PVN DC 2I 1O 1MPP SPD2R EVO 11
PVN DC 2I 1O 1MPP SPD2R EVO 11
PCB design
PVN DC 2I 1O 1MPP SPD2R EVO 11
PVN DC 2I 1O 1MPP SPD2R EVO 11
PVN DC 2I 1O 1MPP SPD2R EVO 11
PVN DC 2I 1O 1MPP SPD2R EVO 11

PVN DC 2I 1O 1MPP SPD2R EVO 11

Photovoltaics, Combiner Box, PV Next, 1100 V, 1 MPP, 2 Inputs / 1 Output per MPP, Surge protection II, MC4-Evo 2

Produkt ID 2866310000
Download datablad Produktdownloads Engineering-support
Tilbehør 13 Er tilbehør til 4 Reservedele 1 Anvendte produkter 63
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Included in delivery Guarantee elektriska egenskaper Enclosure General data Ingressi Outputs Protección contra sobretensiones, lado de CC DC load break switch Important note Classifications Tender specification sheets

Approvals

Schválení
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Verze
Photovoltaics, Combiner Box, PV Next, 1100 V, 1 MPP, 2 Inputs / 1 Output per MPP, Surge protection II, MC4-Evo 2 
Číslo objednávky
2866310000 
Typ
PVN DC 2I 1O 1MPP SPD2R EVO 11 
GTIN (EAN)
4064675603993 
Qty.
1 Styk

Dimensions and weights

Hloubka
132 mm
Profundidad (pulgadas)
5,197 inch
Výška
236 mm
Height (inches)
9,291 inch
Šířka
200 mm
Width (inches)
7,874 inch
Net weight
1.620 g

Temperatures

Okolní teplota
-40 °C…50 °C 
Humidity
5...95 %, no condensation 

Environmental Product Compliance

Stav souladu se směrnicí RoHS
Compliant with exemption 
Výjimka ze směrnice RoHS (je-li použitelné/známo)
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
bdab5698-6a20-4370-8e28-8810d882d01a 

Included in delivery

Zahrnutá příslušenství
  • Article:
    Mounting foot
  • Quantity:
    4
  • Article:
    Sealing plug
  • Quantity:
    8

Guarantee

Časový interval
5 years 

elektriska egenskaper

Bemessungskurzzeitstromfestigkeit
  • Rated current:
    37,5 A
Bemessungsspannung DC
1.100 V
DC-Nennstrom pro Anschluss
  • Current per string, max.:
    30 A
Strom pro Maximum Power Point, max.
30 A

Enclosure

Izolační materiál
Polyester glass-fibre reinforced, Polycarbonate 
Odolnost proti nárazu
IK08 in accordance with IEC 62208 
IK10 in accordance with IEC 62262 
Připojení krytu
Via mounting foots 
Stupeň krytí
II 
Typ montáže
Wall mounting 
Řetězec typu připojení
Plug MC4-Evo 2 

General data

Einbauort
Protected outdoor area (Land and Sea) 
Normen
EN 61643-31 
Schutzart
IP65 

Ingressi

Amount of maximum power points (MPP)
1 
DC Input + & -
  • Wire connection:
    • Type of connection:
      Stäubli MC4-Evo 2 connector
    • Compatible cable crossection:
      EN 50618:2015
    • Wire cross-section, min.:
      2,5 mm²
    • Wire cross-section, max.:
      16 mm²
Functional earth connector
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      Tension clamp connection with actuator
    • Flexible, max. H05(07) V-K:
      25 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      16 mm²
Fuse type
Neither fuse cartridge nor holder 
Fuses
No 
Max. number of DC inputs
per Maximum Power Point 2 inputs connected in parallel 
Number of conduit inlets
2 
Number of string inputs per MPP
≤ 2 
Surge protection auxiliary contact
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      Tension clamp connection with actuator
    • Flexible, max. H05(07) V-K:
      1,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      1,5 mm²
Number of inputs
2 

Outputs

DC Output + & -
  • Wire connection:
    • Type of connection:
      Stäubli MC4-Evo 2 connector
    • Compatible cable crossection:
      TÜV 2 Pfg1169/08.07
    • Wire cross-section, min.:
      2,5 mm²
    • Wire cross-section, max.:
      16 mm²
Max. number of DC outputs
per Maximum Power Point 1 output 

Protección contra sobretensiones, lado de CC

Ableitstrom In (8/20 µs)
20 kA 
Ableitstrom, max. (8/20 µs)
40 kA
Anforderungsklasse
Тип II 
Gesamtableitstrom Itotal (8/20µs)
50 kA
Kurzschlussfestigkeit ISCPV
11.000 A
Normen
EN 61643-31 
Schutzpegel Up (+/-)
≤ 3.8 kV 
Schutzpegel Up (+/PE)
≤ 3.8 kV 
Schutzpegel Up (-/PE)
≤ 3.8 kV 
Spannung der PV Anlage, max. UCPV
1.100 V

DC load break switch

Switch disconnector execution
no switch 
Voltage type
DC 

Important note

Informace o produktu
The SCIP number was assigned due to a lead content of more than 0.1 % of the net weight.

Safe use instruction according to ECHA:
The identification of the hazardous substance is sufficient to allow safe use of the article throughout its life cycle, including the service life, disassembly and waste/recycling phase 

Classifications

ETIM 8.0
EC003857 
ETIM 9.0
EC003857 
ETIM 10.0
EC003857 
ECLASS 14.0
22-57-02-92 
ECLASS 15.0
22-57-02-92 

Tender specification sheets

Long specification

Combiner box for inverters with 1 MPP tracker, suitable for protecting the DC side of a photovoltaic system according to EN 51543-32.

MPP1:
2 inputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
1 output, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

Max. string voltage Uoc: 1100V
1 class/type II arrester with signal contact
Connection of the signal contact via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm²
Connection of the functional earth via cable glands (8-12mmØ) Conductor cross-section: 16-25mm²
Protection class: IP65
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 236x200x132 mm

Approval according to low voltage switchgear and controlgear IEC 61439-1:2011 and EN 61439-2:2011