passed
  • Requirement:
    8,6 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 1/19
  • Evaluation:
    not checked
  • Requirement:
    8,6 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
  • Evaluation:
    passed
풀아웃 테스트
  • Standard:
    DIN EN 60999 section 8.5 / 04.94
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
  • Evaluation:
    passed
  • Requirement:
    ≥80 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 10/1
  • Evaluation:
    passed
  • Requirement:
    ≥ 90N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 10 mm²
  • Evaluation:
    passed
  • Requirement:
    > 236 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 1/19
  • Evaluation:
    not checked
  • Requirement:
    > 190 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
  • Evaluation:
    passed

Important note

IPC 준수
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
참고 사항
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • IP 20 from 16 mm² to 50 mm²
  • The test point can only be used as potential-pickup point.
  • Wire-end ferrules are mandatory for stranded wires with more than 19 strands.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01