SLS 5.08/09/180DF SN OR BX
Product image
SLS 5.08/09/180DF SN OR BX
Product image
SLS 5.08/09/180DF SN OR BX
Dimensional drawing
SLS 5.08/09/180DF SN OR BX
Graph
SLS 5.08/09/180DF SN OR BX
Graph
SLS 5.08/09/180DF SN OR BX
Graph
SLS 5.08/09/180DF SN OR BX
Product benefits
Lower assembly costs
Secure in a matter of seconds
SLS 5.08/09/180DF SN OR BX
Product benefits
Flexible application options
For 3 connection systems

SLS 5.08/09/180DF SN OR BX

PCB plug-in connector, male plug, 5.08 mm, Number of poles: 9, 180°, Clamping yoke connection, Clamping range, max. : 3.31 mm², Box

Tuotteen tunnus 1353550000
Lataa tietosivu Engineering Support Product Downloads
On vastine kohteelle 3 Samankaltaiset tuotteet 10
Approvals General ordering data Dimensions and weights Environmental Product Compliance System Parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319262/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[Web UL](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Сертификат № (UR)
E60693 

General ordering data

Version
PCB plug-in connector, male plug, 5.08 mm, Number of poles: 9, 180°, Clamping yoke connection, Clamping range, max. : 3.31 mm², Box 
Order No.
1353550000 
Type
SLS 5.08/09/180DF SN OR BX 
GTIN (EAN)
4050118156065 
Кол.
24 Styk
Product data
IEC: 400 V / 21.5 A / 0.2 - 2.5 mm²
UL: 300 V / 14 A / AWG 26 - AWG 12 
Packaging
Box 

Dimensions and weights

Depth
22,2 mm
Depth (inches)
0,874 inch
Height
15,3 mm
Height (inches)
0,602 inch
Width
75,02 mm
Width (inches)
2,954 inch
Masa netto
15,583 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System Parameters

Product family
OMNIMATE Signal - series BL/SL 5.08 
Type of connection
Field connection 
Wire connection method
Clamping yoke connection 
Pitch in mm (P)
5,08 mm
Pitch in inches (P)
0,2 "
Conductor outlet direction
180° 
Number of poles
9 
L1 in mm
40,64 mm
L1 in inches
1,6 "
Počet řad
1 
Pin series quantity
1 
Touch-safe protection acc. to DIN VDE 57 106
finger-safe plugged/ back-of-hand-safe unplugged 
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Protection degree
IP20 
when fully mounted 
Volume resistance
4.50 mΩ 
Can be coded
Yes 
Stripping length
7 mm
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,5 Nm
Clamping screw
M 2.5 
Screwdriver blade
0.6 x 3.5 
Screwdriver blade standard
DIN 5264-A 
Plugging cycles
25 
Plugging force/pole, max.
4 N
Pulling force/pole, max.
3 N
Tightening torque
  • Torque type:
    Wire connection
  • Usage information:
    • Tightening torque:
      • min.:
        0,4 Nm
      • max.:
        0,5 Nm

Material data

Изоляционный материал
PBT 
Colour
orange 
Таблица цветов (аналогич.)
RAL 2000 
Isoleringsmaterialgrupp
IIIa 
Сравнительный показатель пробоя (CTI)
≥ 200 
UL 94 flammability rating
V-0 
Материал контакта
Cu-alloy 
Поверхность контакта
tinned 
Структура слоев штепсельного контакта
4...8 µm Sn hot-dip tinned 
Storage temperature, min.
−40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
−50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
−25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Диапазон зажима, мин.
0,13 mm²
3,31 mm²
Wire connection cross section AWG, min.
AWG 26 
Vezeték csatlakozási keresztmetszet AWG, max.
AWG 12 
Одножильный, мин. H05(07) V-U
0,2 mm²
Solid, max. H05(07) V-U
2,5 mm²
Stranded, min. H07V-R
0,2 mm²
Stranded, max. H07V-R
2,5 mm²
Гибкий, мин. H05(07) V-K
0,2 mm²
Гибкий, макс. H05(07) V-K
2,5 mm²
С наконечником DIN 46 228/4, мин.
0,2 mm²
С наконечником DIN 46 228/4, макс.
2,5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,2 mm²
С кабельным наконечником согласно DIN 46 228/1, макс.
2,5 mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.8 mm x 2.0 mm; 2.4 mm 
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0372700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        7 mm
    • Recommended wire-end ferrule:
      0373000000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
Текст ссылки
The outside diameter of the plastic collar should not be larger than the pitch (P) 
Length of ferrules is to be chosen depending on the product and the rated voltage. 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
21,5 A
Rated current, max. number of poles (Tu=20°C)
16 A
Номинальный ток, мин. кол-во контактов (Tu = 40 °C)
18 A
Номинальный ток, макс. кол-во контактов (Tu = 40 °C)
14 A
Номинальное импульсное напряжение при категории помехозащищенности/Категория загрязнения II/2
400 V
Номинальное импульсное напряжение при категории помехозащищенности/Категория загрязнения III/2
320 V
Rated voltage for surge voltage class / pollution degree III/3
250 V
Номинальное импульсное напряжение при категории помехозащищенности/Категория загрязнения II/2
4 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4 kV
Номинальное импульсное напряжение при категории помехозащищенности/Категория загрязнения III/3
4 kV
Устойчивость к воздействию кратковременного тока
3 x 1s with 120 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
15 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 26 
Wire cross-section, AWG, max.
AWG 12 

Rated data acc. to UL 1059

Institute (UR)
UR 
Certificate No. (UR)
E60693 
Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
14 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 26 
Wire cross-section, AWG, max.
AWG 12 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packing

Packaging
Box 
VPE length
349 mm
VPE width
135 mm
VPE height
30 mm

Type tests

Test: Durability of markings
  • Standard:
    VDE 0627 Tab. 7 item 3/6.86
  • Test:
    durability
  • Evaluation:
    passed
Test: Clampable cross section
  • Standard:
    VDE 0609, část 1 06.83, EN 60947-1 03.91
  • Typ vodiče:
    • Typ vodiče a průřez vodiče:
      H05V-U0,5
    • Typ vodiče a průřez vodiče:
      H05V-K0,5
    • Typ vodiče a průřez vodiče:
      H05V-U2,5
    • Typ vodiče a průřez vodiče:
      H05V-K2,5
    • Typ vodiče a průřez vodiče:
      AWG 28
    • Typ vodiče a průřez vodiče:
      AWG 14
  • Vyhodnocení:
    vyhovělo
Test for damage to and accidental loosening of conductors
  • Standard:
    EN 60947-1/1991 section 8.2.4.3
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
  • Evaluation:
    passed
Pull-out test
  • Standard:
    EN 60947-1/1991 section 8.2.4.4
  • Requirement:
    ≥5 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 28/1
    • Type of conductor and conductor cross-section:
      AWG 28/7
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      AWG 14/19
  • Evaluation:
    passed

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002638 
ETIM 9.0
EC002638 
ETIM 10.0
EC002638 
ECLASS 14.0
27-46-02-02 
ECLASS 15.0
27-46-02-02