BLDF 5.08/05/180DF SN OR BX
Product image
BLDF 5.08/05/180DF SN OR BX
Product image
BLDF 5.08/05/180DF SN OR BX

BLDF 5.08/05/180DF SN OR BX

Tämä tuote ei ole vielä saatavana .

PCB plug-in connector, female plug, 5.08 mm, Number of poles: 5, 180°, PUSH IN with push button, Clamping range, max. : 3.31 mm², Box

Tuotteen tunnus 3109700000
Lataa tietosivu Engineering Support
Samankaltaiset tuotteet 7
Approvals General ordering data Dimensions and weights Environmental Product Compliance System Parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Cross-connector rated data according to DIN IEC Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
PCB plug-in connector, female plug, 5.08 mm, Number of poles: 5, 180°, PUSH IN with push button, Clamping range, max. : 3.31 mm², Box 
Order No.
3109700000 
Type
BLDF 5.08/05/180DF SN OR BX 
GTIN (EAN)
4099987187725 
Qty.
24 Styk
Indices de produit
IEC: 400 V / 20.8 A / 0.2 - 2.5 mm²
UL: 300 V / 18.5 A / AWG 12 - AWG 26 
Csomagolás
Box 

Dimensions and weights

Depth
28,3 mm
Depth (inches)
1,114 inch
Height
24,7 mm
Height (inches)
0,972 inch
Width
54,6 mm
Width (inches)
2,15 inch
Net weight
16,385 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System Parameters

Product family
OMNIMATE Signal - series BL/SL 5.08 
Type of connection
Field connection 
Wire connection method
PUSH IN with push button 
Pitch in mm (P)
5,08 mm
Pitch in inches (P)
0,2 "
Conductor outlet direction
180° 
Number of poles
5 
L1 in mm
20,32 mm
L1 in inches
0,8 "
Number of rows
1 
Pin series quantity
1 
Rated cross-section
2,5 mm²
Beröringsskydd enligt DIN VDE 57
Safe from finger touch 
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Protection degree
IP20 
Volume resistance
≤5 mΩ 
Can be coded
Yes 
Avisoleringslängd
10 mm
Screwdriver blade
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Plugging cycles
25 
Plugging force/pole, max.
9,5 N
Pulling force/pole, max.
7,5 N

Material data

Matériau isolant
PBT 
Couleur
orange 
Colour chart (similar)
RAL 2000 
Insulating material group
IIIa 
Comparative Tracking Index (CTI)
≥ 200 
Класс пожаростойкости UL 94
V-0 
Contact material
Cu-alloy 
Contact surface
tinned 
Layer structure of plug contact
4...8 µm Sn hot-dip tinned 
Storage temperature, min.
−40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
−50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
−30 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Clamping range, min.
0,13 mm²
3,31 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 12 
Solid, min. H05(07) V-U
0,2 mm²
Solid, max. H05(07) V-U
2,5 mm²
Flexible, min. H05(07) V-K
0,2 mm²
Flexible, max. H05(07) V-K
2,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,25 mm²
mit AEH mit Kragen DIN 46 228/4, max.
2,5 mm²
con terminale, DIN 46228 pt 1, min.
0,25 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2,5 mm²
Нутрометр в соответствии с EN 60999 a x b; ø
2.8 mm x 2.0 mm 
Reference text
The outside diameter of the plastic collar should not be larger than the pitch (P) 
Length of ferrules is to be chosen depending on the product and the rated voltage. 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Courant nominal, nombre de pôles min. (Tu = 20 °C)
20,8 A
Rated current, max. number of poles (Tu=20°C)
17,4 A
Rated current, min. number of poles (Tu=40°C)
17,9 A
Rated current, max. number of poles (Tu=40°C)
14,9 A
Rated current cross-connector, min. number of poles (Ta=20°C)
28,1 A
정격 전류 점프바, 최대 폴 수(Ta=20°C)
23,3 A
Rated current cross-connector, min. number of poles (Ta=40°C)
24,2 A
Märkström överkoppling, max. antal poler (Ta=40°C)
19,9 A
Rated voltage for surge voltage class / pollution degree II/2
400 V
Rated voltage for surge voltage class / pollution degree III/2
320 V
Tensione nominale con classe di sovratensione/grado di lordura III/3
250 V
Bemessungsstoßspannung bei Überspannungsk./Verschmutzungsgrad II/2
4 kV
Tension de choc nominale pour classe de surtension/Degré de pollution III/2
4 kV
Bemessungsstoßspannung bei Überspannungsk./Verschmutzungsgrad III/3
4 kV
Krátkodobý odpor proti zkratovému proudu
3 x 1s with 120 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
18,5 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 12 
Wire cross-section, AWG, max.
AWG 26 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
18,5 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 12 
Wire cross-section, AWG, max.
AWG 26 

Packing

Packaging
Box 
VPE length
351 mm
VPE width
135 mm
VPE height
38 mm

Cross-connector rated data according to DIN IEC

Rated current cross-connector, max. number of poles (Ta=20°C)
23,3 A
Rated current cross-connector, max. number of poles (Ta=40°C)
19,9 A
Rated current cross-connector, min. number of poles (Ta=20°C)
28,1 A
Rated current cross-connector, min. number of poles (Ta=40°C)
24,2 A

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Crimping shape "A" for wire end ferrules with PZ 6/5 crimping tool recommended.
  • The test point can only be used as potential-pickup point.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002638 
ETIM 9.0
EC002638 
ETIM 10.0
EC002638 
ECLASS 14.0
27-46-02-02 
ECLASS 15.0
27-46-02-02