ACT20M-AI-2AO-P
Product image
ACT20M-AI-2AO-P
Connection diagram
ACT20M-AI-2AO-P
Dimensioned drawing
ACT20M-AI-2AO-P
ACT20M-AI-2AO-P
ACT20M-AI-2AO-P

ACT20M-AI-2AO-P

Product not yet available, preliminary product data.

This product is not yet available.

Signal splitter, Configurable, with sensor supply, Input : I / U, Output : 2 x I/U

Item No. 2825350000
Download data sheet Engineering Support Product Downloads
Accessories 4 Related products 3
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input Output General data Insulation coordination Data for Ex applications (ATEX) Connection data EMC conformity and approvals Part description Classifications

General ordering data

Version
Signal splitter, Configurable, with sensor supply, Input : I / U, Output : 2 x I/U 
Order No.
2825350000 
Type
ACT20M-AI-2AO-P 
GTIN (EAN)
4064675361169 
Qty.
1 items

Dimensions and weights

Net weight
0 g

Temperatures

Storage temperature
-40 °C...85 °C 
Humidity
40 °C / 93 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Input resistance, current
70 Ω 
Number inputs
1 
Sensor supply
17…28 V DC (@ 20 mA) 
Voltage drop
<1,5 V 
Voltage drop, current input
<1.5 V 

Output

Cut-off frequency (-3 dB)
100 Hz 
Load impedance current
<300 Ω 
per channel 
@ max 23mA 
load impedance voltage
≥ 10 kΩ 
Number of outputs
2 
Output current
configurable 
0...20 mA 
4...20 mA 
Type
active 
connected control must be passive 

General data

Accuracy
<0.05 % of measuring range 
Configuration
DIP switch 
Mounting rail
TS 35 
Nominal power consumption
0.5 VA
Operating altitude
≤ 2000 m 
Power consumption, max.
1.2 W
Power consumption, typ.
0.84 W
Step response time
≤ 7 ms 
Supply voltage
24 V DC ± 30 % 

Insulation coordination

EMC standards
IEC 61326-1 
NE 21 
Insulation voltage
2.5 kVeff /1 min. 
Rated voltage
300 Veff 

Data for Ex applications (ATEX)

Installation location
Device installed in safe area, zone 2 
Marking
II 3 G Ex nA IIC T4 Gc 

Connection data

Type of connection
PUSH IN 
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.5 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 30 
Wire connection cross section AWG, max.
AWG 14 

EMC conformity and approvals

EMC standards
IEC 61326-1 
NE 21 

Part description

Product description
The configurable DC isolating amplifier ACT20M-AI-AO-S isolates and converts analogue standard signals. An analogue input signal is linearly converted into an analogue output signal and galvanically isolated. The input can also be operated as an active current loop (the loop current is supplied by the device). The power supply is galvanically isolated from the input and output (3-way isolation) by means of direct wiring or the Weidmüller rail bus.

The configurable DC isolation amplifier ACT20M-AI-2AO-S offers the same functionality, but has 2 galvanically isolated outputs (4-way isolation). 

Classifications

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20