LM2NZF 5.08/10/135 3.5SN OR BX
Product image
Similar to illustration
LM2NZF 5.08/10/135 3.5SN OR BX
Dimensional drawing
LM2NZF 5.08/10/135 3.5SN OR BX
Graph

LM2NZF 5.08/10/135 3.5SN OR BX

Printed circuit board terminals, 5.08 mm, Number of poles: 10, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box

Product ID 1764840000
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Verwante producten 19
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Printed circuit board terminals, 5.08 mm, Number of poles: 10, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box 
Order No.
1764840000 
Type
LM2NZF 5.08/10/135 3.5SN OR BX 
GTIN (EAN)
4032248102976 
Qty.
50 items
Product data
IEC: 630 V / 15 A / 0.2 - 2.5 mm²
UL: 300 V / 10 A / AWG 24 - AWG 14 
Packaging
Box 

Dimensions and weights

Depth
24.05 mm
Profondità (pollici)
0.947 inch
Height
29.1 mm
Height (inches)
1,146 inch
Height of lowest version
25.6 mm
Width
26.1 mm
Width (inches)
1,028 inch
Net weight
14.32 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LMZF 
Wire connection method
Tension-clamp connection 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
135° 
Pitch in mm (P)
5.08 mm
Pitch in inches (P)
0.2 "
Number of poles
10 
핀 시리즈 수량
2 
Fitted by customer
No 
Number of rows
2 
Solder pin length (l)
3.5 mm
Solder pin dimensions
0.7 x 1.0 mm 
Solder eyelet hole diameter (D)
1.3 mm
솔더 구멍 직경 공차(D)
+ 0,1 mm 
폴당 용접 핀 수
1 
스크류드라이버 블레이드
0.6 x 3.5 
Screwdriver blade standard
DIN 5264-A 
Stripping length
7.5 mm
L1 in mm
20.32 mm
L1 in inches
0.8 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
2.10 mΩ 

Material data

Materiales aislantes
PA 
Colour
orange 
Carta de colores (similar)
RAL 2000 
Grupo de materiales aislantes
I 
Índice de resistencia al encaminamiento eléctrico (CTI)
≥ 600 
UL 94 가연성 등급
V-0 
Material de contacto
Cu-alloy 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Sección de embornado, mín.
0.13 mm²
Clamping range, max.
2.5 mm²
Sección de conexión del conductor AWG, min.
AWG 24 
Wire connection cross section AWG, max.
AWG 14 
Rígido, mín. H05(07) V-U
0.2 mm²
Rigide, max. H05(07) V-U
2.5 mm²
Flexible, mín. H05(07) V-K
0.2 mm²
Flexible, máx. H05(07) V-K
1.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0.25 mm²
con term. tub. con aislamiento DIN 46 228/4,máx
1.5 mm²
érvéghüvellyel, DIN 46228 1. pont, min.
0.25 mm²
con terminal tubular según DIN 46 228/1, máx.
1.5 mm²
EN 60999 a x b 규격, ø
2.4 mm x 1.5 mm 
클램프형 도체
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0372700000
참조 텍스트
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
15 A
Corriente nominal, número de polos máx. (Tu=20 °C)
12 A
Corriente nominal, número de polos mín. (Tu=40 °C)
13 A
Corriente nominal, número de polos máx. (Tu=40 °C)
10 A
Tensión nominal con categoría de sobretensión/grado de polución II/2
630 V
Tensión nominal con categoría de sobretensión/grado de polución III/2
320 V
Névleges feszültség a III/3 túlfeszültség osztályhoz / szennyezés mértékéhez
250 V
Tensión nominal con categoría de sobretensión/grado de polución II/2
4 kV
Névleges lökőfeszültség a III/2 túlfeszültség osztályhoz / szennyezés mértékéhez
4 kV
Sobretensión de choque nominal con categoría de sobretensión/grado de polución III/3
4 kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
10 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 14 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
정격 전압(사용 그룹 D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
10 A
정격 전류(사용 그룹 D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 14 

Packing

Packaging
Box 
VPE length
203 mm
VPE width
133 mm
VPE height
51 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01