CP M SNT 250W 24V 10AUW
CP M SNT 250W 24V 10AUW
Electric symbol

CP M SNT 250W 24V 10AUW

Power supply, switch-mode power supply unit, 24 V

Product ID 1165480010
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 2 Verwante producten 1
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input Output General data EMC / shock / vibration Insulation coordination Electrical safety (applied standards) Connection data (input) Connection data (output) Signalling Classifications Approvals

General ordering data

Version
Power supply, switch-mode power supply unit, 24 V  
Order No.
1165480010  
Type
CP M SNT 250W 24V 10AUW  
GTIN (EAN)
4050118117318  
Qty.
1  items
Delivery status
Discontinued  
Available until
19.05.2022  
Alternative product
[2467250000](~/p/2467250000)  

Dimensions and weights

Depth
155  mm
Depth (inches)
6,102  inch
Height
130  mm
Height (inches)
5,118  inch
Width
60  mm
Width (inches)
2,362  inch
Net weight
1.300  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-25 °C...70 °C  

Environmental Product Compliance

RoHS Compliance Status
Compliant  
REACH SVHC
Lead 7439-92-1  

Input

AC current consumption
1.2 A @ 230 V AC / 2.4 A @ 115 V AC  
AC input voltage range
85...264 V AC (derating at 100 V AC)  
Connection system
Screw connection  
DC current consumption
0.8 A @ 370 V DC / 2.3 A @ 120 V DC  
DC input voltage range
80…430 V DC  
Frequency range AC
47...63 Hz  
Input fuse (internal)
Yes  
Inrush current
max. 12 A  
Rated input voltage
100...240 V AC (wide-range input)  
Recommended back-up fuse
4 A / DI, safety fuse
10 A, Char. B, circuit breaker
3...4 A, Char. C, circuit breaker  
Wire connection method
Screw connection  

Output

Continuous output current @ UNominal
12 A @ 45 °C, 10,7 A @ 55 °C, 7,5 A @ 70 °C  
Nominal output current for Unom
10 A @ 60 °C  
Output current
10A  
Output voltage type
DC  
Output voltage, max.
29,5  V
Output voltage, min.
22,5  V
Output voltage, note
(adjustable via potentiometer on front)  
Overload protection
Yes  
Parallel connection option
yes, max. 5 (without diode module)  
Rated output voltage
24 V DC ± 1 %  
Residual ripple, breaking spikes
< 50 mVPP @ 24 V DC, IN  
< 2,4 VSS @ 24 V DC, IN @ -40°C  
Wire connection method
Screw connection  

General data

AC failure bridging time @ Inom
> 20 ms @ 230 V AC / > 20 ms @ 115 V AC  
Ambient temperature
-25 °C...+70 °C (derating from 60 °C)  
Clip-in foot
metal  
Current limiting
> 120% IN  
Degree of efficiency
90 % @ 230 V AC / 87 % @ 115 V AC  
Housing version
Metal, corrosion resistant  
Indication
Dual LED Operational: green LED, Error: red LED  
Max. perm. air humidity (operational)
5 %…95 % RH  
Mounting position, installation notice
Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between.  
Power factor (approx.)
> 0.99 @ 230 V AC / > 0.97 @ 115 V AC  
Protection against over-heating
Yes  
Protection against reverse voltages from the load
30…35 V DC  
Protection degree
IP20  
Short-circuit protection
Yes  

EMC / shock / vibration

Interference immunity test acc. to
EN 61000-4-2 (ESD)|EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)|EN 61000-4-11 (dips)  
Limiting of mains voltage harmonic currents
According to EN 61000-3-2  
Noise emission in accordance with EN55032
Class B  
Shock resistance IEC 60068-2-27
30 g in all directions  

Insulation coordination

Insulation voltage
3 kV input/ouput; 2 kV input/earth; 0.5 kV output/earth  
Pollution severity
2  
Protection class
I, with PE connection  

Electrical safety (applied standards)

Electrical machine equipment
Acc. to EN60204  
For use with electronic equipment
Acc. to EN50178 / VDE0160  
Protection against dangerous shock currents
Acc. to VDE0106-101  
Protective separation / protection against electrical shock
VDE0100-410 / acc. to DIN57100-410  
Safety transformers for switch-mode power supplies
According to EN 61558-2-16  

Connection data (input)

Conductor cross-section, AWG/kcmil , max.
12  
Conductor cross-section, AWG/kcmil , min.
26  
Conductor cross-section, flexible , min.
0,5  mm²
Conductor cross-section, rigid , max.
6  mm²
Conductor cross-section, rigid , min.
0,5  mm²
Connection system
Screw connection  
Number of terminals
3 for L/N/PE  
Tightening torque, max.
0,6  Nm
Tightening torque, min.
0,5  Nm
Wire connection cross section, flexible (input), max.
2,5  mm²

Connection data (output)

Conductor cross-section, AWG/kcmil , max.
12  
Conductor cross-section, AWG/kcmil , min.
26  
Conductor cross-section, flexible , max.
2,5  mm²
Conductor cross-section, flexible , min.
0,5  mm²
Conductor cross-section, rigid , max.
6  mm²
Conductor cross-section, rigid , min.
0,5  mm²
Number of terminals
6 (+,+,-,-,COM,NO)  
Tightening torque, max.
0,6  Nm
Tightening torque, min.
0,5  Nm

Signalling

Contact load (NO contact)
max. 30 V DC / 0.5 A  
Floating contact
Yes  
Relay on/off
Output voltage > 21.6 V / < 20.4 V  
Status indicator
Green LED  
red LED  

Classifications

ETIM 6.0
EC002540  
ETIM 7.0
EC002540  
ETIM 8.0
EC002540  
ETIM 9.0
EC002540  
ETIM 10.0
EC002540  
ECLASS 9.0
27-04-07-01  
ECLASS 9.1
27-04-07-01  
ECLASS 10.0
27-04-07-01  
ECLASS 11.0
27-04-07-01  
ECLASS 12.0
27-04-07-01  
ECLASS 13.0
27-04-07-01  
ECLASS 14.0
27-04-07-01  
ECLASS 15.0
27-04-07-01  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319258/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate no. (cULus)
E258476