S2L 3.50/40/90G 3.5SN OR BX
Product image
S2L 3.50/40/90G 3.5SN OR BX
Product image
S2L 3.50/40/90G 3.5SN OR BX
Dimensional drawing

S2L 3.50/40/90G 3.5SN OR BX

Данный продукт больше недоступен.

PCB plug-in connector, male header, closed side, THT solder connection, 3.50 mm, Number of poles: 40, 90°, Solder pin length (l): 3.5 mm, tinned, orange, Box

Ürün No. 2559770000
Veri sayfasını indir Mühendislik desteği Ürün İndirmleri
Aksesuarlar 5 İlgili ürünler 28
Approvals General ordering data Dimensions and weights Environmental Product Compliance System specifications Material data Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Utförande
PCB plug-in connector, male header, closed side, THT solder connection, 3.50 mm, Number of poles: 40, 90°, Solder pin length (l): 3.5 mm, tinned, orange, Box 
Art.nr.
2559770000 
Typ
S2L 3.50/40/90G 3.5SN OR BX 
GTIN (EAN)
4050118668902 
Förp.
24 adet
Product data
IEC: 250 V / 10 A
UL: 150 V / 10 A 
Packaging
Box 
Leveransstatus
Discontinued 
Sista orderdatum
/Date(1793314800000)/ 

Dimensions and weights

Djup
14,2 mm
Byggdjup (tum)
0,559 inch
Höjd
14 mm
Height (inches)
0,551 inch
Height of lowest version
10,5 mm
Bredd
71,4 mm
Width (inches)
2,811 inch
Nettovikt
10,86 g

Environmental Product Compliance

RoHS-kompatibilitetsstatus
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System specifications

Produktfamilj
OMNIMATE Signal - series B2L/S2L 3.50 - 2-row 
Anslutningstyp
Board connection 
Montering på kretskortet
THT solder connection 
Delning i mm (P)
3,5 mm
Delning i tum (P)
0,138 "
Anslutningsvinkel
90° 
Antal poler
40 
Antal lödstift per pol
1 
Lödstiftlängd (l)
3,5 mm
Solder pin dimensions
d = 1.0 mm 
Octagonal 
Solder eyelet hole diameter (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
L1 in mm
66,5 mm
L1 in inches
2,62 "
Pin series quantity
2 
Touch-safe protection acc. to DIN VDE 57 106
finger-safe unplugged/ back-of-hand-safe plugged 
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Can be coded
Yes 
Plugging force/pole, max.
5 N
Pulling force/pole, max.
4 N

Material data

Isoleringsmaterial
PBT 
Färgkod
orange 
Färgtabell (jämförbar)
RAL 2000 
Isoleringsmaterialgrupp
IIIa 
CTI (Comparative Tracking Index)
≥ 200 
UL 94 flammability rating
V-0 
Kontaktmaterial
Cu-alloy 
Kontaktyta
tinned 
Layer structure of solder connection
2...3 µm Ni / 5...7 µm Sn glossy 
Storage temperature, min.
−40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
−50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
−30 °C
Temperature range, installation, max.
100 °C

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Märkström, min. antal poler (Tu=20°C)
10 A
Märkström, max. antal poler (Tu=20°C)
10 A
Märkström, min. antal poler (Tu=40°C)
9 A
Märkström, max. antal poler (Tu=40°C)
8,5 A
Märkspänning vid överspänningsk./Nedsmutsningsgrad II/2
250 V
Märkspänning vid överspänningsk./Nedsmutsningsgrad III/2
125 V
Märkspänning vid överspänningskat./Nedsmutsningsgrad III/3
80 V
Märkspänning vid överspänningsk./Nedsmutsningsgrad II/2
2,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
2,5 kV
Märkstötspänning vid överspänningsk./Nedsmutsningsgrad III/3
2,5 kV
Korttidströmhållfasthet
3 x 1s with 77 A 

Rated data acc. to CSA

Märkspänning (användargrupp B / CSA)
150 V
Märkström (användargrupp B / CSA)
5 A

Rated data acc. to UL 1059

Märkspänning (användargrupp B / UL 1059)
150 V
Märkström (användargrupp B / UL 1059)
10 A

Packing

Förpackning
Box 
VPE-längd
350 mm
VPE-bredd
135 mm
VPE-höjd
30 mm

Important note

IPC-konformitet
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Hänvisningstext
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Spacing between rows: see hole layout
  • Rated current related to rated cross-section & min. No. of poles.
  • Diameter of solder eyelet D = 1.3+0.1 mm
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002637 
ETIM 9.0
EC002637 
ETIM 10.0
EC002637 
ECLASS 14.0
27-46-02-01 
ECLASS 15.0
27-46-02-01