VPU AC II+III 2 R 440/20 S
VPU AC II+III 2 R 440/20 S
Electric symbol
Schematic circuit diagram

VPU AC II+III 2 R 440/20 S

Surge voltage arrester, Low voltage, with remote contact, Single-phase, TN-S

Product ID 2908450000
Openen in configurator
Gegevensblad downloaden Инженерная поддержка Загрузка продуктов
Toebehoren 2 Verwante producten 5
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Záruka Important note Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, with remote contact, Single-phase, TN-S 
Order No.
2908450000 
Type
VPU AC II+III 2 R 440/20 S 
GTIN (EAN)
4099986190658 
Qty.
1 items

Dimensions and weights

Depth
70 mm
Depth (inches)
2,756 inch
Height
105 mm
Height (inches)
4,134 inch
Width
18 mm
Width (inches)
0,709 inch
Net weight
165 g

Temperatures

Ambient temperature
-40 °C…85 °C 
Operating temperature
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Connection type
PUSH IN 
Cross-section for connected wire, solid core, max.
1,5 mm²
Cross-section for connected wire, solid core, min.
0,2 mm²
Max. torque
0,4 Nm
Stripping length
5 mm

General data

Colour
grey 
Design
Installation housing; 1TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 2000 m 
≤ 4000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 in installed state 
Segment
Power distribution 
UL 94 flammability rating
V-0 
Version
원격 접점 포함 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Rated data IEC / EN

Combined pulse UOC
6 kV
Discharge current (type III)
3 kA
Discharge current Imax (8/20µs) wire-PE
20 kA 
Frekvenciatartomány, min.
50 Hz
Frequency range, max.
60 Hz
Fuse protection
No Fuse neccessary ≤100 A gG 
Integrated back-up fuse
No 
klasa wymagań wg EN 61643-11
T2 
T3 
Klasa wymagań zgodnie z IEC 61643-11
Type II 
Type III 
Koordynacja energii (≤10 m)
Type II 
Type III 
Low voltage network
Single-phase 
TN-S 
maksymalne napięcie stałe, Uc (AC)
440 V 
Normy
IEC 61643-11 
EN 61643-11 
Number of poles
2 
Protection level Up at IN (L/N-PE)
≤ 1.7 kV 
Rated voltage (AC)
230 V
Short-circuit current rating ISCCR
25 kA
Signalling contact
250 V / 0,5 A 
Temporary surge voltage (over-voltage) - TOV
440 V
Tiempo de respuesta / tiempo de recuperación
≤ 25 ns 
Voltage type
Переменный ток 
Разрядный ток, Iн (8/20 мкс), провод – защ. заземление (PE)
10 kA 
Skyddsnivå upp vid IN (L-PE) (typ III)
≤1 kV 

Connection data

Conductor connection cross-section PE, solid, max.
35 mm²
Conductor connection cross-section PE, stranded, max.
35 mm²
Stripping length
13 mm
Wire connection method
Screw connection 
Type of connection
Screw connection 
Stripping length, rated connection
13 mm
Tightening torque, min.
1,2 Nm
Tightening torque, max.
2 Nm
Clamping range, rated connection
10 mm²
Clamping range, min.
2,5 mm²
Clamping range, max.
35 mm²
Wire cross-section, solid, min.
2,5 mm²
Wire cross-section, solid, max.
10 mm²
Průřez připojení vodičů, jemně stáčené, min.
2,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Connection cross-section, stranded, min.
2,5 mm²
결선 단면적, 꼬임, 최대
10 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
2 
Tipo de protección
IP20 en funcionamiento 
Colour
grey 

Záruka

Time interval
5 év 

Important note

Product information
For use in DC applications, please use the fuse of SIBA Type NH2XL aR/aSF DC 1500 V 

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-12-02 
ECLASS 15.0
27-17-12-02