SCS 24VDC P2SIL3DSES
SCS 24VDC P2SIL3DSES
Wiring diagram
SCS 24VDC P2SIL3DSES
DC load limit curve
SCS 24VDC P2SIL3DSES
Dimensioned drawing
SCS 24VDC P2SIL3DSES
Miscellaneous
Type codes

SCS 24VDC P2SIL3DSES

SAFESERIES, Safety relay,24 V DC -15 / +20%, 35 mA , Max. switching current, internal fuse : 5 A (refer to derating curve), SIL 3, DIN EN 61508

Tuotteen tunnus 1319270000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 19 Samankaltaiset tuotteet 1
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input (safety circuit) Test inputs (safety circuit) Output (safety circuit) Safety-related basic specifications General data Insulation coordination Further details of approvals / standards Connection data Classifications Approvals

General ordering data

Version
SAFESERIES, Safety relay,24 V DC -15 / +20%, 35 mA , Max. switching current, internal fuse : 5 A (refer to derating curve), SIL 3, DIN EN 61508  
Order No.
1319270000  
Type
SCS 24VDC P2SIL3DSES  
GTIN (EAN)
4050118125115  
Qty.
1  items

Dimensions and weights

Depth
114,1  mm
Depth (inches)
4,492  inch
Height
117,3  mm
Height (inches)
4,618  inch
Width
22,5  mm
Width (inches)
0,886  inch
Net weight
200  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-25 °C...50 °C  
Humidity
40 °C / 93 % rel. humidity, no condensation  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
807f1906-ce90-4f93-8801-4b128b343e6b  

Input (safety circuit)

Connection designation (safety circuit)
A1  
A2  
Rated control voltage
24 V DC -15 / +20%  
Current consumption
45  mA
Guaranteed current consumption of 24 VDC -10%
35  mA
Inrush current
≤ 80 mA / 40 ms  
Pull-in/drop-out voltage DC coil
17 V / 12.5 V (DTS)  
Status indicator
LED yellow  
Protective circuit
Rectifier  

Test inputs (safety circuit)

Connection designation (safety test)
X1  
X2  
X3  
Rated control voltage
24 V DC  
Number of test inputs
2  
Status indicator
LED red flashing: test input is triggered  

Output (safety circuit)

Connection designation (safety output)
F  
13  
14  
23  
24  
Output voltage frequency range
45…65 Hz  
Contact design
1 x de-energised to safe (NO contact)  
1 x energised to safe (NO contact)  
Contact base material
AgNi 0.15 gold flashed  
Max. permitted switching voltage
250 V AC  
Max. permitted switching current
5 A  
Max. switching current, internal fuse
5 A (refer to derating curve)  
Max. switching current, external fuse
5 A (refer to derating curve)  
Max. switching capacity
1250 VA  
Internal fuse
5 A time-lag  
External back-up fuse
5 A time-lag  
Short circuit resistance
No  
Switch-on time
<5.5 ms (DTS)  
<5 ms (ETS)  
Switch-off time
<4 ms (DTS)  
<4 ms (ETS)  
Min. switching capacity
10 mA @ 12 V  

Safety-related basic specifications

Device type
A  
Hardware fault tolerance (HFT)
1  
Safety category
SIL 3  
Safety standard
DIN EN 61508  

General data

Operating altitude
≤ 2000 m  
above sea level  
Rail
TS 35  
Colour
black  
yellow  

Insulation coordination

Rated voltage
300  V
Pollution severity
2  
Surge voltage category
III  
Clearance and creepage distances for control side - load side
≥ 5.5 mm  
Dielectric strength for control side - load side
4 kVeff / 1 min  
Dielectric strength to mounting rail
4 kVeff / 1 Min.  
Impulse withstand voltage
6 kV (1.2/50 µs)  
Protection degree
IP20  

Further details of approvals / standards

Standards
EN 61000  
EN 61326-3-2  

Connection data

Wire connection method
Screw connection  
Stripping length, rated connection
8  mm
Tightening torque, min.
0,4  Nm
Tightening torque, max.
0,6  Nm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,13  mm²
Clamping range, max.
2,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 12  
Wire cross-section, solid, min.
0,2  mm²
Wire cross-section, solid, max.
2,5  mm²
Wire connection cross section, finely stranded, min.
0,2  mm²
Wire connection cross section, finely stranded, max.
2,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,2  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,2  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2,5  mm²
Blade size
size PH0  

Classifications

ETIM 6.0
EC001449  
ETIM 7.0
EC001449  
ETIM 8.0
EC001449  
ETIM 9.0
EC001449  
ETIM 10.0
EC001449  
ECLASS 9.0
27-37-18-19  
ECLASS 9.1
27-37-18-19  
ECLASS 10.0
27-37-18-19  
ECLASS 11.0
27-37-18-19  
ECLASS 12.0
27-37-18-19  
ECLASS 13.0
27-37-18-19  
ECLASS 14.0
27-37-18-19  
ECLASS 15.0
27-37-18-19  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319238/-S800/-T1z1mm-S80)  
ROHS
Conform