text.skipToContent text.skipToNavigation

PRO ECO 480W 48V 10A

PRO ECO 480W 48V 10A — Electric symbol

PRO ECO 480W 48V 10A — Derating curve

PRO ECO 480W 48V 10A — Derating curve

PRO ECO 480W 48V 10A — Derating curve

Lataa tietosivu

PRO ECO 480W 48V 10A

Power supply, switch-mode power supply unit, 48 V

Tuotteen tunnus 1469610000

Ominaisuudet

General ordering data

Version	Power supply, switch-mode power supply unit, 48 V
Order No.	1469610000
Type	PRO ECO 480W 48V 10A
GTIN (EAN)	4050118275490
Qty.	1 items

Dimensions and weights

Depth	120 mm
Depth (inches)	4,724 inch
Height	125 mm
Height (inches)	4,921 inch
Width	100 mm
Width (inches)	3,937 inch
Net weight	1 561 g

Storage temperature	-40 °C...85 °C
Operating temperature	-25 °C...70 °C

Environmental Product Compliance

REACH SVHC	Lead 7439-92-1
SCIP	6d8cdf22-8230-4af8-86c8-3558c716666d

AC current consumption	2.4 A @ 230 V AC / 5.2 A @ 110 V AC
AC input voltage range	85...264 V AC (derating at 100 V AC)
Connection system	Screw connection
DC current consumption	1.5 A @ 370 V DC / 4.6 A @ 120 V DC
DC input voltage range	80...370 V DC (Derating @ 120 V DC)
Frequency range AC	47...63 Hz
Input frequency	47...63 Hz
Input fuse (internal)	Yes
Inrush current	max. 3 A
Nominal power consumption	516,1 VA
Rated input voltage	100...240 V AC
Recommended back-up fuse	6 A / DI, safety fuse 16 A, Char. B, circuit breaker 6…8 A, Char. C, circuit breaker
Surge protection	Varistor

Capacitive load	unrestricted
Connection system	Screw connection
Continous output current @ U_Nominal	10 A @ 55 °C 2.5 A @ 70 °C
Nominal output current for U_nom	10 A @ 55 °C
Output power	480 W
Output voltage, max.	56 V
Output voltage, min.	42 V
Output voltage, note	(adjustable via potentiometer)
Overload protection	Yes
Parallel connection option	yes, max. 3
Protection against inverse voltage	Yes
Ramp-up time	≤ 100 ms
Rated output voltage	48 V DC ± 1 %
Residual ripple, breaking spikes	< 100 mV ss @ 48 V DC, I Nenn

AC failure bridging time @ I_nom	> 20 ms @ 230 V AC / > 20 ms @ 115 V AC
Degree of efficiency	93%
Earth leakage current, max.	3,5 mA
Housing version	Metal, corrosion resistant
Indication	Green LED (U_output > 21.6 V DC) Yellow LED (l_output > 90 % I_Rated typ. ) red LED (overload, overtemperature, short-circuit, U_output < 20.4 V DC)
Max. perm. air humidity (operational)	5 %…95 % RH
Mounting position, installation notice	on terminal rail TS 35
MTBF	According to Standard: SN 29500 Operating time (hours), min.: 2 000 000 h Ambient temperature: 25 °C Input voltage: 230 V Output power: 480 W Duty cycle: 100 % According to Standard: SN 29500 Operating time (hours), min.: 904 000 h Ambient temperature: 40 °C Input voltage: 230 V Output power: 480 W Duty cycle: 100 %
Power factor (approx.)	> 0.98…230 V AC / > 0.98…115 V AC
Power loss, idling	5 W
Power loss, nominal load	50 W
Protection against over-heating	Yes
Protection against reverse voltages from the load	58…65 V DC
Protection degree	IP20
Short-circuit protection	Yes
Surge voltage category	II

EMC / shock / vibration

Interference immunity test acc. to	EN 61000-4-2 (ESD) EN 61000-4-3 (RS) EN 61000-4-4 (burst) EN 61000-4-5 (surge) EN 61000-4-6 (conducted) EN61000-4-8 (Fields) EN61000-4-11 (Dips)
Limiting of mains voltage harmonic currents	According to EN 61000-3-2
Noise emission in accordance with EN55032	Class B
Shock resistance IEC 60068-2-27	15 g In all directions
Vibration resistance IEC 60068-2-6	1 g according to EN 50178

Insulation coordination

Insulation voltage input / earth	2 kV
Insulation voltage output / earth	0,5 kV
Insulation voltage, input/output	3 kV
Pollution severity	2
Protection class	I, with PE connection
Surge voltage category	II

Electrical safety (applied standards)

Electrical machine equipment	Acc. to EN60204
For use with electronic equipment	Acc. to EN50178 / VDE0160
Protection against dangerous shock currents	Acc. to VDE0106-101
Protective separation / protection against electrical shock	VDE0100-410 / acc. to DIN57100-410
Safety extra-low voltage	SELV acc. to IEC 60950-1 PELV according to EN 60204-1
Safety transformers for switch-mode power supplies	According to EN 61558-2-16

Connection data (input)

Conductor cross-section, AWG/kcmil , max.	12
Conductor cross-section, AWG/kcmil , min.	26
Conductor cross-section, flexible , min.	0,5 mm²
Conductor cross-section, rigid , max.	6 mm²
Conductor cross-section, rigid , min.	0,5 mm²
Connection system	Screw connection
Number of terminals	3 for L/N/PE
Tightening torque, max.	0,6 Nm
Tightening torque, min.	0,5 Nm
Wire connection cross section, flexible (input), max.	2,5 mm²

Connection data (output)

Conductor cross-section, AWG/kcmil , max.	10
Conductor cross-section, AWG/kcmil , min.	26
Conductor cross-section, flexible , max.	4 mm²
Conductor cross-section, flexible , min.	0,22 mm²
Conductor cross-section, rigid , max.	6 mm²
Conductor cross-section, rigid , min.	0,5 mm²
Connection system	Screw connection
Number of terminals	7 (++,---,13,14)
Tightening torque, max.	0,6 Nm
Tightening torque, min.	0,5 Nm

Contact load (NO contact)	max. 30 V DC / 1 A
Floating contact	Yes
Relay on/off	Output voltage >21.6 V DC/ <20.4 V DC, overload

Certificate no. (cULus)	E258476
Institute (cULus)	CULUS

Approval/Certificate/Document of Conformity	[UL508 CSA C22.2 Certificate.pdf](https://mdcop.weidmueller.com/mediadelivery/asset/900_306081) [Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_35495) [UK Conformity Assessed](https://mdcop.weidmueller.com/mediadelivery/asset/900_314089)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_89467)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.1469610000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1469610000)
WSCAD Universe	[WSCAD data](https://wscaduniverse.com/part-detail?manufacturerId=88&type=0&partNumber=1469610000&norm=0)
User Documentation	[Operating instructions](https://mdcop.weidmueller.com/mediadelivery/asset/900_68813)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC002540
ETIM 7.0	EC002540
ETIM 8.0	EC002540
ETIM 9.0	EC002540
ECLASS 9.0	27-04-07-01
ECLASS 9.1	27-04-07-01
ECLASS 10.0	27-04-07-01
ECLASS 11.0	27-04-07-01
ECLASS 12.0	27-04-07-01
ECLASS 13.0	27-04-90-02

Approvals	![CE](/picture/CE.gif) ![CULUS](/picture/CULUS.gif) ![TUEV](/picture/TUEV.gif) ![UKCA](/picture/UKCA.gif)
ROHS	Conform
UL File Number Search	[UL Website](LINK/UL_search.html)
Certificate no. (cULus)	E258476

Lisävarusteet

ToolsScrewdriversVDE-insulated SlimLine screwdriverSlotted screwdriver

SDIS SLIM 0.6X3.5X100

SDIS SLIM 0.6X3.5X100

Tuotteen tunnus:

2749610000

VPE:

1 items

Mounting tool, Blade width (B): 3.5 mm, Blade length: 100 mm, Blade thickness (A): 0.6 mm

Tuotesivu Lataukset

Terminal BlocksAccessoriesEnd bracketsTS 35W-Series

WEW 35/2 V0 GF SW

WEW 35/2 V0 GF SW

Tuotteen tunnus:

1479000000

VPE:

50 items

End bracket, Wemid, black, Rail: TS 35, when screwed in

Tuotesivu Lataukset

WEW 35/1 V0 GF SW

WEW 35/1 V0 GF SW

Tuotteen tunnus:

1478990000

VPE:

50 items

End bracket, Wemid, black, Rail: TS 35, when screwed in

Tuotesivu Lataukset