WGK 25 VP/Z BK BX
Product image
Similar to illustration
WGK 25 VP/Z BK BX
Dimensional drawing
WGK 25 VP/Z BK BX
Derating curve

WGK 25 VP/Z BK BX

OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)

Tuotteen tunnus 2444790000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 6 Samankaltaiset tuotteet 8
General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications Approvals

General ordering data

Version
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 25 mm², Wemid (PA), Direct mounting, Feed-through (bushing)  
Order No.
2444790000  
Type
WGK 25 VP/Z BK BX  
GTIN (EAN)
4050118480238  
Qty.
50  items
Product data
IEC: 690 V / 101 A / 6 - 35 mm²
UL: 600 V / 100 A / AWG 10 - AWG 3  
Packaging
Box  

Dimensions and weights

Height
48,5  mm
Height (inches)
1,909  inch
Height of lowest version
48,5  mm
Width
19,7  mm
Width (inches)
0,776  inch
Length
19,66  mm
Length (inches)
0,774  inch
Net weight
47,24  g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

System parameters

Product family
OMNIMATE Power - series WGK  
Wire connection method
Cable lug: ring cable / spade lug  
Conductor outlet direction
180°  
Number of poles
1  
Pin series quantity
1  
Fitted by customer
Yes  
Screwdriver blade
1.2 x 6.5  
Tightening torque, min.
4  Nm
Tightening torque, max.
4,5  Nm
Clamping screw
M 6  
Stripping length
18  mm
Touch-safe protection acc. to DIN VDE 0470
IP 20  
Protection degree
IP20  
Type of connection 1
Clamping yoke  
Type of connection 2
Screw connection  

Material data

Insulating material
Wemid (PA)  
Colour
black  
Colour chart (similar)
RAL 9011  
UL 94 flammability rating
V-0  
Contact material
Cu-alloy  
Contact surface
tinned  
Storage temperature, min.
−40  °C
Storage temperature, max.
70  °C
Operating temperature, min.
−50  °C
Operating temperature, max.
120  °C
Temperature range, installation, min.
−25  °C
Temperature range, installation, max.
120  °C

Conductors suitable for connection

Clamping range, min.
4  mm²
Clamping range, max.
35  mm²
Wire connection cross section AWG, min.
AWG 10  
Wire connection cross section AWG, max.
AWG 3  
Solid, min. H05(07) V-U
6  mm²
Solid, max. H05(07) V-U
16  mm²
Stranded, min. H07V-R
10  mm²
Stranded, max. H07V-R
35  mm²
Flexible, min. H05(07) V-K
10  mm²
Flexible, max. H05(07) V-K
25  mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
4  mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
25  mm²
w. wire end ferrule, DIN 46228 pt 1, min.
4  mm²
w. wire end ferrule, DIN 46228 pt 1, max.
25  mm²
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004110000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004130000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      10 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0379300000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      25 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0375300000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage.  
The outside diameter of the plastic collar should not be larger than the pitch (P)  

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1  
Rated current, min. number of poles (Tu=20°C)
101  A
Rated current, max. number of poles (Tu=20°C)
101  A
Rated voltage for surge voltage class / pollution degree III/3
690  V
Rated impulse voltage for surge voltage class/ contamination degree III/3
6  kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
600  V
Rated voltage (Use group C / CSA)
600  V
Rated voltage (Use group D / CSA)
300  V
Rated current (Use group B / CSA)
100  A
Rated current (Use group C / CSA)
100  A
Rated current (Use group D / CSA)
10  A
Wire cross-section, AWG, min.
AWG 10  
Wire cross-section, AWG, max.
AWG 3  

Rated data acc. to UL 1059

Institute (cURus)
CURUS  
Certificate No. (cURus)
E60693  
Rated voltage (Use group B / UL 1059)
600  V
Rated voltage (Use group C / UL 1059)
600  V
Rated voltage (Use group D / UL 1059)
300  V
Rated current (Use group B / UL 1059)
100  A
Rated current (Use group C / UL 1059)
100  A
Rated current (Use group D / UL 1059)
10  A
Wire cross-section, AWG, min.
AWG 10  
Wire cross-section, AWG, max.
AWG 3  
Reference to approval values
Specifications are maximum values, details - see approval certificate.  

Packing

Packaging
Box  
VPE length
336  mm
VPE width
170  mm
VPE height
77  mm

Important note

Notes
  • Clearance and creepage distances to other components must be devised in accordance with the relevant application standard. This can be achieved in the device by full encapsulation or by the use of additional spacer plates.
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Colours: SW = black; GN/YL = green/yellow; GY = grey
  • Additional variants on request
  • WGK: Rated voltage plastic walls: 1 - 6 mm = 800 V; metal walls: 1 - 4 mm = 800 V; metal walls: 4 - 6 mm = 690 V
  • WGKV: Rated voltage plastic walls: 1 - 6 mm = 800 V; metal walls: 1 - 4 mm = 800 V; metal walls: 4 - 6 mm = 690 V
  • WGK…VP: Rated voltage plastic walls: 1 - 6 mm = 800 V; metal walls: 1 - 2.5 mm = 800 V; metal walls: 2.5 - 4 mm = 690 V; metal walls: 4 - 6 mm = 500 V
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 6.0
EC001283  
ETIM 7.0
EC001283  
ETIM 8.0
EC001283  
ETIM 9.0
EC001283  
ETIM 10.0
EC001283  
ECLASS 9.0
27-14-11-34  
ECLASS 9.1
27-14-11-34  
ECLASS 10.0
27-14-11-34  
ECLASS 11.0
27-14-11-34  
ECLASS 12.0
27-14-11-34  
ECLASS 13.0
27-14-11-34  
ECLASS 14.0
27-14-11-34  
ECLASS 15.0
27-14-11-34  

Approvals

Approvals
![CURUS](/picture/CURUS.gif)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate No. (cURus)
E60693