SCDN 3.81/10/90G 3.2SN BK BX
Изображение изделия
SCDN 3.81/10/90G 3.2SN BK BX
Изображение изделия
SCDN 3.81/10/90G 3.2SN BK BX
Dimensional drawing

SCDN 3.81/10/90G 3.2SN BK BX

Данный продукт вскоре больше не будет доступен.

Last order date: /Date(1793401200000)/

PCB plug-in connector, male header, closed side, THT solder connection, 3.81 mm, Number of poles: 10, 90°, Solder pin length (l): 3.2 mm, tinned, black, Box

ID výrobku 1040830000
Stáhnout datový list Инженерная поддержка Загрузка продуктов
Является эквивалентом 1 Связанные продукты 16
Approvals General ordering data Abmessungen und Gewichte Environmental Product Compliance Systemkennwerte Werkstoffdaten Rated data acc. to IEC Rated data acc. to CSA UL 1059에 따른 정격 데이터 Verpackungen Important note Clasificaciones

Approvals

ROHS
Conform 

General ordering data

Version
PCB plug-in connector, male header, closed side, THT solder connection, 3.81 mm, Number of poles: 10, 90°, Solder pin length (l): 3.2 mm, tinned, black, Box 
Order No.
1040830000 
Type
SCDN 3.81/10/90G 3.2SN BK BX 
GTIN (EAN)
4032248769681 
Qty.
50 Pezzo
Parametri prodotto
IEC: 320 V / 17.5 A
UL: 300 V / 11 A 
Imballaggio
Box 
Delivery status
In futuro questo articolo non sarà più disponibile. 
Last order date
/Date(1793401200000)/ 

Abmessungen und Gewichte

Depth
13,3 mm
Depth (inches)
0,524 inch
Height
18,4 mm
Height (inches)
0,724 inch
Height of lowest version
15,2 mm
Width
20,44 mm
Largeur (pouces)
0,805 inch
Net weight
4,06 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Systemkennwerte

Product family
OMNIMATE Signal - Serie BC/SC 3.81 
Type of connection
Board connection 
Mounting onto the PCB
Conexión por soldadura THT 
Pitch in mm (P)
3,81 mm
Pitch in inches (P)
0,15 "
Outgoing elbow
90° 
Number of poles
10 
Number of solder pins per pole
1 
Solder pin length (l)
3,2 mm
Solder pin length tolerance
+0,02 / -0.2 mm 
Solder pin dimensions
d = 1.0 mm 
Octagonal 
Solder pin dimensions = d tolerance
0 / -0,03 mm 
Solder eyelet hole diameter (D)
1,2 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
L1 in mm
15,24 mm
L1 in inches
0,6 "
Number of rows
2 
Pin series quantity
2 
Touch-safe protection acc. to DIN VDE 57 106
finger-safe unplugged/ back-of-hand-safe plugged 
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Rezystancja skrośna
≤5 mΩ 
element kodowany
Tak 

Werkstoffdaten

Insulating material
PA GF 
Colour
black 
Colour chart (similar)
RAL 9011 
Insulating material group
II 
Comparative Tracking Index (CTI)
≥ 550 
UL 94 可燃性等級
V-0 
Contact material
Copper alloy 
Contact surface
tinned 
Temperatura magazynowania, min.
-40 °C
Temperatura magazynowania, max.
70 °C
Temperatura pracy, min.
-50 °C
Temperatura pracy, max.
120 °C
Zakres temperatur montaż, min.
-25 °C
Zakres temperatur montaż, max.
120 °C

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
17,5 A
Rated current, max. number of poles (Tu=20°C)
13,2 A
Rated current, min. number of poles (Tu=40°C)
17 A
Rated current, max. number of poles (Tu=40°C)
12,2 A
Rated voltage for surge voltage class / pollution degree II/2
320 V
Rated voltage for surge voltage class / pollution degree III/2
160 V
Rated voltage for surge voltage class / pollution degree III/3
160 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
2,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
2,5 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
2,5 kV
Short-time withstand current resistance
3 x 1s with 76 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
11 A
Rated current (Use group D / CSA)
10 A

UL 1059에 따른 정격 데이터

Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
11 A
Rated current (Use group D / UL 1059)
10 A

Verpackungen

Packaging
Box 
VPE length
25 mm
VPE width
130 mm
VPE height
205 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • P on drawing = pitch
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Clasificaciones

ETIM 8.0
EC002637 
ETIM 9.0
EC002637 
ETIM 10.0
EC002637 
ECLASS 14.0
27-46-02-01 
ECLASS 15.0
27-46-02-01