FSKIT 24VDC 5NO1NC FG LD AGSNO AU
Product image
Similar to illustration
FSKIT 24VDC 5NO1NC FG LD AGSNO AU
Wiring diagram
FSKIT 24VDC 5NO1NC FG LD AGSNO AU
Graph
FSKIT 24VDC 5NO1NC FG LD AGSNO AU
Graph
FSKIT 24VDC 5NO1NC FG LD AGSNO AU
Dimensional drawing
FSKIT 24VDC 5NO1NC FG LD AGSNO AU
Dimensional drawing
FSKIT 24VDC 5NO1NC FG LD AGSNO AU
Type codes

FSKIT 24VDC 5NO1NC FG LD AGSNO AU

SAFESERIES, Relay module with positively driven contacts 1 NC and 5 NO contacts forcibily guided (EN 61810-3 type A) AgSnO gold-plated, Rated control voltage: 24 V DC ±10 %, Continuous current: 6 A, Screw connection, Test button available: No

Tuotteen tunnus 2860020000
Lataa tietosivu Engineering Support Software Support Product Downloads
Lisävarusteet 7 Yksittäiset osat 1 Samankaltaiset tuotteet 5
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Rated data UL Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications Approvals

General ordering data

Version
SAFESERIES, Relay module with positively driven contacts 1 NC and 5 NO contacts forcibily guided (EN 61810-3 type A) AgSnO gold-plated, Rated control voltage: 24 V DC ±10 %, Continuous current: 6 A, Screw connection, Test button available: No  
Order No.
2860020000  
Type
FSKIT 24VDC 5NO1NC FG LD AGSNO AU  
GTIN (EAN)
4064675574729  
Qty.
1  items

Dimensions and weights

Depth
59,8  mm
Depth (inches)
2,354  inch
Height
89,4  mm
Height (inches)
3,52  inch
Width
29,8  mm
Width (inches)
1,173  inch
Net weight
63,3  g

Temperatures

Storage temperature
-40 °C...70 °C  
Ambient temperature
-25 °C…55 °C  
Operating temperature
-40 °C...70 °C  
Humidity
5...85 % rel. humidity, no condensation  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
6c, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
19f8b897-8687-40cb-b680-a1c1db5fdebc  

Rated data UL

Ambient temperature (operational), max.
70  °C
Connection cross-section AWG, min.
AWG 20  
Connection cross-section AWG, max.
AWG 16  
Type of conductor
rigid copper conductor  
flexible copper conductor  
Tightening torque, max.
1  Nm

Control side

Rated control voltage
24 V DC ±10 %  
Rated current DC
25.5 mA  
Power rating
620 mW  
Status indicator
Green LED  
Protective circuit
Free-wheeling diode  

Load side

Rated switching voltage
250 V AC  
Continuous current
6 A  
Max. switching frequency at rated load
0,1  Hz
Max. switching voltage, AC
400  V
Max. switching voltage, DC
250  V
Min. switching power
2 mA @ 24 V  
10 mA @ 12 V  
100 mA @ 5 V  
Inrush current
30 A / 20 ms  
AC switching capacity (resistive), max.
1500 VA  
DC switching capacity (resistive), max.
144 W @ 24 V  
Switch-on delay
≤ 20 ms  
Switch-off delay
≤ 20 ms  
Contact type
1 NC and 5 NO contacts forcibily guided (EN 61810-3 type A) (AgSnO gold-plated)  
Mechanical service life
10 x 106 switching cycles  

General data

Operating altitude
≤ 2000 m  
above sea level  
Rail
TS 35  
Test button available
No  
Mechanical switch position indicator
No  
Colour
Anthracite  
UL 94 flammability rating
V-2  
UL94 flammability rating component
  • Component:
    Socket
  • UL94 flammability rating:
    V-2
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0

Insulation coordination

Insulation coordination according to
IEC 61984  
Rated voltage
250  V
Pollution severity
2  
Surge voltage category
III  
Clearance and creepage distances for control side - load side
≥ 3 mm  
Dielectric strength for control side - load side
2.5 kVeff/ 1 min  
Type of isolation at input and output
Basic insulation  
Dielectric strength of neighbouring contacts
2.5 kVeff / 1 Min.  
Type of isolation at neighbouring contacts
Basic insulation  
Dielectric strength of open contact
1.5 kVeff /1 min.  
Dielectric strength to mounting rail
4 kVeff / 1 Min.  
Impulse withstand voltage at input and output
2.5 kV  
Impulse withstand voltage at neighbouring contacts
2.5 kV  
Protection degree
IP10  

Further details of approvals / standards

Certificate no. (cULus)
E223474  

Connection data

Wire connection method
Screw connection  
Stripping length, rated connection
7  mm
Tightening torque, min.
0,4  Nm
Tightening torque, max.
1  Nm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,5  mm²
Clamping range, max.
1,5  mm²
Wire connection cross section AWG, min.
AWG 20  
Wire connection cross section AWG, max.
AWG 14  
Wire cross-section, solid, min.
0,5  mm²
Wire cross-section, solid, max.
1,5  mm²
Wire cross-section, solid, min. (AWG)
AWG 20  
Wire cross-section, solid, max. (AWG)
AWG 14  
Wire connection cross section, finely stranded, min.
0,5  mm²
Wire connection cross section, finely stranded, max.
1,5  mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 20  
Wire cross-section, finely stranded, max. (AWG)
AWG 14  
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
0,75  mm²

Classifications

ETIM 6.0
EC001437  
ETIM 7.0
EC001437  
ETIM 8.0
EC001437  
ETIM 9.0
EC001437  
ETIM 10.0
EC001437  
ECLASS 9.0
27-37-16-01  
ECLASS 9.1
27-37-16-01  
ECLASS 10.0
27-37-16-01  
ECLASS 11.0
27-37-16-01  
ECLASS 12.0
27-37-16-01  
ECLASS 13.0
27-37-16-01  
ECLASS 14.0
27-37-16-01  
ECLASS 15.0
27-37-16-01  

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate no. (cULus)
E223474