text.skipToContent text.skipToNavigation

Download datablad Anvendte produkter

PVN DC 2I 1O 1MPP RD EVO 11

Photovoltaics, Combiner Box, Fireman's switch, 1 MPP, 2 Inputs / 1 Output per MPP, Remote disconnector, MC4-Evo 2, 1100 V

Produkt ID 2888520000

Egenskaber

General ordering data

Version	Photovoltaics, Combiner Box, Fireman's switch, 1 MPP, 2 Inputs / 1 Output per MPP, Remote disconnector, MC4-Evo 2, 1100 V
Order No.	2888520000
Type	PVN DC 2I 1O 1MPP RD EVO 11
GTIN (EAN)	4064675875567
Qty.	1 Styk

Dimensions and weights

Depth	135 mm
Depth (inches)	5,315 inch
Height	370 mm
Height (inches)	14,567 inch
Width	200 mm
Width (inches)	7,874 inch
Net weight	2.268 g

Temperatures

Ambient temperature	-20 °C...+50 °C
Humidity	5...95 %, no condensation

Environmental Product Compliance

RoHS Compliance Status	Compliant with exemption
RoHS Exemption (if applicable/known)	6c, 7a, 7cI
REACH SVHC	Lead 7439-92-1
SCIP	bdab5698-6a20-4370-8e28-8810d882d01a

Guarantee

Time interval

5 years

Electrical characteristics

Current per Maximum Power Point, max.	30 A
Rated DC voltage	1.100 V
Rated short-term current resistance	Rated current: 37,5 A

Enclosure

Connection type string	Plug MC4-Evo 2
Enclosure attachment	Via mounting foots
Impact resistance	IK08 in accordance with IEC 62208 IK10 in accordance with IEC 62262
Insulating material	Polyester glass-fibre reinforced, Polycarbonate
Protection class	II
Type of mounting	Wall mounting

General data

Installation location	Protected outdoor area (>1 km from sea)
Protection degree	IP65

Inputs

Amount of maximum power points (MPP)	1
DC Input + & -	Wire connection: Type of connection: Stäubli MC4-Evo 2 connector Compatible cable crossection: TÜV 2 Pfg1169/08.07 Wire cross-section, min.: 2,5 mm² Wire cross-section, max.: 16 mm²
Fuse type	Neither fuse cartridge nor holder
Max. number of DC inputs	per Maximum Power Point 2 inputs connected in parallel
Number of conduit inlets	4
Number of string inputs per MPP	≤ 2
Number of inputs	2

Outputs

DC Output + & -	Wire connection: Type of connection: Stäubli MC4-Evo 2 connector Compatible cable crossection: TÜV 2 Pfg1169/08.07 Wire cross-section, min.: 2,5 mm² Wire cross-section, max.: 16 mm²
Max. number of DC outputs	per Maximum Power Point 1 output

Remote disconnector

Automatic reclosing after voltage drop	Yes
Number of operating cycles	10000
Control voltage	100 V AC - 250 V AC 50/60Hz
Remote disconnector auxiliary contact	Cable entry: Number of cable entries: 1 Wire connection: Type of connection: Screw terminal connectors Flexible, max. H05(07) V-K: 1,5 mm² w. wire end ferrule, DIN 46228 pt 1, max.: 1,5 mm²
Remote disconnector control contact	Cable entry: Number of cable entries: 1 Wire connection: Type of connection: Screw terminal connectors Flexible, max. H05(07) V-K: 1,5 mm² w. wire end ferrule, DIN 46228 pt 1, max.: 1,5 mm²
Type of power circuit disconnection	Under voltage tripping or manual switch operation
Turn-off time	1.5 s
Current consumption of switch	Type of switch: Fireman switch Current consumption, note: The Peak current only arises for a short time when the capacitors of the fireman switch were previously completely discharged. Current consumption peak: 300 mA Current consumption continuous: 30 mA
Number of breaking operation cycles at rated current	300
Switch disconnector execution	Remote disconnector inside enclosure
Switching disconnector capacity	IEC 60947-3 DC-PV1

Important note

Product information

The SCIP number was assigned due to a lead content of more than 0.1 % of the net weight.

Safe use instruction according to ECHA:
The identification of the hazardous substance is sufficient to allow safe use of the article throughout its life cycle, including the service life, disassembly and waste/recycling phase

Downloads

Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_301856)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.2888520000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=2888520000)
WSCAD Universe	[WSCAD data](https://wscaduniverse.com/part-detail?manufacturerId=88&type=0&partNumber=2888520000&norm=0)
Technical Documentation	[CAD data -- Schematic diagram](https://mdcop.weidmueller.com/mediadelivery/asset/900_290533) [2888520000 Customer drawing](https://mdcop.weidmueller.com/mediadelivery/asset/900_305533)
User Documentation	[MANUAL PV NEXT RD DE/EN](https://mdcop.weidmueller.com/mediadelivery/asset/900_262445)
White paper	[Fact Sheet DE PV CB Lastentrennschalter](https://mdcop.weidmueller.com/mediadelivery/asset/900_290540) [Fact-Sheet EN PV CB Load break switch](https://mdcop.weidmueller.com/mediadelivery/asset/900_290549) [Fact Sheet DE PV Feuerwehrschalter](https://mdcop.weidmueller.com/mediadelivery/asset/900_310692) [Fact Sheet EN PV Fireman switch](https://mdcop.weidmueller.com/mediadelivery/asset/900_310693)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC002928
ETIM 7.0	EC002928
ETIM 8.0	EC003857
ETIM 9.0	EC003857
ECLASS 9.0	22-57-92-03
ECLASS 9.1	22-57-02-90
ECLASS 10.0	22-57-02-90
ECLASS 11.0	22-57-02-92
ECLASS 12.0	22-57-02-92
ECLASS 13.0	22-57-02-92
ECLASS 14.0	22-57-02-92

Tender specification sheets

Long specification

Automatic ON and OFF switching fireman switch for the connection to 1 MPP tracker in the inverter.
Suitable for remote disconnection of the DC side by the fire department.
Max. string voltage Uoc: 1100V

MPP1:
2 inputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
1 output, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

DC fireman switch:
Switching off by undervoltage tripping.
Automatic reconnection after the control voltage (230 V AC) is applied again.
With signal contact.

Connection of the fireman switch control line 230 VAC via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm².
Connection of the signal contact 24 VDC via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm².
Protection class: IP65.
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 370x200x135mm.

Approval according to low voltage switchgear IEC 61439-1:2011 and EN 61439-2:2011

Approvals