LL 5.08/05/90 3.2SN OR BX
Zdjęcie produktu
LL 5.08/05/90 3.2SN OR BX
Produktillustration
LL 5.08/05/90 3.2SN OR BX
Dimensional drawing
LL 5.08/05/90 3.2SN OR BX
Graph
LL 5.08/05/90 3.2SN OR BX
Graph
LL 5.08/05/90 3.2SN OR BX
Graph

LL 5.08/05/90 3.2SN OR BX

Printed circuit board terminals, 5.08 mm, Number of poles: 5, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box

항목 번호 1001860000
데이터 시트 다운로드 엔지니어링 지원 제품 다운로드
관련 제품 22
Approvals General ordering data Dimensions and weights Environmental Product Compliance Системные параметры Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA UL 1059에 따른 정격 데이터 Packaging 유형 테스트 중요 참고 사항 분류

Approvals

인증
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/70d4994d-1e1f-4a62-8b8a-96bcbd57aca3/DAP_Master_ICON,w_80,q_80) 
ROHS
준수 
UL File Number Search
[UL 웹사이트](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
인증 번호(UR)
E60693 

General ordering data

버전
Printed circuit board terminals, 5.08 mm, Number of poles: 5, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box 
주문 번호
1001860000 
유형
LL 5.08/05/90 3.2SN OR BX 
GTIN(EAN)
4032248693825 
수량
66 items
Product data
IEC: 500 V / 32.5 A / 0.5 - 6 mm²
UL: 300 V / 20 A / AWG 26 - AWG 12 
Packaging
Box 

Dimensions and weights

깊이
11 mm
Depth (inches)
0.433 inch
높이
20.3 mm
높이 (인치)
0.799 inch
가장 낮은 버전의 높이
17.1 mm
너비
26.05 mm
폭 (인치)
1.026 inch
Net weight
6.015 g

Environmental Product Compliance

RoHS 준수 상태
Compliant without exemption 
REACH SVHC
0.1 wt% 이상의 SVHC 없음 

Системные параметры

제품군
OMNIMATE Signal – serie LL 
와이어 결선 방식
클램프 요크 결선 
속성, 클램핑 포인트
WireReady 
PCB에 장착
THT 용접 결선 
도체 아웃렛 방향
90° 
피치(mm)(P)
5.08 mm
피치(인치)(P)
0.2 "
Number of poles
5 
Pin series quantity
1 
고객 맞춤
예 
행 수
1 
층당 최대 인접 폴
24 
Forrasztótüske hossza (l)
3.2 mm
솔더핀 크기
0.75 x 0.9 mm 
솔더 구멍 직경(D)
1.3 mm
Tolérance du diamètre du trou d'implantation (D)
+ 0,1 mm 
Forrasztótüskék száma pólusonként
1 
Lama cacciavite
0.6 x 3.5 
Punta de destornillador normativa
DIN 5264 
Tightening torque, min.
0.5 Nm
Couple de serrage, max.
0.6 Nm
Vis de serrage
M 3 
Lunghezza di spellatura
6 mm
L1 in mm
20.32 mm
L1 in pollici
0.8 "
Protezione da contatto accidentale secondo DIN VDE 0470
IP 20 
Protezione da contatto accidentale DIN VDE 57 106
sicurezza per le dita 
Protection degree
IP20 
Volume resistance
1.20 mΩ 

Material data

Insulating material
Wemid (PA) 
컬러 코드
주황색 
Colour chart (similar)
RAL 2000과 유사 
Insulating material group
I 
Comparative Tracking Index (CTI)
≥ 600 
UL 94 flammability rating
V-0 
Contact material
구리 합금 
Contact surface
주석 도금 
Coating
4-6 μm SN 
Tinning type
matný povrch 
Layer structure of solder connection
4...6 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

Klemmbereich, min.
0.13 mm²
Upínací rozsah, max.
6 mm²
Wire connection cross section AWG, min.
AWG 26 
결선 단면규격 AWG, 최대
AWG 12 
Solid, min. H05(07) V-U
0.5 mm²
Solid, max. H05(07) V-U
6 mm²
Flexible, min. H05(07) V-K
0.5 mm²
Flexible, max. H05(07) V-K
4 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
2.5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0.5 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2.5 mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.8 mm x 2.4 mm; 3.0 mm 
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409500000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409700000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
Testo di riferimento
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
32.5 A
Rated current, max. number of poles (Tu=20°C)
26 A
Rated current, min. number of poles (Tu=40°C)
27.5 A
Rated current, max. number of poles (Tu=40°C)
22 A
Rated voltage for surge voltage class / pollution degree II/2
500 V
Rated voltage for surge voltage class / pollution degree III/2
320 V
Rated voltage for surge voltage class / pollution degree III/3
250 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
4 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
4 kV
Short-time withstand current resistance
3 x 1s, 120 A 

Rated data acc. to CSA

Instituto (CSA)
CSA 
Núm. de certificación (CSA)
200039-1202191 
정격 전압(사용 그룹 B / CSA)
300 V
정격 전압(사용 그룹 D / CSA)
300 V
정격 전류(사용 그룹 B / CSA)
20 A
정격 전류(사용 그룹 D / CSA)
10 A
와이어 단면적, AWG, 최소
AWG 26 
와이어 단면적, AWG, 최대
AWG 12 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

UL 1059에 따른 정격 데이터

협회(UR)
UR 
인증 번호(UR)
E60693 
정격 전압(사용 그룹 B / UL 1059)
300 V
Tensión nominal (Use Group D / UL 1059)
300 V
정격 전류(사용 그룹 B / UL 1059)
20 A
Intensidad nominal (Use Group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 26 
와이어 단면적, AWG, 최대
AWG 12 
Référence aux valeurs approuvées
Specifications are maximum values, details - see approval certificate. 

Packaging

패키징
박스 
VPE 길이
350 mm
VPE 폭
141 mm
VPE 높이
33 mm

유형 테스트

테스트: 표시 내구성
  • 테스트:
    원산지 표시, 유형 식별, 재질 유형, 승인 마킹 UL, 승인 마킹 CSA, 내구성
  • 평가:
    사용 가능
테스트: 클램프 사용 가능한 단면
  • Standard:
    IEC 60999-1 section 7 and 9.1 / 11.99, IEC 60947-1 section 8.2.4.5.1 / 03.11
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.14 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.14 mm²
    • Type of conductor and conductor cross-section:
      H07V-U4.0
    • Type of conductor and conductor cross-section:
      H07V-K4
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
    • Type of conductor and conductor cross-section:
      AWG 12/1
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed
컨덕터의 손상 및 의도치 않은 느슨해짐 테스트
  • Standard:
    IEC 60999-1 section 9.4 / 11.99
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    0.9 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U4.0
    • Type of conductor and conductor cross-section:
      H07V-K4.0
    • Type of conductor and conductor cross-section:
      AWG 12/1
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed
풀아웃 테스트
  • Standard:
    IEC 60999-1 section 9.5 / 11.99
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    ≥60 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U4.0
    • Type of conductor and conductor cross-section:
      H07V-K4.0
    • Type of conductor and conductor cross-section:
      AWG 12/1
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed

중요 참고 사항

IPC 준수
적합성:본 제품은 국제 공인 표준 및 기준에 따라 개발, 제조 및 납품되고, 해당 데이터 시트에 명시된 보증 특성을 준수하며 IPC-A-610 "Class 2"에 따른 디자인 특성을 충족합니다. 본 제품에 대한 추가 클레임은 요청 시 검토할 수 있습니다. 
참고 사항
  • 정격 단면적 기준 정격 전류 및 최소 폴 수.
  • DIN 46228/1 규격 플라스틱 슬리브 미포함 와이어 종단 페룰
  • DIN 46228/4 규격 플라스틱 슬리브 포함 와이어 종단 페룰
  • 도면의 P = 피치
  • 정격 데이터는 콤포넌트 자체에만 적용됩니다. 다른 콤포넌트에 대한 간격 및 크리피지(creepage) 거리는 해당 적용 분야 표준에 따라 설계되어야 합니다.
  • 평균 온도 50 °C 및 최대 습도 70% 조건에서 36개월간 제품 장기 보관
 

분류

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01