ACT20P-AI-AO-AC-S
Product image
ACT20P-AI-AO-AC-S
Connection diagram
ACT20P-AI-AO-AC-S
Type codes
ACT20P-AI-AO-AC-S
Dimensioned drawing
ACT20P-AI-AO-AC-S
ACT20P-AI-AO-AC-S

ACT20P-AI-AO-AC-S

Analogue isolating amplifier, Input : I/U universal, Output : I/U universal, Signal converter/isolator, 90…264 V AC power supply

Tuotteen tunnus 1545720000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 2 Yksittäiset osat 1 Samankaltaiset tuotteet 9
General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output General data Insulation coordination Connection data Important note Classifications Approvals

General ordering data

Version
Analogue isolating amplifier, Input : I/U universal, Output : I/U universal, Signal converter/isolator, 90…264 V AC power supply  
Order No.
1545720000  
Type
ACT20P-AI-AO-AC-S  
GTIN (EAN)
4050118350791  
Qty.
1  items

Dimensions and weights

Depth
113,7  mm
Depth (inches)
4,476  inch
Height
119,2  mm
Height (inches)
4,693  inch
Width
12,5  mm
Width (inches)
0,492  inch
Net weight
178  g

Temperatures

Storage temperature
-25 °C...70 °C  
Operating temperature
-20 °C...60 °C  
Humidity at operating temperature
0...95 % (no condensation)  
Humidity
10…90 %, no condensation  

Probability of failure

SIL in compliance with IEC 61508
None  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924  

Input

Input current
configurable  
0-22 mA (min. measurement range 4 mA)  
Input resistance, current
100 Ω  
Input resistance, voltage
≥ 1 MΩ  
Input voltage
configurable  
0-11 V (min. measurement range 2 V)  
Number of inputs
1  
Resolution
3.5 µA / 1.76 mV per bit  
Sensor supply
24 V DC  

Output

Load impedance current
1 kΩ @ 20 mA  
load impedance voltage
> 600 Ω @ 10 V  
Number of outputs
1  
Offset voltage
≤ 20 mV  
Output current
Adjustable  
0...22 mA  
Output range, min, 4 mA  
Output voltage, note
Adjustable  
0...11 V  
Output range, min, 2 V  
Type
active  
connected control must be passive  

General data

Configuration
DIP switch  
Front push-button  
with reference voltage/current sources  
Linearity
<± 0.1 % of signal range  
Typ. ± 0.05 % of signal range  
Nominal power consumption
2  VA
Operating altitude
≤ 2000 m  
Power consumption, typ.
3  W
Protection degree
IP20  
Rail
TS 35  
Step response time
350 ms  
Temperature coefficient
<0.05 % / °C  
Voltage supply
90…264 V AC  
47 to 63 Hz  

Insulation coordination

EMC standards
EN 61326-1  
Galvanic isolation
3-way isolator  
between input ⁄ output ⁄ supply  
Impulse withstand voltage
4 kV (1.2/50 µs)  
Insulation voltage
2 kV inputs / outputs  
Pollution severity
2  
Surge voltage category
III  

Connection data

Type of connection
Screw connection  
Tightening torque, min.
0,4  Nm
Tightening torque, max.
0,6  Nm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,5  mm²
Clamping range, max.
2,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 12  

Important note

Product information
The universally configurable DC isolating amplifier ACT20P-AI-AO-DC/AC-x isolates and converts analogue signals.
An analogue input signal (current or voltage) is linearly converted into an analogue output signal (current or voltage) and galvanically isolated.
The power supply is galvanically isolated from input and output (3-way isolation).

Features
  • Universally configurable via DIP switches and operating buttons
  • Active or passive signal input
  • Front LED indicates operation status
  • 3-way galvanic isolation between input, output and power supply
 

Classifications

ETIM 6.0
EC002653  
ETIM 7.0
EC002653  
ETIM 8.0
EC002653  
ETIM 9.0
EC002653  
ETIM 10.0
EC002653  
ECLASS 9.0
27-21-01-20  
ECLASS 9.1
27-21-01-20  
ECLASS 10.0
27-21-01-20  
ECLASS 11.0
27-21-01-20  
ECLASS 12.0
27-21-01-20  
ECLASS 13.0
27-21-01-20  
ECLASS 14.0
27-21-01-20  
ECLASS 15.0
27-21-01-20  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_322323/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate no. (cULusEX)
E338066