LM2NZF 5.08/34/135 3.5SN OR BX
Product image
Similar to illustration
LM2NZF 5.08/34/135 3.5SN OR BX
Dimensional drawing
LM2NZF 5.08/34/135 3.5SN OR BX
Graph

LM2NZF 5.08/34/135 3.5SN OR BX

Printed circuit board terminals, 5.08 mm, Number of poles: 34, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box

Ürün No. 1782540000
Veri sayfasını indir Ürün İndirmleri Mühendislik desteği
İlgili ürünler 19
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Változat
Printed circuit board terminals, 5.08 mm, Number of poles: 34, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box 
주문 번호
1782540000 
Típus
LM2NZF 5.08/34/135 3.5SN OR BX 
GTIN(EAN)
4032248177660 
Förp.
10 adet
Product data
IEC: 630 V / 15 A / 0.2 - 2.5 mm²
UL: 300 V / 10 A / AWG 24 - AWG 14 
Packaging
Box 

Dimensions and weights

Mélység
24,05 mm
Byggdjup (tum)
0,947 inch
Posizione verticale
29,1 mm
Height (inches)
1,146 inch
Height of lowest version
25,6 mm
Szélesség
87,06 mm
Width (inches)
3,428 inch
순중량
49 g

Environmental Product Compliance

RoHS 준수 상태
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LMZF 
Wire connection method
Tension-clamp connection 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
135° 
Pitch in mm (P)
5,08 mm
Pitch in inches (P)
0,2 "
Number of poles
34 
Polradstal
2 
Fitted by customer
No 
Number of rows
2 
Solder pin length (l)
3,5 mm
Dimensions du picot à souder
0.7 x 1.0 mm 
Solder eyelet hole diameter (D)
1,3 mm
Tolerans diameter bestyckningshål (D)
+ 0,1 mm 
Antal lödstift per pol
1 
Skruvmejselklinga
0.6 x 3.5 
Screwdriver blade standard
DIN 5264-A 
Stripping length
7,5 mm
L1 in mm
81,28 mm
L1 in inches
3,2 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
IP20 
Volume resistance
2.10 mΩ 

Material data

절연재
PA 
Färgkod
orange 
Таблица цветов (аналогич.)
RAL 2000 
Isoleringsmaterialgrupp
I 
CTI (Comparative Tracking Index)
≥ 600 
Brännbarhetsklass enligt UL 94
V-0 
접점 재질
Cu-alloy 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

클램프 범위, 최소
0,13 mm²
클램프 범위, 최대
2,5 mm²
Ledardiameter, AWG, min.
AWG 24 
결선 단면규격 AWG, 최대
AWG 14 
entrådig, min. H05(07) V-U
0,2 mm²
entrådig, max. H05(07) V-U
2,5 mm²
fintrådig, min. H05(07) V-K
0,2 mm²
fintrådig, max. H05(07) V-K
1,5 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최소
0,25 mm²
med ändhylsa med krage DIN 46 228/4, max.
1,5 mm²
med ändhylsa, DIN 46228 pt 1, min.
0,25 mm²
페럴 포함, DIN 46228 pt 1, 최대
1,5 mm²
Passtift enligt EN 60999 a x b; ø
2.4 mm x 1.5 mm 
Anslutningsbar ledare
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0372700000
Referenstext
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Märkström, min. antal poler (Tu=20°C)
15 A
Märkström, max. antal poler (Tu=20°C)
12 A
정격 전류, 극 수(Tu=40°C)
13 A
Märkström, max. antal poler (Tu=40°C)
10 A
Märkspänning vid överspänningsk./Nedsmutsningsgrad II/2
630 V
Märkspänning vid överspänningsk./Nedsmutsningsgrad III/2
320 V
Märkspänning vid överspänningskat./Nedsmutsningsgrad III/3
250 V
Märkspänning vid överspänningsk./Nedsmutsningsgrad II/2
4 kV
Märkspänning vid överspänningsk./Nedsmutsningsgrad III/2
4 kV
Märkstötspänning vid överspänningsk./Nedsmutsningsgrad III/3
4 kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
10 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 14 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
Märkspänning (användargrupp D / UL 1059)
300 V
Courant nominal (groupe d'utilisation B / UL 1059)
10 A
Märkström (användargrupp D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 14 

Packing

Verpackung
Box 
VPE length
179 mm
VPE width
110 mm
VPE height
48 mm

Important note

IPC 준수
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
참고 사항
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01