MCZ VFC 0-10V

DC/f transformer, Input : 0-10 V, Output frequency: 0...1/ 4/ 8/ 16 kHz

Item No. 8461470000

Properties

General ordering data

Version	DC/f transformer, Input : 0-10 V, Output frequency: 0...1/ 4/ 8/ 16 kHz
Order No.	8461470000
Type	MCZ VFC 0-10V
GTIN (EAN)	4032248037773
Qty.	10 items

Dimensions and weights

Depth	63.2 mm
Depth (inches)	2.488 inch
Width	6 mm
Width (inches)	0.236 inch
Length	91 mm
Length (inches)	3.583 inch
Net weight	28.4 g

Temperatures

Storage temperature	-20 °C...85 °C
Operating temperature	0 °C...60 °C

Probability of failure

SIL in compliance with IEC 61508

None

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1
SCIP	c2a21576-d875-4548-ae68-5e7f85ddf0c7

Input

Input resistance, voltage	100 kΩ
Input voltage	0...10 V
Number of inputs	1

Output

Load impedance current	≤ 600 Ω
Number of outputs	1
Output current	max. 20 mA
Output frequency	0...1/ 4/ 8/ 16 kHz
Output level	PNP, Ub-0.7 V

General data

Accuracy	0.2 % v. FSR
Configuration	DIP switch
Current consumption	14 mA without load
Galvanic isolation	between input ⁄ output ⁄ supply
Long-term drift	0
Rail	TS 35
Temperature coefficient	≤ 250 ppm/K
Voltage supply	24 V DC ± 10 %

Insulation coordination

EMC standards	EN 55011 EN 61000-6
Galvanic isolation	between input ⁄ output ⁄ supply
Impulse withstand voltage	1.5 kV
Insulation voltage	1 kV DC
Insulation voltage input or output/rail	4 kV_eff / 1 min.
Pollution severity	2
Rated voltage	100 V
Surge voltage category	III
Test voltage	0.3 kV

Connection data

Type of connection	Tension-clamp connection
Clamping range, rated connection	1.5 mm²
Clamping range, min.	0.5 mm²
Clamping range, max.	1.5 mm²
Wire connection cross section AWG, min.	AWG 26
Wire connection cross section AWG, max.	AWG 16
Wire cross-section, solid, min.	0.5 mm²
Wire cross-section, solid, max.	1.5 mm²
Wire cross-section, solid, min. (AWG)	AWG 26
Wire cross-section, solid, max. (AWG)	AWG 16
Wire connection cross section, finely stranded, min.	0.5 mm²
Wire connection cross section, finely stranded, max.	1.5 mm²
Wire cross-section, finely stranded, min. (AWG)	AWG 26
Wire cross-section, finely stranded, max. (AWG)	AWG 16
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.	0.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.	1.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	1.5 mm²

Downloads

Approval/Certificate/Document of Conformity	[Application notes -- Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_35494)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_55060)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.8461470000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=8461470000)
WSCAD Universe	[WSCAD data](https://wscaduniverse.com/part-detail?manufacturerId=88&type=0&partNumber=8461470000&norm=0)
User Documentation	[Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_43969)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC002918
ETIM 7.0	EC002918
ETIM 8.0	EC002918
ETIM 9.0	EC002918
ECLASS 9.0	27-21-01-28
ECLASS 9.1	27-21-01-28
ECLASS 10.0	27-21-01-28
ECLASS 11.0	27-21-01-28
ECLASS 12.0	27-21-01-28
ECLASS 13.0	27-21-01-28

Tender specification sheets

Long specification

DC/f converter for converting a 0...10 V standard signal to 0...1/ 4/ 8/ 16 kHz,
configured with DIP switches
DC/f converter in 6 mm width with external power supply for transmitting and
converting a 0...10 V standard signal into a proportional 0...1/ 4/ 8/ 16 kHz rectangular frequency.
The input and output circuits are electrically isolated.

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 91/ 6/ 63.2 mm
Tension-clamp connection / Nominal cross-section 1.5 mm²Protection degree: IP 20

Input                             0...10 V
Output                                                 0...1 kHz/ 4 kHz/ 8 kHz/ 16 kHz
                                          PNP: UB - 0.7V / max. 20 mA
Transmission error                  < 0,2 % v. E.
Temperature coefficient       < 250 ppm K
Auxiliary power                                         24 V DC +/- 10 %
Ambient
temperature range 0°C...+50 °C

Isolation                                    1.5 kV
Rated voltage 100 V
Overvoltage category III
pollution degree 2

Type MCZ VFC 0-10V

Short specification

DC/f converter for converting a 0...10 V standard signal to 0...1/ 4/ 8/ 16 kHz,
configured with DIP switches
DC/f converter in 6 mm width with external power supply,
for transmitting and converting a 0...10 V standard signals into a proportional 0...1/ 4/ 8/ 16 kHz rectangular frequency.
The input and output circuits are electrically isolated.

Approvals