VPU AC II+III 0 L-N 440/20 S        
VPU AC II+III 0 L-N 440/20 S        
Electric symbol
Schematic circuit diagram

VPU AC II+III 0 L-N 440/20 S        

Surge voltage arrester, Low voltage, Spare arrester, TN-S, TT

Product ID 2908540000
Gegevensblad downloaden Product Downloads
Toebehoren 1 Is accessoire van 8 Verwante producten 3
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert Dati generali Insulation coordination acc. to EN 50178 정격 데이터 IEC / EN Dane przyłączeniowe Electrical data General data Guarantee Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, Spare arrester, TN-S, TT 
Référence
2908540000 
Type
VPU AC II+III 0 L-N 440/20 S         
GTIN (EAN)
4099986190955 
Cantidad
1 items

Dimensions and weights

Depth
54 mm
Depth (inches)
2,126 inch
Height
45,3 mm
Height (inches)
1,783 inch
Width
18 mm
Width (inches)
0,709 inch
Net weight
89 g

Temperatures

Ambient temperature
-40 °C…85 °C 
Operating temperature
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS-Konformitätsstatus
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Connection type
PUSH IN 

Dati generali

Colour
회색 
Design
Installation housing; 1TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 2000 m 
≤ 4000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 in installed state 
Segment
Power distribution 
UL 94 flammability rating
V-0 
Version
Spare arrester 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

정격 데이터 IEC / EN

Combined pulse UOC
6 kV
Discharge current (type III)
3 kA
Discharge current Imax (8/20µs) wire-PE
20 kA 
Discharge current In (8/20µs) wire-PE
10 kA 
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse protection
No Fuse neccessary ≤100 A gG 
Integrated back-up fuse
No 
Low voltage network
TN-S 
TT 
Max. continuous voltage, Uc (AC)
440 V 
Number of poles
1 
Protection level Up at IN (L/N-PE)
≤ 1.7 kV 
≤ 1.4 kV 
Rated voltage (AC)
230 V
Requirements category acc. to IEC 61643-11
Type II 
Type III 
Requirements class, acc. to EN 61643-11
T2 
T3 
Response time / fallback time
≤ 25 ns 
Short-circuit current rating ISCCR
25 kA
Signalling contact
No 
Standards
IEC 61643-11 
EN 61643-11 
Temporary surge voltage (over-voltage) - TOV
440 V
Voltage type
AC 
Protection level Up at IN (L-PE) (type III)
≤1 kV 

Dane przyłączeniowe

Conductor connection cross-section PE, solid, max.
35 mm²
Conductor connection cross-section PE, stranded, max.
35 mm²
Stripping length
13 mm
Wire connection method
Screw connection 
Type of connection
Screw connection 
Longueur de dénudage, raccordement nominal
15 mm
Wire cross-section, solid, min.
2,5 mm²
Wire cross-section, solid, max.
10 mm²
Wire connection cross section, finely stranded, min.
2,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Connection cross-section, stranded, min.
2,5 mm²
Connection cross-section, stranded, max.
10 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
1 
Protection degree
IP20 in installed state 
Colour
grey 

Guarantee

Time interval
5 years 

Important note

Produkthinweis
For use in DC applications, please use the fuse of SIBA Type NH2XL aR/aSF DC 1500 V 

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-12-02 
ECLASS 15.0
27-17-12-02