Skip to content Skip to navigation menu

Download data sheet

WAZ1 CMA LP 1/5/10A AC

Current monitoring, Input current: 0...1 A AC/ 0...5 A AC/ 0...10 A AC, Output : 4-20 mA, (loop powered)

Item No. 8528660000

Properties

General ordering data

Version	Current monitoring, Input current: 0...1 A AC/ 0...5 A AC/ 0...10 A AC, Output : 4-20 mA, (loop powered)
Order No.	8528660000
Type	WAZ1 CMA LP 1/5/10A AC
GTIN (EAN)	4032248160433
Qty.	1 items
Delivery status	This article will no longer be available in the future.
Available until	30.12.2023
Alternative product	[2489910000](~/p/2489910000)

Dimensions and weights

Depth	112.4 mm
Depth (inches)	4.425 inch
Width	22.5 mm
Width (inches)	0.886 inch
Length	72 mm
Length (inches)	2.835 inch
Net weight	72.9 g

Temperatures

Storage temperature	-20 °C...70 °C
Operating temperature	0 °C...70 °C
Humidity at operating temperature	0...95 % (no condensation)

Probability of failure

SIL in compliance with IEC 61508	None
MTTF	564 a

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1 6,6'-di-tert-butyl-2,2'-methylenedi-p-cresol 119-47-1
SCIP	f8333314-0c66-4444-aa47-78252861a7fb

Input

Input current	0...1 A AC/ 0...5 A AC/ 0...10 A AC
Input frequency	50...60Hz
Number of inputs	1

Output

Load impedance current	≤ 600 Ω
Number of outputs	1
Offset current	max. 100 µA
Output current	4...20 mA (current loop)
Output signal limit	Approx. 24 mA

Output (digital)

Max. switching voltage, AC	0 V
Rated switching current	0.1 A
Status indicator	LED ON: OK; LED flashing: signal out of range; LED OFF: Error

Output (analogue)

Output current

4...20 mA (current loop)

General data

Accuracy	0.5 % FSR
Configuration	DIP switch
Galvanic isolation	2-way isolator
Rail	TS 35
Step response time	typ. 700 ms
Temperature coefficient	≤ 200 ppm/K
Voltage supply	13...30 V DC via output current loop

Insulation coordination

EMC standards	EN 55011 EN 61000-6
Galvanic isolation	2-way isolator
Impulse withstand voltage	6 kV
Insulation voltage	4 kV_eff / 5 s
Pollution severity	2
Rated voltage	300 V
Surge voltage category	III

Connection data

Type of connection	Tension-clamp connection
Clamping range, rated connection	1.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	2.5 mm²

Important note

Product information

This product will soon be replaced by a new product.
Please do not use with new systems. Please contact our technical support.

Downloads

Approval/Certificate/Document of Conformity	[Application notes -- Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_35479)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_206141)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=8528660000)
Product Change Notification	[20220218 Technical change - WAVE series’ signal conditioners WS WZ](https://mdcop.weidmueller.com/mediadelivery/asset/900_252007)
User Documentation	[Device description -- Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_35433)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC002653
ETIM 7.0	EC002653
ETIM 8.0	EC002653
ETIM 9.0	EC002653
ECLASS 9.0	27-21-01-20
ECLASS 9.1	27-21-01-20
ECLASS 10.0	27-21-01-20
ECLASS 11.0	27-21-01-20
ECLASS 12.0	27-21-01-20
ECLASS 13.0	27-21-01-20

Tender specification sheets

Long specification

Monitoring component for AC currents up to 10A with 4...20 mA loop feed
and electrical isolation
Current monitoring component in 22.5 mm width for recording 50/ 60 Hz AC currents
0...1 A / 0...5 A / 0...10 A. Input range can be selected using DIP switches.
Power is fed to the component via the 4...20 mA current loop on the output side.
The input and output circuits have 6 kV of electrical isolation.

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 72/ 22.5/ 92.4 mm
Tension-clamp connection / Nominal cross-section 1.5 mm²Protection degree: IP 20

Input                        0...1 A / 0...5 A / 0...10 A AC switchable
                                      50 / 60 Hz
Voltage of measuring circuit 250 V AC
Output                                             4...20 mA current loop
Load resistance            < 600 Ohm Strom
>1 kOhm / voltage
Transmission error           < 0,5% v. E.
Temperature coefficient 200 ppm / K
Step response time typ. 700 ms
Auxiliary power                                     via output-side current loop
Ambient
temperature range 0 °C...+50 °C

Secure isolation                   EN 50178, 2-way isolation up to 6 kV
Test voltage                               4 kV input against output
Rated
voltage                                          300 V AC/DC at overvoltage category III and pollution degree 2
Approvals cULus

Type WAZ1 CMA LP 1/5/10A ac

Short specification

Monitoring component for AC currents up to 10A with 4...20 mA loop feed and electrical isolation
Current monitoring component in 22.5 mm width for recording 50/ 60 Hz AC currents
0...1 A / 0...5 A / 0...10 A. Input range can be selected using DIP switches.
Power is fed to the component via the 4...20 mA current loop on the output side.
The input and output circuits have 6 kV of electrical isolation.

Approvals

Approvals	![CE](/picture/CE.gif) ![CULUS](/picture/CULUS.gif)
ROHS	Conform
UL File Number Search	[UL Website](LINK/UL_search.html)
Certificate no. (cULus)	E141197