TS 35X7.5/LL 2M/ST/ZN
Product image
Similar to illustration
TS 35X7.5/LL 2M/ST/ZN
Product image
Similar to illustration
TS 35X7.5/LL 2M/ST/ZN

TS 35X7.5/LL 2M/ST/ZN

Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm

Product ID 0514500000
Openen in configurator
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Toebehoren 22 Is accessoire van 128 Verwante producten 19
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Mounting rail Classifications

Approvals

ROHS
Conform 

General ordering data

Wersja
Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm 
Art.nr.
0514500000 
Тип
TS 35X7.5/LL 2M/ST/ZN 
GTIN (EAN)
4008190046019 
Qty.
40 

Dimensions and weights

Głębokość
7,5 mm
Depth (inches)
0,295 inch
Высота
35 mm
Height (inches)
1,378 inch
Ширина
2.000 mm
Width (inches)
78,74 inch
Net weight
15,75 g

Temperatures

Ambient temperature
-5 °C…40 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Mounting rail

Anchura de ranura
  • min.:
    5,2 mm
  • nominal:
    5,2 mm
  • max.:
    5,2 mm
Basic material
Steel 
Diamètre du trou de perçage
5,2 mm
Distanza intaglio
  • min.:
    11 mm
  • nominal:
    11 mm
  • max.:
    11 mm
Furattávolság a középtengelyek között
36 mm
Installation advice
Direct mounting 
Length of the terminal rail
  • min.:
    0 mm
  • nominal:
    2.000 mm
  • max.:
    2.000 mm
Mezera mezi drážkami
11 mm
Pre-punched mounting rail
Yes 
Schlitzbreite
5,2 mm
Short circuit strength corresponds to E-Cu wire
16 mm²
Short-time withstand current per second according to IEC 60947-7-2
1,92 kA
Slit length
25 mm
Slotted drill holes
Yes 
Solder eyelet hole diameter (D)
5,2 mm
Standards
DIN EN 60715 
Surface finish
galvanic zinc plated and passivated 
Thickness
1 mm
슬릿 길이
  • min.:
    25 mm
  • nominal:
    25 mm
  • max.:
    25 mm

Classifications

ETIM 8.0
EC001285 
ETIM 9.0
EC001285 
ETIM 10.0
EC001285 
ECLASS 14.0
27-40-06-02 
ECLASS 15.0
27-40-06-02