ACT20X-HUI-SAO-LP-S Item No. 1318220000
Please note that any possible discounts or additional costs are not yet applied here. The definitive payment amounts will be shown in the cart.
Properties
| Type | ACT20X-HUI-SAO-LP-S |
| Order No. | 1318220000 |
| Version | ACT20X, EX signal isolating converter, 1-channel version, Output-loop powered |
| GTIN (EAN) | 4050118323955 |
| Qty. | 1 ST |
| Width | 12.5 mm |
| Width (inches) | 0.492125 inch |
| Height | 117.2 mm |
| Height (inches) | 4.614164 inch |
| Depth | 113.6 mm |
| Depth (inches) | 4.472432 inch |
| Net weight | 180 g |
| Humidity | 10…90 %, no condensation |
| Operating temperature, max. | 60 °C |
| Operating temperature, min. | 0 °C |
| Storage temperature, max. | 70 °C |
| Storage temperature, min. | -20 °C |
| Operating temperature | 0 °C...60 °C |
| Storage temperature | -20 °C...70 °C |
| REACH SVHC | Lead 7439-92-1 |
| Input current |
0...20 mA
4…20mA |
| Input resistance | 0…12 kΩ |
| Input resistance, current | 70 Ω |
| Input resistance, voltage |
> 10 MΩ @ 600 mV
2 MΩ @ 28 V |
| Input voltage |
configurable
± 12 V DC (min. measurement range 1 V) ± 28 V DC (min. measurement range 2 V) ± 600 mV DC (min. measurement range 50 mV) ± 150 mV DC (min. measurement range 15 mV) |
| Line resistance in measuring circuit | ≤ 50 Ω |
| Potentiometer | 1.2…500 kΩ |
| Sensor |
2-/3-/4-wire
RTD: PT10, PT20, PT50, PT100, PT250, PT300, PT400, PT500, PT1000, Ni50, Ni100, Ni120, Ni1000 Thermocouples: B, E, J, K, N, R, S, T ; in compliance with IEC 60584-1 and L, U in compliance with DIN43710 Potentiometer Resistance: 0 - 12 kΩ |
| Sensor supply | 28…16.5 V DC / 0…20 mA |
| Temperature input range | Adjustable from -200...+800°C |
| Type | intrinsically safe circuit |
| Type | Output-loop powered |
| Output signal limit | 3.8…20.5 mA / 0…20.5 mA (dependent on range) |
| Residual ripple (current loop) | ≤ 10 mVss |
| Output current | 4…20 mA (max. 23 mA) |
| Cut-off frequency (-3 dB) | 100 Hz |
| Load impedance current | ≤ 700 Ω |
| Influence of load resistance | ≤ 0.01% of span / 100 Ω |
| Configuration | With FDT/DTM software |
| Voltage supply |
via output current loop
11…28 V DC (loop powered) |
| Power consumption | ≤ 3.5 W |
| Accuracy | < 0.1 % of end value |
| Temperature coefficient | < 0.02 °C of measuring range / °C |
| Step response time | 250 ms (10…90%) |
| Protection degree | IP20 |
| Humidity | 10…90 %, no condensation |
| Type of connection | Screw connection |
| Impulse withstand voltage | 4 kV (1.2/50 µs) |
| Insulation voltage | 3.51 kV between input and output |
| Pollution severity | 2 |
| Rated voltage | 300 Veff |
| Standards |
DIN EN 61326-1
IEC 61010-1 IEC 61010-2-030 IEC 60079-0 IEC 60079-11 IEC 60079-15 IEC 60079-26 |
| Surge voltage category | III |
| Voltage U0 | 5.88 V DC |
| Current I0 | 88.2 mA |
| Power P0 | 129 mW |
| Marking |
II 3 G Ex nA IIC T4 Gc
I (M1) [Ex ia Ma] I II (1) D [Ex ia Da] IIIC |
| Installation location | Device installed in safe area, zone 2 |
| Type of connection | Screw connection |
| Tightening torque, min. | 0.4 Nm |
| Tightening torque, max. | 0.6 Nm |
| Clamping range, rated connection | 2.5 mm² |
| Clamping range, min. | 0.25 mm² |
| Clamping range, max. | 2.5 mm² |
| Wire connection cross section AWG, min. | AWG 26 |
| Wire connection cross section AWG, max. | AWG 12 |
| ATEX certificate | [13ATEX7368 + 11ATEX7043](ZIP/ATEX-certifikations.zip) |
| IEC Ex certificate | [IECEx certification](PDF/IECEx_ITA_11.0002X-Iss2.pdf) |
| cUL certificate | [UL certification](PDF/UL_20140506-E467804.pdf) |
| Product information | Weidmüller provides an extended guarantee period of 36 months for this device. |
| Approval/Certificate/Document of Conformity |
[Certification ATEX](http://download.weidmueller.com/asset/download/file/97164)
[Certification IECEx](http://download.weidmueller.com/asset/download/file/97165) [UL Certification](http://download.weidmueller.com/asset/download/file/103117) [Declaration of Conformity](http://download.weidmueller.com/asset/download/file/37671) |
| Brochure/Catalogue | [CAT 4.1 ELECTR 16/17 EN](http://download.weidmueller.com/asset/download/file/35322) |
| Engineering Data | [EPLAN, WSCAD](LINK/CAE_EN.html) |
| Engineering Data | [STEP](http://download.weidmueller.com/asset/download/file/89454) |
| CADENAS eCATALOG | [Cax data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1318220000) |
| Software | [WI-Manager, DTM-Library for online installation V.1.2.0](http://download.weidmueller.com/asset/download/file/35364) |
| User Documentation | [Instruction sheet](http://download.weidmueller.com/asset/download/file/37901) |
| Long specification |
Ex universal measurement isolating transformer for RTD-/ TC temperature and DC-current-/ voltage signals, Secure isolation EN 50178, 2-way isolation up to 4kV |
| Short specification |
Ex universal measurement isolating transformer for RTD-/ TC temperature and DC-current-/ voltage signals, |
| ETIM 6.0 | EC002653 |
| ETIM 7.0 | EC002653 |
| eClass 9.0 | 27-21-01-20 |
| eClass 9.1 | 27-21-01-20 |
| eClass 10.0 | 27-21-01-20 |
| Approvals |   |
| Approvals | CULUS; EAC; IECEXKEM; ATEX |
| ROHS | Conform |
Accessories
