RCMKITP-I 24VDC 2CO LD
Product image
Similar to illustration
RCMKITP-I 24VDC 2CO LD
Wiring diagram
RCMKITP-I 24VDC 2CO LD
Graph
DC load limit curve
Resistive load
RCMKITP-I 24VDC 2CO LD
Graph
Derating curve
Relay in combination with base
RCMKITP-I 24VDC 2CO LD
Graph
DC operational voltage range
RCMKITP-I 24VDC 2CO LD
Graph
Electrical service life
250 V AC resistive load
RCMKITP-I 24VDC 2CO LD
Dimensional drawing
RCMKITP-I 24VDC 2CO LD
Miscellaneous
RCMKITP-I 24VDC 2CO LD
Miscellaneous
RCMKITP-I 24VDC 2CO LD
Sonstiges
RCMKITP-I 24VDC 2CO LD

RCMKITP-I 24VDC 2CO LD

Bu ürün yakında mevcut olmayacak.

Available until: 31.01.2026

RIDERSERIES RCM, Modulo a relè, Numero di contatti: 2, Contatto di scambio AgNi, Tensione nominale: 24 V DC, Corrente permanente: 12 A, PUSH IN, Tasto di prova disponibile: Sì

Ürün No. 8921080000
Konfigüratörde aç
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 23 Münferit parçalar 4 İlgili ürünler 4
Homologaciones Dati generali per l’ordinazione Dimensions and weights Hőmérsékletek Termékek környezetvédelmi megfelelősége Côté commande Load side General data Insulation coordination Further details of approvals / standards Dati di collegamento Classifications

Homologaciones

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319234/-S800/-T1z1mm-S80) 
ROHS
Conform 

Dati generali per l’ordinazione

Version
RIDERSERIES RCM, Modulo a relè, Numero di contatti: 2, Contatto di scambio AgNi, Tensione nominale: 24 V DC, Corrente permanente: 12 A, PUSH IN, Tasto di prova disponibile: Sì 
Order No.
8921080000 
Type
RCMKITP-I 24VDC 2CO LD 
GTIN (EAN)
4032248692309 
Qty.
10 adet
Delivery status
This article will no longer be available in the future. 
Available until
31.01.2026 

Dimensions and weights

Depth
78,3 mm
깊이 (인치)
3,083 inch
Height
98 mm
Height (inches)
3,858 inch
Width
28 mm
Breite (inch)
1,102 inch
Net weight
86,75 g

Hőmérsékletek

Storage temperature
-40 °C...70 °C 
Ambient temperature
-40 °C…70 °C 
Humidity
40 °C / 93 % rel. humidity, no condensation 

Termékek környezetvédelmi megfelelősége

RoHS Compliance Status
Megfelel, kivétel nélkül 
REACH SVHC
No SVHC above 0.1 wt% 

Côté commande

Rated control voltage
24 V DC 
Rated current DC
32.8 mA 
Power rating
804 mW 
Coil resistance
777 Ω ± 10 % 
Status indicator
Green LED 
Protective circuit
Free-wheeling diode 

Load side

Rated switching voltage
240 V AC 
Dauerstrom
12 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Min. switching power
1 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
Inrush current
24 A / 20 ms 
Schaltleistung AC (ohmsch), max.
3000 VA 
DC switching capacity (resistive), max.
288 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
2 CO contact (AgNi) 
Mechanical service life
AC coil 20 x 106 switching cycles 
DC coil 30 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Mechanical switch position indicator
Yes 
Colour
black 

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
IIIa 
Clearance and creepage distances for control side - load side
≥ 4 mm 
Dielectric strength for control side - load side
2.5 kVeff / 1 Min. 
Dielectric strength of neighbouring contacts
2.5 kVeff / 1 Min. 
Dielectric strength of open contact
1.2 kVeff /1 min. 
Impulse withstand voltage
5 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (CSA) relay
249409-2426937 
Certificate no. (CSA) base
249409-2295474 
Certificate No. (DNV)
TAA000011A 
Certificate no. (cURus) relay
E522350 
Certificate no. (cURus) base
E223759 

Dati di collegamento

Wire connection method
PUSH IN 
Stripping length, rated connection
12 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,75 mm²
1,5 mm²
Wire cross-section, solid, min.
0,75 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire cross-section, solid, max. (AWG)
AWG 16 
Wire connection cross section, finely stranded, min.
0,75 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire cross-section, finely stranded, max. (AWG)
AWG 16 
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,75 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
0,75 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,75 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1 mm²
Blade size
0.6 x 3.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01