Properties
| Version | FieldPower® power supply unit, IP65, in closed state, in complete state, 10A, 24 V, DC, PUSH IN |
| Order No. | 2887580000 |
| Type | FP PRO TOP3 24/10 2M |
| GTIN (EAN) | 4064675859833 |
| Qty. | 1 items |
| Depth | 196 mm |
| Depth (inches) | 7.717 inch |
| Height | 196 mm |
| Height (inches) | 7.717 inch |
| Width | 220 mm |
| Width (inches) | 8.661 inch |
| Net weight | 3,605 g |
| Storage temperature | -40 °C...85 °C |
| Operating temperature | -25 °C...50 °C |
| Operating temperature range | -25 °C ... +50 °C (regard derating) Start up ≥ -40 °C |
| Humidity | 35…85%, non condensing and non freezing |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 6c |
| REACH SVHC |
Lead 7439-92-1
Potassium perfluorobutane sulfonate 29420-49-3 |
| SCIP | 7645f3b1-6db9-495d-9e21-ab1d894aff05 |
| AC current consumption | 0,7 A @ 400 V DC / 0,8 A @ 320 V AC |
| AC input voltage range | 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC |
| Connection system | IDC terminal |
| DC input voltage range | 450...800 V DC (max. 500 V DC acc. to UL508) |
| Frequency range AC | 45…65 Hz |
| Input fuse (internal) | No |
| Inrush current | Max. 10 A |
| Recommended back-up fuse | 2 - 3 A, Char. C |
| Surge protection | Varistor |
| Wire connection method | PUSH IN |
| Adjustable rated current | No |
| Nominal output current for Unom | 10 A @ 60 °C |
| Output current | 10A |
| Output power | 240 W |
| Output voltage | 24 V |
| Output voltage type | DC |
| Output voltage, max. | 28.8 V |
| Output voltage, min. | 22.5 V |
| Output voltage, note | (adjustable via potentiometer) |
| Rated output voltage | 24 V DC ± 1 % |
| Surge protection | Varistor |
| Switch-on delay | 1 s |
| Triggering characteristic | see characteristic curve |
| Wire connection method | PUSH IN |
| Humidity | 35…85%, non condensing and non freezing |
| Installation advice | Lid screws included |
| Protection degree |
IP65
in closed state in complete state |
| Short-circuit protection |
Yes
internal |
| Surge voltage category |
II
III |
| Surge voltage category |
II
III |
| Connection system | IDC terminal |
| AC current consumption | 0,7 A @ 400 V DC / 0,8 A @ 320 V AC |
| AC input voltage range | 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC |
| DC input voltage range | 450...800 V DC (max. 500 V DC acc. to UL508) |
| Frequency range AC | 45…65 Hz |
| Recommended back-up fuse | 2 - 3 A, Char. C |
| Surge protection | Varistor |
| Inrush current | Max. 10 A |
| Input fuse (internal) | No |
| Adjustable rated current | No |
| Output current | 10A |
| Output power | 240 W |
| Output voltage | 24 V |
| Output voltage type | DC |
| Output voltage, max. | 28.8 V |
| Output voltage, min. | 22.5 V |
| Output voltage, note | (adjustable via potentiometer) |
| Switch-on delay | 1 s |
| Triggering characteristic | see characteristic curve |
| Rated output voltage | 24 V DC ± 1 % |
| Nominal output current for Unom | 10 A @ 60 °C |
| Approval/Certificate/Document of Conformity | [Manufacturer's Declaration FieldPower® PROtop](https://mdcop.weidmueller.com/mediadelivery/asset/900_263979) |
| User Documentation | [Manual FieldPower® PROtop](https://mdcop.weidmueller.com/mediadelivery/asset/900_225321) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC002540 |
| ETIM 7.0 | EC002540 |
| ETIM 8.0 | EC002540 |
| ETIM 9.0 | EC002540 |
| ECLASS 9.1 | 27-04-07-01 |
| ECLASS 10.0 | 27-04-07-01 |
| ECLASS 11.0 | 27-04-07-01 |
| ECLASS 12.0 | 27-04-07-01 |
| ECLASS 13.0 | 27-04-90-02 |
| ECLASS 14.0 | 27-04-07-01 |
| ROHS | Conform |