DRMKITP 230VAC 2CO LD
Product image
Similar to illustration
DRMKITP 230VAC 2CO LD
Wiring diagram
DRMKITP 230VAC 2CO LD
Graph
DC load limit curve
Resistive load
DRMKITP 230VAC 2CO LD
Graph
Electrical service life
DRMKITP 230VAC 2CO LD
Graph
Derating curve
DRMKITP 230VAC 2CO LD
Graph
AC operational voltage range
DRMKITP 230VAC 2CO LD
Dimensional drawing
Relay in combination with base
DRMKITP 230VAC 2CO LD
Miscellaneous
Type codes

DRMKITP 230VAC 2CO LD

D-SERIES DRM, Interface relais, Nombre des contacts: 2, Inverseur AgNi flash doré, Tension nominale: 230 V AC, Courant permanent: 10 A, PUSH IN, Levier de forçage disponible: Non

Produkt ID 2576030000
Åbn i konfiguratoren
Download datablad Engineering Support Product Downloads
Tilbehør 13 Enkeltdele 3 Anvendte produkter 8
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Lado de mando Strona obciążenia General data Координация изоляции Further details of approvals / standards Caractéristiques de raccordement Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRM, Interface relais, Nombre des contacts: 2, Inverseur AgNi flash doré, Tension nominale: 230 V AC, Courant permanent: 10 A, PUSH IN, Levier de forçage disponible: Non 
Order No.
2576030000 
Type
DRMKITP 230VAC 2CO LD 
GTIN (EAN)
4050118585780 
Qty.
10 Styk

Dimensions and weights

Depth
82,3 mm
Mélység (coll)
3,24 inch
Height
101,8 mm
Height (inches)
4,008 inch
Width
30,6 mm
Width (inches)
1,205 inch
Nettogewicht
97,5 g

Temperatures

Storage temperature
-40 °C...70 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Lado de mando

Rated control voltage
230 V AC 
Rated current AC
6.1 mA (50 Hz) 
5.2 mA (60 Hz) 
Power rating
1.0...1.2VA (60HZ) 
Coil resistance
16000 Ω ± 10 % 
Status indicator
red LED 

Strona obciążenia

Rated switching voltage
250 V AC 
Continuous current
10 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Min. switching power
10 mA @ 12 V 
100 mA @ 5 V 
Inrush current
20 A / 50 ms 
AC switching capacity (resistive), max.
2500 VA 
DC switching capacity (resistive), max.
240 W @ 24 V 
Einschaltverzögerung
<20 ms 
Switch-off delay
<20 ms 
Contact type
2 CO contact (AgNi flash gold-plated) 
Mechanical service life
20 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
No 
Mechanical switch position indicator
Yes 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Pusher
  • UL94 flammability rating:
    HB
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    HB
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Координация изоляции

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
C 
Clearance and creepage distances for control side - load side
≥ 5.5 mm 
Dielectric strength for control side - load side
1.8 kVeff /1 min. 
Dielectric strength of neighbouring contacts
1 kVeff / 1 min 
Dielectric strength of open contact
1 kVeff / 1 min 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E355547 

Caractéristiques de raccordement

Wire connection method
PUSH IN 
Stripping length, rated connection
10 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,14 mm²
1,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Wire cross-section, solid, min.
0,14 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire connection cross section, finely stranded, min.
0,14 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,14 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Blade size
0.4 x 2.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01