VPU ZPA S I 3+1 R 300/12,5
Product image
Similar to illustration
VPU ZPA S I 3+1 R 300/12,5
Electric symbol
Circuit diagram

VPU ZPA S I 3+1 R 300/12,5

Surge voltage arrester, Low voltage, Leakage-current-free, TN-C-S, TN-S, TT, IT with N, IT without N

Ürün No. 2830910000
Veri sayfasını indir Mühendislik desteği Ürün İndirmleri
Aksesuarlar 3 İlgili ürünler 6
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Datos de conexión mensaje remoto Caractéristiques générales IEC / EN névleges adatok Connection data Electrical data General data Guarantee Important note Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/756ea985-024d-4142-85a7-acc2e9775394/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, Leakage-current-free, TN-C-S, TN-S, TT, IT with N, IT without N 
Order No.
2830910000 
Type
VPU ZPA S I 3+1 R 300/12,5 
GTIN (EAN)
4064675390091 
Qty.
1 adet

Dimensions and weights

Depth
236 mm
Depth (inches)
9,291 inch
Height
236 mm
Height (inches)
9,291 inch
Width
36 mm
Width (inches)
1,417 inch
Net weight
638 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
…85 °C 
Operating temperature
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Datos de conexión mensaje remoto

Anschlussart
PUSH IN 
Anzugsdrehmoment max.
0,4 Nm
Leiteranschlussquerschnitt, eindrähtig, max.
1,5 mm²
Leiteranschlussquerschnitt, eindrähtig, min.
0,25 mm²

Caractéristiques générales

Ausführung
Szivárgási áram mentes 
Einsatzhöhe
≤ 4000 m 
Farbe
grey 
Hilfskontakt
No 
Optische Funktionsanzeige
green = OK; red = arrester is defective - replace 
Schutzart
IP20 
Segment
Power distribution 
Tragschiene
Busbar 

IEC / EN névleges adatok

Combined pulse UOC
6 kV
Discharge current Imax (8/20µs) N-PE
100 kA 
Discharge current In (8/20µs) N-PE
80 kA 
Energy coordination (≤10 m)
类型 I 
类型 II 
类型 III 
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse protection
No Fuse neccessary ≤160 A gG 
Integrated back-up fuse
No 
Leakage current at Un
5 µA
Lightning test current Iimp (10/350 µs) (L-PE)
12,5 kA
Lightning test current, Iimp (10/350 µs) (N-PE)
50 kA 
Low voltage network
TN-C-S 
TN-S 
TT 
IT with N 
IT without N 
Mains voltage
230 V / 400 V 
Max. continuous voltage, Uc (N-PE)
305 V
Number of poles
4 
PE conductor current IPE
5 µA
Protection level Up at IN (L/N-PE)
≤ 1.5 kV 
Rated voltage (AC)
240 V
Requirements category acc. to IEC 61643-11
Type I 
Type II 
Type III 
Requirements class, acc. to EN 61643-11
T1 
T2 
T3 
Response time / fallback time
≤ 100 ns 
Short-circuit current rating ISCCR
25 kA
Signalling contact
250 V 1A 1CO 
SPD type
T1 
T2 
T3 
Voltage type
AC 

Connection data

Stripping length
18 mm
Leiteranschlusstechnik
Screw connection 
Anschlussart
Screw connection 
Tightening torque, max.
4,5 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
4 mm²
Clamping range, max.
35 mm²
Wire cross-section, solid, min.
16 mm²
Wire cross-section, solid, max.
35 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
16 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
25 mm²
Connection cross-section, stranded, min.
16 mm²
Connection cross-section, stranded, max.
35 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
4 
Protection degree
IP20 
Colour
grey 

Guarantee

Zeitraum
5 years 

Important note

Product information

Only applicable to IT power systems where the earth on the distribution transformer is interconnected with the earth on the consumer side (RE=RA in Figure 44.A1 of IEC 60634-4-44:2018). 

Classifications

ETIM 8.0
EC001457 
ETIM 9.0
EC001457 
ETIM 10.0
EC001457 
ECLASS 14.0
27-17-12-04 
ECLASS 15.0
27-17-12-04