LP 5.08/03/135 4.5SN OR BX
Product image
Similar to illustration
LP 5.08/03/135 4.5SN OR BX
Dimensional drawing
LP 5.08/03/135 4.5SN OR BX
Graph

LP 5.08/03/135 4.5SN OR BX

Printed circuit board terminals, 5.08 mm, Number of poles: 3, 135°, Solder pin length (l): 4.5 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box

Product ID 1595700000
Gegevensblad downloaden Productdownloads
Toebehoren 4 Verwante producten 10
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Printed circuit board terminals, 5.08 mm, Number of poles: 3, 135°, Solder pin length (l): 4.5 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box 
Order No.
1595700000 
Type
LP 5.08/03/135 4.5SN OR BX 
GTIN (EAN)
4008190190286 
Cantidad
100 items
Product data
IEC: 500 V / 32 A / 0.5 - 6 mm²
UL: 300 V / 20 A / AWG 26 - AWG 12 
Packaging
Box 

Dimensions and weights

Hloubka
17,5 mm
Depth (inches)
0,689 inch
Height
21,3 mm
Height (inches)
0,839 inch
Height of lowest version
16,8 mm
Width
15,84 mm
Width (inches)
0,624 inch
Net weight
4,189 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LP 
Wire connection method
Clamping yoke connection 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
135° 
Pitch in mm (P)
5,08 mm
Pitch in inches (P)
0,2 "
Number of poles
3 
Pin series quantity
1 
Fitted by customer
Yes 
Number of rows
1 
Max. adjacent poles per row
24 
Solder pin length (l)
4,5 mm
Solder pin dimensions
0.75 x 0.9 mm 
Solder eyelet hole diameter (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Number of solder pins per pole
1 
Screwdriver blade
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Tightening torque, min.
0,5 Nm
Tightening torque, max.
0,6 Nm
Clamping screw
M 3 
Stripping length
6 mm
L1 in mm
10,16 mm
L1 in inches
0,4 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
1.20 mΩ 

Material data

Insulating material
PA 
Colour
orange 
Tableau des couleurs (similaire)
RAL 2000 
Insulating material group
I 
Comparative Tracking Index (CTI)
≥ 600 
UL 94 flammability rating
V-2 
Material de contacto
Cu-alloy 
Powierzchnia styku
tinned 
Coating
1-3 μm Ni 
4-6 μm SN 
Tinning type
matt 
Structure en couches du raccordement soudé
4...6 µm Ni / 4...6 µm Sn 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Conductors suitable for connection

Clamping range, min.
0,13 mm²
Clamping range, max.
6 mm²
Wire connection cross section AWG, min.
AWG 26 
Sección de conexión del conductor AWG, máx.
AWG 12 
Solid, min. H05(07) V-U
0,5 mm²
Rígido, máx. H05(07) V-U
6 mm²
Flexible, min. H05(07) V-K
0,5 mm²
Flexible, max. H05(07) V-K
4 mm²
mit AEH mit Kragen DIN 46 228/4, min.
0,5 mm²
med ändhylsa med krage DIN 46 228/4, max.
2,5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,5 mm²
con terminal tubular según DIN 46 228/1, máx.
2,5 mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.8 mm x 2.4 mm; 3.0 mm 
Conduttore innestabile
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409500000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409700000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
32 A
Rated current, max. number of poles (Tu=20°C)
30,5 A
Rated current, min. number of poles (Tu=40°C)
32 A
Rated current, max. number of poles (Tu=40°C)
25 A
Rated voltage for surge voltage class / pollution degree II/2
500 V
Rated voltage for surge voltage class / pollution degree III/2
250 V
Rated voltage for surge voltage class / pollution degree III/3
250 V
Märkspänning vid överspänningsk./Nedsmutsningsgrad II/2
4 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4 kV
Номинальное импульсное напряжение при категории помехозащищенности/Категория загрязнения III/3
4 kV
Short-time withstand current resistance
3 x 1s with 120 A 

Rated data acc. to CSA

Institute (CSA)
CSA 
Certificate No. (CSA)
200039-1202191 
Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
20 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 26 
Wire cross-section, AWG, max.
AWG 12 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
20 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 26 
Wire cross-section, AWG, max.
AWG 12 

Packing

Packaging
Box 
VPE length
129 mm
VPE width
103 mm
VPE height
66 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01