PICOPAK-VI-2DO-E-P
PICOPAK-VI-2DO-E-P
PICOPAK-VI-2DO-E-P
PICOPAK-VI-2DO-E-P
PICOPAK-VI-2DO-E-P
PICOPAK-VI-2DO-E-P

PICOPAK-VI-2DO-E-P

Limit value monitoring

Item No. 2957060000
Download data sheet Engineering Support Product Downloads
Related products 2
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output (digital) General data Insulation coordination Connection data Part description Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80) 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULus)
E141197 

General ordering data

Version
Limit value monitoring 
Order No.
2957060000 
Type
PICOPAK-VI-2DO-E-P 
GTIN (EAN)
4099986741331 
Qty.
10 items

Dimensions and weights

Depth
62.5 mm
Depth (inches)
2.461 inch
Height
89.4 mm
Height (inches)
3.52 inch
Width
6.4 mm
Width (inches)
0.252 inch
Net weight
28 g

Temperatures

Storage temperature
-40 °C...85 °C 
Operating temperature
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 

Probability of failure

SIL in compliance with IEC 61508
None 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
6c, 7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
f814e8b7-24eb-4ad1-8545-4d3e652b59d1 

Input

Input measurement range
min. 1 % of full scale 
Input resistance, voltage
60 kΩ 
Input signal
Voltage source 
Input voltage
0...10 V 
0…1 V DC 
0…100 mV 
Number inputs
1 
Type
passive 

Output (digital)

Alarm function
High or low alarm 
Continuous current
100 mA 
Hysteresis
1% of adjusted final value 
Max. switching voltage, DC
30 V
Number of digital outputs
2 
Rated switching current
100 mA 
Type
Transistor, double switch output PNP 
Output polarity: configurable, 2x PNP output or 1x NPN / 1x PNP 

General data

Configuration
DIP switch and potentiometer 
Current consumption
25 mA 
Mounting rail
TS 35 
Power consumption
ca. 0.6 W 
Protection degree
IP20 
Status indicator
Error indication LED red; status LED green 
Voltage applied: LED green // output active: LED yellow 
Supply voltage
24 V AC 
24 V DC ± 20 % 
Temperature coefficient
± 250 ppm/K 

Insulation coordination

EMC standards
EN 61326-1 
EN 61000-6-4 
Galvanic isolation
Without isolation 
Pollution severity
2 

Connection data

Type of connection
PUSH IN 
Wire connection cross section AWG, min.
AWG 20 
AWG 12 
Wire connection cross section, finely stranded, min.
0.5 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²

Part description

Product description
The device is a limit switch for analogue standard signals from 0 to 10 V with two PNP transistor switching outputs. The threshold values for the two digital outputs are adjustable via potentiometers. The device is designed for use in industrial environments. The safety instructions and technical specifications described in this document must be observed (see “Technical data”). PicoPak VI-2DO-E Configuration The DIP switches are located on the side of the device. You can use the DIP switches to configure the desired measurement range and transistor switching outputs DO 1 and DO 2. 

Classifications

ETIM 6.0
EC002654 
ETIM 7.0
EC002654 
ETIM 8.0
EC002654 
ETIM 9.0
EC002654 
ETIM 10.0
EC002654 
ECLASS 9.0
27-21-01-22 
ECLASS 9.1
27-21-01-22 
ECLASS 10.0
27-21-01-22 
ECLASS 11.0
27-21-01-22 
ECLASS 12.0
27-21-01-22 
ECLASS 13.0
27-21-01-22 
ECLASS 14.0
27-21-01-22 
ECLASS 15.0
27-21-01-22