LP 7.62/02/90 3.2SN OR BX
Product image
Similar to illustration
LP 7.62/02/90 3.2SN OR BX
Dimensional drawing
LP 7.62/02/90 3.2SN OR BX
Graph

LP 7.62/02/90 3.2SN OR BX

Printed circuit board terminals, 7.62 mm, Number of poles: 2, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box

Produkt ID 1594460000
Download datablad Engineering Support Product Downloads
Tilbehør 5 Anvendte produkter 6
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319226/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319262/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate No. (UR)
E60693 

General ordering data

Version
Printed circuit board terminals, 7.62 mm, Number of poles: 2, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box 
Order No.
1594460000 
Type
LP 7.62/02/90 3.2SN OR BX 
GTIN (EAN)
4008190093679 
Qty.
100 Styk
Product data
IEC: 1000 V / 32 A / 0.5 - 6 mm²
UL: 300 V / 20 A / AWG 26 - AWG 12 
Packaging
Box 

Dimensions and weights

Depth
11 mm
Depth (inches)
0,433 inch
Height
20,2 mm
Height (inches)
0,795 inch
Height of lowest version
17 mm
Width
15,84 mm
Width (inches)
0,624 inch
Net weight
3,333 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LP 
Wire connection method
Clamping yoke connection 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
90° 
Pitch in mm (P)
7,62 mm
Pitch in inches (P)
0,3 "
Number of poles
2 
Pin series quantity
1 
Fitted by customer
Yes 
Number of rows
1 
Max. adjacent poles per row
16 
Solder pin length (l)
3,2 mm
Solder pin dimensions
0.75 x 0.9 mm 
Solder eyelet hole diameter (D)
1,3 mm
Tolerancja średnicy otworu oczka lutowniczego (D)
+ 0,1 mm 
liczba kołków lutowanych na biegun
1 
końcówka wkrętaka
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
0,5 Nm
Tightening torque, max.
0,6 Nm
Clamping screw
M 3 
Stripping length
6 mm
L1 in mm
7,62 mm
L1 in inches
0,3 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
1.20 mΩ 

Material data

Insulating material
PA 
Colour
orange 
Colour chart (similar)
RAL 2000 
Szigetelőanyag csoport
I 
Comparative Tracking Index (CTI)
≥ 600 
UL 94 flammability rating
V-2 
Contact material
Cu-alloy 
Contact surface
tinned 
powlekanie
1-3 μm Ni 
4-6 μm SN 
납땜 유형
matt 
Struktura vrstev pájeného připojení
4...6 µm Ni / 4...6 µm Sn 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Clamping range, min.
0,13 mm²
6 mm²
Sezione di collegamento cavo AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 12 
Rigide, min. H05(07) V-U
0,5 mm²
jednodrutowe, maks. H05(07) V-U
6 mm²
Stranded, max. H07V-R
6 mm²
Flexible, mín. H05(07) V-K
0,5 mm²
Flexible, máx. H05(07) V-K
4 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
2,5 mm²
z tulejką zaciskową, DIN 46228 pt 1, min.
0,5 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2,5 mm²
EN 60999 a x b 규격, ø
2.8 mm x 2.4 mm; 3.0 mm 
Upínatelný vodič
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409500000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409700000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
Tekst referencyjny
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
정격 전류, 극 수(Tu=20°C)
32 A
정격 전류, 최대 극 수(Tu=20°C)
32 A
Rated current, min. number of poles (Tu=40°C)
32 A
Courant nominal, nombre de pôles max. (Tu = 40 °C)
30,5 A
Tensión nominal con categoría de sobretensión/grado de polución II/2
1.000 V
Tensión nominal con categoría de sobretensión/grado de polución III/2
500 V
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia III/3
500 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
6 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
6 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
6 kV
Short-time withstand current resistance
3 x 1s with 120 A 

Rated data acc. to CSA

Institute (CSA)
CSA 
Certificate No. (CSA)
200039-1202191 
Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
20 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 26 
Wire cross-section, AWG, max.
AWG 12 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Institute (UR)
UR 
Certificate No. (UR)
E60693 
Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
20 A
Märkström (användargrupp D / UL 1059)
10 A
Поперечное сечение подключаемого провода AWG, мин.
AWG 26 
Wire cross-section, AWG, max.
AWG 12 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packing

Packaging
Box 
VPE length
117 mm
VPE width
103 mm
VPE height
65 mm

Type tests

Test: Durability of markings
  • Standard:
    draft DIN VDE 0627 section 6.2.2 / 09.91
  • Test:
    mark of origin, type identification, rated voltage, rated cross-section, pitch, approval marking SEV, durability
  • Evaluation:
    available
Test: Clampable cross section
  • Standard:
    DIN EN 60999 section 6 and 8.1 / 04.94, DIN EN 60947-1 section 8.2.4.5.1 / 07.98
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0,12 mm²
    • Type of conductor and conductor cross-section:
      flexible 0,12 mm²
    • Type of conductor and conductor cross-section:
      flexible 4 mm²
    • Type of conductor and conductor cross-section:
      solid 6 mm²
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
    • Type of conductor and conductor cross-section:
      AWG 12/1
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed
Test for damage to and accidental loosening of conductors
  • Standard:
    DIN EN 60999 section 8.4 / 04.94
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.9 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 4 mm²
    • Type of conductor and conductor cross-section:
      AWG 12/1
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed
  • Requirement:
    1.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 6 mm²
  • Evaluation:
    passed
Pull-out test
  • Standard:
    DIN EN 60999 section 8.5 / 04.94
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
  • Evaluation:
    passed
  • Requirement:
    ≥30 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    ≥60 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K4
    • Type of conductor and conductor cross-section:
      AWG 12/1
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed
  • Requirement:
    ≥80 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U6
  • Evaluation:
    passed

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • It is necessary to hold the insulating body of the one or two pole terminal when tightening the screw
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01