VPU AC II+III 0 L-N 440/20 S        
VPU AC II+III 0 L-N 440/20 S        
Electric symbol
Schematic circuit diagram

VPU AC II+III 0 L-N 440/20 S        

Surge voltage arrester, Low voltage, Spare arrester, TN-S, TT

Ürün No. 2908540000
Veri sayfasını indir Ürün İndirmleri
Aksesuarlar 1 aksesuarıdır 8 İlgili ürünler 3
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, Spare arrester, TN-S, TT 
Order No.
2908540000 
Type
VPU AC II+III 0 L-N 440/20 S         
GTIN (EAN)
4099986190955 
Qty.
1 adet

Dimensions and weights

Depth
54 mm
Depth (inches)
2,126 inch
Height
45,3 mm
Height (inches)
1,783 inch
Width
18 mm
Width (inches)
0,709 inch
Net weight
89 g

Temperatures

Ambient temperature
-40 °C…85 °C 
Operating temperature
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Connection type
PUSH IN 

General data

IP20 in installed state 
Colour
grey 
Design
Installation housing; 1TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 2000 m 
≤ 4000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Segment
Power distribution 
UL 94 flammability rating
V-0 
Version
Spare arrester 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Rated data IEC / EN

Contatto di segnalazione
No 
Frequency range, max.
60 Hz
Integrated back-up fuse
No 
Kombinált impulzus, UOC
6 kV
Numero di poli
1 
Rete a bassa tensione
TN-S 
TT 
Sovratensione temporanea - TOV
440 V
Tensione nominale (AC)
230 V
Tipo di tensione
AC 
Zakres częstotliwości, min.
50 Hz
Категория требований по IEC 61643-11
Type II 
Type III 
Класс требований согласно EN 61643-11
T2 
T3 
Макс. продолжительное напряжение, Uc (AC)
440 V 
Номинальный ток короткого замыкания ISCCR
25 kA
Нормы
IEC 61643-11 
EN 61643-11 
Разрядный ток, Iн (8/20 мкс), провод – защ. заземление (PE)
10 kA 
Ток утечки (тип III)
3 kA
Ток утечки, Iмакс. (8/20 мкс), провод – защ. заземление (PE)
20 kA 
Уровень защиты, Up при IN (L/N-PE)
≤ 1.7 kV 
≤ 1.4 kV 
반응 시간/대체 시간
≤ 25 ns 
퓨즈 보호
No Fuse neccessary ≤100 A gG 
Protection level Up at IN (L-PE) (type III)
≤1 kV 

Connection data

Conductor connection cross-section PE, solid, max.
35 mm²
Conductor connection cross-section PE, stranded, max.
35 mm²
Stripping length
13 mm
Wire connection method
Screw connection 
Type of connection
Screw connection 
Stripping length, rated connection
15 mm
Wire cross-section, solid, min.
2,5 mm²
Wire cross-section, solid, max.
10 mm²
Wire connection cross section, finely stranded, min.
2,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Connection cross-section, stranded, min.
2,5 mm²
Connection cross-section, stranded, max.
10 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
1 
IP20 in installed state 
Colour
grey 

Guarantee

Time interval
5 years 

Important note

Product information
For use in DC applications, please use the fuse of SIBA Type NH2XL aR/aSF DC 1500 V 

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-12-02 
ECLASS 15.0
27-17-12-02