ACT20P-AI-AO-DC-S   Item No. 1477420000

Signal converter/isolator, universal, Input : I/U universal, Output : I/U universal

Please note that any possible discounts or additional costs are not yet applied here. The definitive payment amounts will be shown in the cart.

ACT20P-AI-AO-DC-S ACT20P-AI-AO-DC-S ACT20P-AI-AO-DC-S ACT20P-AI-AO-DC-S

Properties

Type ACT20P-AI-AO-DC-S  
Order No. 1477420000  
Version Signal converter/isolator, universal, Input : I/U universal, Output : I/U universal  
GTIN (EAN) 4050118284959  
Qty. 1 ST  
Width 12.5 mm  
Width (inches) 0.492125 inch  
Height 119.2 mm  
Height (inches) 4.692904 inch  
Depth 113.7 mm  
Depth (inches) 4.476369 inch  
Weight 80 g  
Net weight 150 g  
Humidity 10…90 %, no condensation  
Operating temperature, max. 60 °C  
Operating temperature, min. -20 °C  
Storage temperature, max. 70 °C  
Storage temperature, min. -25 °C  
Operating temperature -20 °C...60 °C  
Storage temperature -25 °C...70 °C  
REACH SVHC Lead 7439-92-1  
Number of inputs 1  
Sensor supply 24 V DC  
Input voltage configurable  
0-11 V (min. measurement range 2 V)  
Input resistance, voltage ≥ 1 MΩ  
Input current configurable  
0-22 mA (min. measurement range 4 mA)  
Input resistance, current 100 Ω  
Resolution 3.5 µA / 1.76 mV per bit  
Number of outputs 1  
Output voltage, note Adjustable  
0...11 V  
Output range, min, 2 V  
Output current Adjustable  
0...22 mA  
Output range, min, 4 mA  
load impedance voltage > 600 Ω @ 10 V  
Load impedance current 1 kΩ @ 20 mA  
Offset voltage ≤ 20 mV  
Configuration DIP switch  
Keys and LED display  
with reference voltage/current sources  
Galvanic isolation 3-way isolator  
between input ⁄ output ⁄ supply  
Linearity < ± 0.1 % of signal range  
Typ. ± 0.05 % of signal range  
Long-term drift 0.1 % / 10.000 h  
Power consumption, typ. 3 W  
Rail TS 35  
Step response time 350 ms  
Temperature coefficient < 0.05 % / °C  
Voltage supply 12...60 V DC  
EMC standards IEC 61326-1  
Galvanic isolation 3-way isolator  
between input ⁄ output ⁄ supply  
Impulse withstand voltage 4 kV (1.2/50 µs)  
Insulation voltage 2 kV inputs / outputs  
Pollution severity 2  
Surge voltage category III  
Type of connection Screw connection  
Tightening torque, min. 0.4 Nm  
Tightening torque, max. 0.6 Nm  
Clamping range, rated connection 1.5 mm²  
Clamping range, min. 0.5 mm²  
Clamping range, max. 2.5 mm²  
Wire connection cross section AWG, min. AWG 26  
Wire connection cross section AWG, max. AWG 12  
Approval/Certificate/Document of Conformity [UL Certification](http://download.weidmueller.com/asset/download/file/103117)  
[Declaration of Conformity](http://download.weidmueller.com/asset/download/file/37674)  
Brochure/Catalogue [CAT 4.1 ELECTR 16/17 EN](http://download.weidmueller.com/asset/download/file/35322)  
Software [DIP switch configuration tool](http://download.weidmueller.com/asset/download/file/35389)  
User Documentation [Instruction sheet](http://download.weidmueller.com/asset/download/file/35743)  
ETIM 6.0 EC002653  
ETIM 7.0 EC002653  
eClass 9.0 27-21-01-20  
eClass 9.1 27-21-01-20  
eClass 10.0 27-21-01-20  
Approvals ![CE](/picture/CE.gif) ![EAC](/picture/EAC.gif)  
Approvals CULUS;  
ROHS Conform  

Accessories

  • Item No.
    1912130000
  • Item No.
    1082490000