Skip to content Skip to navigation menu

PRO ECO3 480W 24V 20A

PRO ECO3 480W 24V 20A — Electric symbol

PRO ECO3 480W 24V 20A — Derating curve

PRO ECO3 480W 24V 20A — Derating curve

PRO ECO3 480W 24V 20A — Derating curve

Download data sheet

PRO ECO3 480W 24V 20A

Power supply, switch-mode power supply unit, 24 V

Item No. 1469550000

Properties

General ordering data

Version	Power supply, switch-mode power supply unit, 24 V
Order No.	1469550000
Type	PRO ECO3 480W 24V 20A
GTIN (EAN)	4050118275742
Qty.	1 items

Dimensions and weights

Depth	120 mm
Depth (inches)	4.724 inch
Height	125 mm
Height (inches)	4.921 inch
Width	100 mm
Width (inches)	3.937 inch
Net weight	1,300 g

Storage temperature	-40 °C...85 °C
Operating temperature	-25 °C...70 °C

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1
SCIP	6d8cdf22-8230-4af8-86c8-3558c716666d

Certificate No. (cURus)

E255651

AC input voltage range	3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC
Connection system	Screw connection
Current consumption in relation to the input voltage	Voltage type: 3-phase AC Input voltage: 400 V Input current: 1.5 A Voltage type: 3-phase AC Input voltage: 500 V Input current: 1.2 A Voltage type: DC Input voltage: 800 V Input current: 0.7 A Voltage type: DC Input voltage: 450 V Input current: 1.2 A
DC input voltage range	450...800 V DC
Frequency range AC	47...63 Hz
Input frequency	47...63 Hz
Input fuse (internal)	Yes
Inrush current	max. 50 A
Nominal power consumption	539.3 VA
Rated input voltage	3x 400...3x 500 V AC (wide-range input)
Recommended back-up fuse	4 A / DI, safety fuse 3...5 A, Char. C, circuit breaker
Surge protection	Varistor

Capacitive load	unrestricted
Connection system	Screw connection
Continous output current @ U_Nominal	20 A @ 55 °C 15 A @ 70 °C
Nominal output current for U_nom	20 A @ 55 °C
Output power	480 W
Output voltage, max.	28 V
Output voltage, min.	22 V
Output voltage, note	(adjustable via potentiometer)
Overload protection	Yes
Parallel connection option	yes, max. 3
Protection against inverse voltage	Yes
Ramp-up time	≤ 100 ms
Rated output voltage	24 V DC ± 1 %
Residual ripple, breaking spikes	< 50 mV_PP @ 24 V DC, I_N

AC failure bridging time @ I_nom	> 30 ms @ 3 x 500 V AC / > 20 ms @ 3 x 400 V AC
Degree of efficiency	89%
Earth leakage current, max.	3.5 mA
Housing version	Metal, corrosion resistant
Indication	Green LED (U_output > 21.6 V DC) Yellow LED (l_output > 90 % I_Rated typ. ) red LED (overload, overtemperature, short-circuit, U_output < 20.4 V DC)
Max. perm. air humidity (operational)	5 %…95 % RH
Mounting position, installation notice	on terminal rail TS 35
MTBF	According to Standard: SN 29500 Operating time (hours), min.: 1,300,000 h Ambient temperature: 25 °C Input voltage: 400 V Output power: 480 W Duty cycle: 100 % According to Standard: SN 29500 Operating time (hours), min.: 620,000 h Ambient temperature: 40 °C Input voltage: 400 V Output power: 480 W Duty cycle: 100 %
Power factor (approx.)	> 0.55 @ 3 x 500 V AC / > 0.65 @ 3 x 400 V AC
Power loss, idling	8 W
Power loss, nominal load	48 W
Protection against over-heating	Yes
Protection against reverse voltages from the load	30…35 V DC
Protection degree	IP20
Short-circuit protection	Yes
Surge voltage category	II

EMC / shock / vibration

Interference immunity test acc. to	EN 61000-4-2 (ESD) EN 61000-4-3 (RS) EN 61000-4-4 (burst) EN 61000-4-5 (surge) EN 61000-4-6 (conducted) EN61000-4-8 (Fields) EN61000-4-11 (Dips)
Limiting of mains voltage harmonic currents	According to EN 61000-3-2
Noise emission in accordance with EN55032	Class B
Shock resistance IEC 60068-2-27	15 g In all directions
Vibration resistance IEC 60068-2-6	1 g according to EN 50178

Insulation coordination

Insulation voltage input / earth	2 kV
Insulation voltage output / earth	0.5 kV
Insulation voltage, input/output	3 kV
Pollution severity	2
Protection class	I, with PE connection
Surge voltage category	II

Electrical safety (applied standards)

Electrical machine equipment	Acc. to EN60204
For use with electronic equipment	Acc. to EN50178 / VDE0160
Protection against dangerous shock currents	Acc. to VDE0106-101
Protective separation / protection against electrical shock	VDE0100-410 / acc. to DIN57100-410
Safety extra-low voltage	SELV acc. to IEC 60950-1 PELV according to EN 60204-1
Safety transformers for switch-mode power supplies	According to EN 61558-2-16

Connection data (input)

Conductor cross-section, AWG/kcmil , max.	12
Conductor cross-section, AWG/kcmil , min.	26
Conductor cross-section, flexible , min.	0.5 mm²
Conductor cross-section, rigid , max.	6 mm²
Conductor cross-section, rigid , min.	0.5 mm²
Connection system	Screw connection
Number of terminals	4 for L1/L2/L3/PE
Tightening torque, max.	0.6 Nm
Tightening torque, min.	0.5 Nm
Wire connection cross section, flexible (input), max.	2.5 mm²

Connection data (output)

Conductor cross-section, AWG/kcmil , max.	10
Conductor cross-section, AWG/kcmil , min.	26
Conductor cross-section, flexible , max.	2.5 mm²
Conductor cross-section, flexible , min.	0.5 mm²
Conductor cross-section, rigid , max.	6 mm²
Conductor cross-section, rigid , min.	0.5 mm²
Connection system	Screw connection
Number of terminals	7 (++,---,13,14)
Tightening torque, max.	0.6 Nm
Tightening torque, min.	0.5 Nm

Contact load (NO contact)	max. 30 V DC / 1 A
Floating contact	Yes
Relay on/off	Output voltage >21.6 V DC/ <20.4 V DC, overload

Certificate no. (cULus)	E258476
Certificate No. (cURus)	E255651
Institute (cULus)	CULUS
Institute (cURus)	CURUS

Approval/Certificate/Document of Conformity	[UL508 CSA C22.2 Certificate.pdf](https://mdcop.weidmueller.com/mediadelivery/asset/900_306084) [Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_35495) [UK Conformity Assessed](https://mdcop.weidmueller.com/mediadelivery/asset/900_314089)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_89462)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.1469550000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1469550000)
WSCAD Universe	[WSCAD data](https://wscaduniverse.com/part-detail?manufacturerId=88&type=0&partNumber=1469550000&norm=0)
User Documentation	[Operating instructions](https://mdcop.weidmueller.com/mediadelivery/asset/900_68810)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC002540
ETIM 7.0	EC002540
ETIM 8.0	EC002540
ETIM 9.0	EC002540
ECLASS 9.0	27-04-07-01
ECLASS 9.1	27-04-07-01
ECLASS 10.0	27-04-07-01
ECLASS 11.0	27-04-07-01
ECLASS 12.0	27-04-07-01
ECLASS 13.0	27-04-90-02

Approvals	![CE](/picture/CE.gif) ![CULUS](/picture/CULUS.gif) ![CURUS](/picture/CURUS.gif) ![TUEV](/picture/TUEV.gif) ![UKCA](/picture/UKCA.gif)
ROHS	Conform
UL File Number Search	[UL Website](LINK/UL_search.html)
Certificate No. (cURus)	E255651
Certificate no. (cULus)	E258476

Accessories

ToolsScrewdriversVDE-insulated SlimLine screwdriverSlotted screwdriver

SDIS SLIM 0.6X3.5X100

SDIS SLIM 0.6X3.5X100

Item No.:

2749610000

Packaging unit:

1 PC

Mounting tool, Blade width (B): 3.5 mm, Blade length: 100 mm, Blade thickness (A): 0.6 mm

Data sheet Downloads

Terminal BlocksAccessoriesEnd bracketsTS 35W-Series

WEW 35/2 V0 GF SW

WEW 35/2 V0 GF SW

Item No.:

1479000000

Packaging unit:

50 PC

End bracket, Wemid, black, Rail: TS 35, when screwed in

Data sheet Downloads

WEW 35/1 SW

WEW 35/1 SW

Item No.:

1162600000

Packaging unit:

50 PC

End bracket, Wemid, black, Rail: TS 35, when screwed in

Data sheet Downloads

WEW 35/1 V0 GF SW

WEW 35/1 V0 GF SW

Item No.:

1478990000

Packaging unit:

50 PC

End bracket, Wemid, black, Rail: TS 35, when screwed in

Data sheet Downloads

ToolsScrewdriversVDE-insulated SlimLine screwdriverCrosshead screwdriver, Pozidrive

SDIK SLIM PZ1 X 80

SDIK SLIM PZ1 X 80

Item No.:

2749670000

Packaging unit:

1 PC

Screwdriver, Blade width (B): 1 mm, 80 mm, Blade thickness (A): 1

Data sheet Downloads