VPU II 2 R PV 600V DC

Surge voltage arrester, Low voltage, with remote contact

Produkt ID 1351370000

Egenskaber

General ordering data

Version	Surge voltage arrester, Low voltage, with remote contact
Order No.	1351370000
Type	VPU II 2 R PV 600V DC
GTIN (EAN)	4050118158717
Qty.	1 Styk

Dimensions and weights

Depth	69 mm
Depth (inches)	2,717 inch
Height	106 mm
Height (inches)	4,173 inch
Width	35,6 mm
Width (inches)	1,402 inch
Mounting dimension - height	75 mm
Net weight	0,304 g

Temperatures

Storage temperature	-40 °C...80 °C
Operating temperature	-40 °C...70

Environmental Product Compliance

RoHS Compliance Status	Compliant without exemption
REACH SVHC	No SVHC above 0.1 wt%

Connection data, remote alert

Connection type	PUSH IN
Cross-section for connected wire, solid core, max.	1,5 mm²
Cross-section for connected wire, solid core, min.	0,14 mm²
Stripping length	8 mm

General data

Colour	black orange
Design	Installation housing; 2TE Insta IP 20
Operating altitude	≤ 2000 m
Optical function display	green = OK; red = arrester is defective - replace
Protection degree	IP20
Rail	TS 35
UL 94 flammability rating	V-0
Version	with remote contact

Insulation coordination acc. to EN 50178

Pollution severity	2
Surge voltage category	III

Photovoltaic technical data

Discharge current I_n (8/20 µs)	12.5 kA
Discharge current, max. (8/20 µs)	40 kA
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE	600 V
Operating height in the grounded PV system	≤ 2000 m
Operating height in ungrounded PV system	≤ 2000 m
Protection level U_p (+/-)	≤ 4.4 kV
Protection level U_p (+/PE)	≤ 2.2 kV
Protection level U_p (-/PE)	≤ 2.2 kV
PV system voltage, max. U_cpv	600 V
Requirements class	Type II
Short-circuit curent I_SCPV	200 A
Standards	EN 50539-11
Total discharge current I_total ( 8/20µs)	40

Rated data IEC / EN

Discharge current I_n (8/20µs) wire-PE	20 kA
Discharge current, max. (8/20 µs)	40 kA
Leakage current at U_n	30 µA
Max. continuous voltage, Uc (DC)	600 V
Number of poles	2
PV voltage, acc. to IEC 60364-7-712	< 600 V
Rated voltage (DC)	600 V
Response time	≤ 25 ns
Signalling contact	250 V 1A 1CO 125 V AC / 1 A 48 V CC / 0.5 A 24 V DC / 0,5 A
SPD type	T2
Standards	EN 50539-11
Voltage type	DC

Connection data

Stripping length	15 mm
Type of connection	Screw connection
Stripping length, rated connection	15 mm
Tightening torque, min.	2 Nm
Tightening torque, max.	3 Nm
Clamping range, rated connection	16 mm²
Clamping range, min.	1,5 mm²
Clamping range, max.	35 mm²
Wire cross-section, solid, min.	1,5 mm²
Wire cross-section, solid, max.	16 mm²
Wire connection cross section, finely stranded, min.	1,5 mm²
Wire connection cross section, finely stranded, max.	25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	1,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	50 mm²
Connection cross-section, stranded, min.	1,5 mm²
Connection cross-section, stranded, max.	50 mm²

Electrical data

Voltage type

General data

Number of poles	2
Protection degree	IP20
Colour	black orange

Downloads

Approval/Certificate/Document of Conformity	[EU_Konformitätserklärung / EU_Declaration_of_Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_86295)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_61295)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.1351370000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1351370000)
User Documentation	[Beipackzettel / Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_35434)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC000941
ETIM 7.0	EC000941
ETIM 8.0	EC000941
ETIM 9.0	EC000941
ECLASS 9.0	27-13-08-05
ECLASS 9.1	27-13-08-05
ECLASS 10.0	27-13-08-05
ECLASS 11.0	27-13-08-05
ECLASS 12.0	27-17-90-90
ECLASS 13.0	27-17-90-90
ECLASS 14.0	27-17-90-90

Tender specification sheets

Long specification

Multi-pole surge voltage arrestor according to the requirements of Class II acc. to IEC 50539-11. Consisting of V0 material, the arrestor serves as overvoltage protection and is used in applications according to IEC 50539-12. The use of a high-performance varistor meets the inspection requirements for Class II surge protection systems on the basis of the standards. The arrestor is installed in the vicinity of the equipment that needs protection, in a commercially available installation/electrical distribution enclosure. With thermal separation device on the varistor. If protection is no longer available, the colour in the display window changes from green to red. The functional state is also displayed by a voltage-free signalling contact (CO contact). Rated voltage: 600 VDC In/max (8/20 µs): 20/40 kA, protection level < 2.2 kV, telecommunication output: contact: 250 V/0.5 A 48 VDC/0.1 A, type: Weidmüller VPU II 2 R PV 600 V/40 kA, Order No. 1351370000 or equivalent

Short specification

Class II arrester with In/Imax: 20/40 kA suitable for PV systems. Protection level < 2.2 kV. With remote alert Type: Weidmüller VPU II 2 R PV 600 V/40 kA Order no. 1351370000 or equivalent

Approvals