CH20M45 B FE BL/OR 2013
Product image
CH20M45 B FE BL/OR 2013
Product image
CH20M45 B FE BL/OR 2013
Product benefits
Base element including FE cut-out
CH20M45 B FE BL/OR 2013
Dimensioned drawing

CH20M45 B FE BL/OR 2013

Dette produkt er snart ikke længere tilgængeligt.

Alternative produkt: 1177030000

Modular housing, OMNIMATE Housing - series CH20M light blue, Base element, Recess in the detent foot area for FE contact, Width: 45 mm

Produkt ID 2579680000
Åbn i konfiguratoren
Download datablad Engineering-support Produktdownloads
Tilbehør 2 Anvendte produkter 5
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Material data General data Assembly properties Mechanical tests Thermal tests Właściwości komponentu Design - IN requirements Individualization options Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Modular housing, OMNIMATE Housing - series CH20M light blue, Base element, Recess in the detent foot area for FE contact, Width: 45 mm 
Order No.
2579680000 
Type
CH20M45 B FE BL/OR 2013 
GTIN(EAN)
4050118588637 
수량
6 Styk
Delivery status
This article will no longer be available in the future. 
Last order date
/Date(1774908000000)/ 
Alternative product
[1177030000](~/p/1177030000) 

Dimensions and weights

Depth
108 mm
Depth (inches)
4,252 inch
Height
109,3 mm
Height (inches)
4,303 inch
Width
45 mm
Width (inches)
1,772 inch
Net weight
18,5 g

Temperatures

Ambient temperature
-25 °C…85 °C 
Operating temperature range
-40...120 ℃ 
Humidity
5 - 93% rel. humidity, Tu = 40°C, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Material data

Grado inflamabilidad según UL 94
V-0 
Grupo de materiales aislantes
I 
Material básico
Plastic 
Materiales aislantes
PA 66 GF 30 
Superficie
untreated 
Índice de resistencia al encaminamiento eléctrico (CTI)
600 ≤ CTI 

General data

Capacidad de sellado
No 
Carril de montaje
TS 35 
Carta de colores (similar)
RAL 5012 
Color
light blue 
Tipo de protección
IP20 in installed state 

Assembly properties

Número de ranuras para conectores hembra del conjunto montado, máx.
12 
Número de placas de circuitos impresos, máx.
2 
Número de niveles de conexión, máx.
3 
Number of poles, max.
48 
Altezza dei componenti sul PCB (utilizzo di 1 PCB), max.
38,6 mm
Altezza dei componenti sul PCB (utilizzo di 2 PCB), max.
34,7 mm
Tipo di montaggio del circuito stampato
double-sided 

Mechanical tests

According to Standard
DIN EN 61373:1999 (shock and vibration) 
Test conditions
five housings installed in a row 
200g additional weight per PCB 
two PCB mounted 
Proved axles
X 
Y 
Z 
Shock test
  • General test advices:
    All mechanical tests were tested on examplary setup, or in view of depending regulation. The specified results do not replace approval relevant tests. They are just orientation values.
  • Test category:
    1
  • Number of shocks per axle:
    3 in positive and negative direction
  • Shock duration:
    30 ms
  • Acceleration horizontal:
    30 m/s²
  • Acceleration vertical:
    30 m/s²
  • Acceleration longitudinal:
    50 m/s²
Prova di vibrazione
  • Test category:
    1B
  • Test duration:
    5 hours per axle
  • Effective acceleration:
    7,9 m/s²

Thermal tests

Thermal tests
  • General test advices:
    All thermal tests were tested on examplary setup, or in view of depending regulation. The specified results do not replace approval relevant tests. They are just orientation values.
  • Test conditions:
    seven housings installed in a row - no spacing
  • Test axles:
    horizontal
  • Ambient temperature:
    55 °C
  • Power dissapation, max.:
    4,2 W
  • Ambient temperature:
    50 °C
  • Power dissapation, max.:
    4,8 W
  • Ambient temperature:
    40 °C
  • Power dissapation, max.:
    5,9 W
  • Ambient temperature:
    20 °C
  • Power dissapation, max.:
    8,25 W

Właściwości komponentu

Anzahl Anschlussebenen max.
3 
Aussparung im Rastfußbereich als Vorbereitung für
FE contact 
contact not included! 
Farbe Rastfuß
orange 

Design - IN requirements

PCB thickness
1,6 mm
Tolerance for the PCB shape
±0.1 mm 
Tolerance of circuit board thickness
±0.15 mm 

Individualization options

Alternitive colours
Więcej na życzenie 
Customer specific labelling possible
Yes 
Customer specific order process
See guideline under downloads 
Processing possibilities
Laser processing 

Important note

Product information
Circuit board contour, restricted zones, and other information for the design in of the circuit board can be found in the category connection technology under the corresponding male headers in the downloads. 

Classifications

ETIM 8.0
EC001031 
ETIM 9.0
EC001031 
ETIM 10.0
EC001031 
ECLASS 14.0
27-19-06-01 
ECLASS 15.0
27-19-06-01