VPU II 2 R PV 1000V DC
VPU II 2 R PV 1000V DC
Electric symbol
Circuit diagram

VPU II 2 R PV 1000V DC

Tämä tuote ei ole pian enää saatavana.

Vaihtoehtoinen tuote: 2530180000

Surge voltage arrester, Low voltage, with remote contact

Tuotteen tunnus 1351240000
Avaa konfiguraattorissa
Lataa tietosivu Tekninen tuki Tuotelataukset
Lisävarusteet 2 Varaosat 2 Samankaltaiset tuotteet 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert General data Insulation coordination acc. to EN 50178 Photovoltaic technical data Rated data IEC / EN Connection data Electrical data General data Classifications Tender specification sheets

Approvals

Homologaciones
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, with remote contact 
N. d’ordine
1351240000 
Tipo
VPU II 2 R PV 1000V DC 
GTIN (EAN)
4050118158816 
Cantidad
1 items
배송 상태
This article will no longer be available in the future. 
Last order date
/Date(1774908000000)/ 
Alternatív termék
[2530180000](~/p/2530180000) 

Dimensions and weights

Hloubka
69 mm
Depth (inches)
2,717 inch
Posizione verticale
106 mm
Height (inches)
4,173 inch
Anchura
35,6 mm
Width (inches)
1,402 inch
Mounting dimension - height
75 mm
Net weight
288 g

Temperatures

Temperatura de almacenamiento
-40 °C...80 °C 
Température de fonctionnement
-40 °C...70 

Environmental Product Compliance

RoHS megfelelőségi állapot
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Connection type
PUSH IN 
Cross-section for connected wire, solid core, max.
1,5 mm²
Cross-section for connected wire, solid core, min.
0,14 mm²
Stripping length
8 mm

General data

Colour
black 
orange 
Design
Installation housing; 2TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 2000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 
UL 94 flammability rating
V-0 
Version
with remote contact 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Photovoltaic technical data

Discharge current In (8/20 µs)
12.5 kA 
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE
1 000 V
Protection level Up (+/-)
≤ 5,6 kV 
Protection level Up (+/PE)
≤ 2,8 kV 
Protection level Up (-/PE)
≤ 2.8 kV 
PV system voltage, max. Ucpv
1 000 V
Requirements class
Type II 
Short-circuit curent ISCPV
200 A
Standards
EN 50539-11 

Rated data IEC / EN

Discharge current Imax (8/20µs) wire-PE
25 kA 
Discharge current In (8/20µs) wire-PE
12.5 kA 
Integrovaná záložní pojistka
No 
Leakage current at Un
30 µA
Max. continuous voltage, Uc (DC)
1000 V 
Number of poles
2 
PV voltage, acc. to IEC 60364-7-712
≤ 1000 V 
Rated voltage (DC)
1000 V 
Response time / fallback time
≤ 25 ns 
Signalling contact
250 V 1A 1CO 
125 V AC / 1 A 
48 V CC / 0.5 A 
24 V DC / 0,5 A 
SPD typ
T2 
Standards
EN 50539-11 
Voltage type
DC 

Connection data

Stripping length
15 mm
Type of connection
Screw connection 
Длина снятия изоляции Измерительное соединение
15 mm
Момент затяжки, мин.
2 Nm
Tightening torque, max.
3 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
1,5 mm²
Clamping range, max.
35 mm²
Wire cross-section, solid, min.
1,5 mm²
Wire cross-section, solid, max.
16 mm²
Wire connection cross section, finely stranded, min.
1,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
1,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
50 mm²
Connection cross-section, stranded, min.
1,5 mm²
Connection cross-section, stranded, max.
50 mm²

Electrical data

Voltage type
DC 

General data

Number of poles
2 
Protection degree
IP20 
Colour
black 
orange 

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-90-90 
ECLASS 15.0
27-17-90-90 

Tender specification sheets

Long specification
Multi-pole surge voltage arrestor according to the requirements of Class II acc. to IEC 50539-11. Consisting of V0 material, the arrestor serves as overvoltage protection and is used in applications according to IEC 50539-12. The use of a high-performance varistor meets the inspection requirements for Class II surge protection systems on the basis of the standards. The arrestor is installed in the vicinity of the equipment that needs protection, in a commercially available installation/electrical distribution enclosure. With thermal separation device on the varistor. If protection is no longer available, the colour in the display window changes from green to red. The functional state is also displayed by a voltage-free signalling contact (CO contact). Rated voltage: 1000 VDC In/max (8/20 µs): 12.5/25 kA, protection level < 2.8 kV, telecommunication output: contact: 250 V/0.5 A 48 VDC/0.1 A, type: Weidmüller VPU II 2 R PV 1000 V/25 kA, Order No. 1351240000 or equivalent 
Short specification
Class II arrester with In/Imax: 12.5/25 kA suitable for PV systems. Protection level < 2.8 kV. With remote alert Type: Weidmüller VPU II 2 R PV 1000 V/25 kA Order no. 1352400000 or equivalent