US67-VIB24C-IOL-0UNI0A02A00000

Product ID 3094650000

RoHS Compliance Status	Compliant
REACH SVHC	No SVHC above 0.1 wt%

Applications	for indoor and outdoor use
For Ex zone dust	None
For Ex zone gas	None
Machine vibration assessment included	Yes
Operating life	10 years
Protection class (UL)	Type 4X
Safety category	No
Protection degree	IP67 (in plugged condition) IP66 (in plugged condition)

Accuracy of temperature measurement	1 %
Accuracy of vibration measurement	10 %
Calibration point	1g (rms) @ 159,2 Hz
Cross sensitivity	<5 %
Device is calibrated	Yes
Effective vibration velocity, max.	64 mm/s
Frequency range configurable	Yes
Measurement range	Configurable via IO-Link
Measuring unit vibration velocity (RMS)	mm/s
Number of measuring axes	1
Physical measurement principle of the sensor	Vibration acceleration
Sensor measuring method acc. to ISO10816-3	1-axis broadband analysis 10 Hz...1 kHz, VRMS
Sensor temperature	Monitored value: Temperature Type of sensor: Temperature MEMS Measurement accuracy: +/-1°C
Spectral analysis method (FFT)	No FFT calculation
Temperature measurement available	Yes
Temperature range measuring head	Temperature, min.: -40 °C Temperature, max.: 85 °C
Transmission intervall of signals	Continuous measurement
Vibration acceleration, max. (gravity g)	48
Vibration acceleration, min. (gravity g)	-48
Frequency range, min.	1 Hz
Frequency range, max.	12.000 Hz
Sensor vibration	Monitored value: Acceleration Type of sensor: single-axis MEMS
Monitoring	Vibration monitoring acc. to DIN ISO 10816-3
Accuracy	±0,5 % at the calibration point ±10 % (acc. DIN ISO 2954)

Connection type of IO-Link interface	IO-Link V1.1.3
Input current, max.	320 mA
IO-Link available	Yes
Measuring and process variables	RMS vibration acceleration RMS vibration velocity Peak value vibration acceleration Temperature Status of the internal self-test Error status States of all switching signals Crest value Bearing condition parameter according to 13337-3
No-load input current	120 mA
Output level	N/O contact / N/C contact (low-active / high-active)
Output signal	4...20 mA (proportional to measuring range)

Material

Stainless steel 1.4404 (V4A), AISI 316L

Connection thread	M8 thread
Installation location	Indoor and outdoor use
Mounting thread	M8
Sealing with tie possible	No
Tightening torque	8 Nm
Torque for cap nut, max.	0,4 Nm
Type of mounting	Screw mounting Direct mounting Adhesive fastening Mounting plate Magnet Miscellaneous
Type of mounting sensor	Many possibilities using adapters Direct mounting: screw connection
Type of thread	External thread
Wrench size	24 mm

Type of power supply	DC External
Wireless	No

Frequency range, max.	12.000 Hz
Frequency range, min.	1 Hz

Approval/Certificate/Document of Conformity	[Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_321075)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_322813)
Software	[IODD Files for VIB2x sensors](https://mdcop.weidmueller.com/mediadelivery/asset/900_324916)
Catalogues	[Catalogues in PDF-format](https://www.weidmueller.com/int/service/technical_product_catalogues.jsp)

Approvals	![CULUS](/picture/CULUS.gif)
ROHS	Conform
UL File Number Search	[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)
Certificate no. (cULus)	E337701