ACT20-FEED-IN-BASIC-S   Item No. 1282490000

ACT20M, Supply module, Screw connection

Please note that any possible discounts or additional costs are not yet applied here. The definitive payment amounts will be shown in the cart.



Order No. 1282490000  
Version ACT20M, Supply module, Screw connection  
GTIN (EAN) 4050118072730  
Qty. 1 ST  
Width 6.1 mm  
Width (inches) 0.240157 inch  
Height 112.5 mm  
Height (inches) 4.429125 inch  
Weight 70 g  
Net weight 83 g  
Humidity 95 %, no condensation  
Operating temperature, max. 60 °C  
Operating temperature, min. -20 °C  
Storage temperature, max. 85 °C  
Storage temperature, min. -20 °C  
Operating temperature -20 °C...60 °C  
Ambient temperature -25 °C...+70 °C  
Ambient temperature -25 °C...+70 °C  
Storage temperature -20 °C...85 °C  
REACH SVHC Lead 7439-92-1  
UL certificate [E337701.pdf](PDF/QUYX.E337701.pdf)  
Number of inputs 1  
Input voltage 21.6…26.4 V DC  
Supply voltage (input) 21.6...26.4 V DC  
Input current 0.5...2.5 A DC  
Number of outputs 1  
Output voltage, note Corresponds to the input voltage  
Output current Equivalent to input current  
(Supply of e.g. 75 devices of ACT20M-CI-2CO-S on one CH20M BUS)  
Degree of efficiency 100 %  
Rail TS 35  
CH20M Bus  
Voltage supply 21.6...26.4 V DC  
EMC standards IEC 61326-1  
NE 21  
Max. switching voltage, DC 30 V  
Max. switching voltage, AC 250 V  
Rated switching current 2 A  
Rated switching voltage max. 250 V AC / max. 30 V DC  
Type of connection Screw connection  
Tightening torque, min. 0.4 Nm  
Tightening torque, max. 0.6 Nm  
Clamping range, rated connection 2.5 mm²  
Clamping range, min. 0.5 mm²  
Clamping range, max. 2.5 mm²  
Wire connection cross section AWG, min. AWG 30  
Wire connection cross section AWG, max. AWG 14  
Certificate No. (ATEX) KEMA10ATEX0183X  
Certificate No. (IECEX) IECEXKEM10.0090X  
Certificate no. (cULus) E337701  
IECEx - gas labelling Ex nA IIC T4 Gc  
Product information The ACT20-FEED-IN-BASIC-S device supplies the Weidmüller CH20M DIN-rail bus with an externally connected supply voltage of 24V DC ± 30%. The current-carrying capacity of the power- feed device is 2.5 A max.
The input current must be limited to this maximum value.  
Approval/Certificate/Document of Conformity [EAC certificate](  
[FM certificate](  
[IECEXx certificate](  
[ATEX certificate](  
[Declaration of Conformity](  
Brochure/Catalogue [CAT 4.1 ELECTR 16/17 EN](  
Engineering Data [EPLAN, WSCAD](LINK/CAE_EN.html)  
Engineering Data [STEP](  
CADENAS eCATALOG [Cax data](  
User Documentation [Instruction sheet](  
ETIM 6.0 EC001600  
ETIM 7.0 EC001600  
eClass 9.0 27-24-26-10  
eClass 9.1 27-24-26-10  
eClass 10.0 27-24-26-10  
Approvals ![CULUS](/picture/CULUS.gif) ![DETNORVER](/picture/DETNORVER.gif) ![DNVGL](/picture/DNVGL.gif) ![EAC](/picture/EAC.gif) ![FMEX](/picture/FMEX.gif) ![IECEXKEM](/picture/IECEXKEM.gif) ![KEMAATEX](/picture/KEMAATEX.gif)  
ROHS Conform  
UL File Number Search [E337701](LINK/UL_search.html)  


  • Item No.
  • Item No.
  • Item No.