CH20M6 BP 4P-4P BUS RD LF 1 1261515
Product image
CH20M6 BP 4P-4P BUS RD LF 1 1261515
Product image
CH20M6 BP 4P-4P BUS RD LF 1 1261515
Product image
CH20M6 BP 4P-4P BUS RD LF 1 1261515
Product benefits
Base element including BUS cut-out
CH20M6 BP 4P-4P BUS RD LF 1 1261515
Dimensioned drawing

CH20M6 BP 4P-4P BUS RD LF 1 1261515

Modular housing, OMNIMATE Housing - series CH20M red, Housing base, Recess in detent foot area for BUS contact, Width: 6.1 mm

Product ID 2771410000
Openen in configurator
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Toebehoren 4 Contradelen 3 Verwante producten 3
Approvals General ordering data Dimensions and weights Environmental Product Compliance Material data General data Assembly properties Mechanical tests Właściwości komponentu Design - IN requirements Opzioni di personalizzazione Classifications

Approvals

ROHS
Conform 

General ordering data

Verze
Modular housing, OMNIMATE Housing - series CH20M red, Housing base, Recess in detent foot area for BUS contact, Width: 6.1 mm 
Číslo objednávky
2771410000 
Typ
CH20M6 BP 4P-4P BUS RD LF 1 1261515 
GTIN (EAN)
4064675032144 
Qty.
50 items

Dimensions and weights

Hloubka
114,3 mm
Depth (inches)
4,5 inch
Výška
110,7 mm
Height (inches)
4,358 inch
Šířka
6,1 mm
Width (inches)
0,24 inch
Net weight
2,3 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Material data

Basic material
Plastic 
Comparative Tracking Index (CTI)
400 ≤ CTI <600 
Insulating material
PBT 
Insulating material group
II 
Surface finish
untreated 
UL 94 flammability rating
V-0 

General data

Colour
red 
Colour chart (similar)
RAL 3020 
Encapsulation option
No 
Mounting rail
TS 35 
Protection degree
IP20 in installed state 

Assembly properties

PCB-k száma, max.
1 
Number of connection levels, max.
8 
Number of poles, max.
8 
Height of components on the PCB, max.
3,5 mm
Type of assembly of the PCB
one-sided 

Mechanical tests

Podle normy
DIN EN 61373:1999 (shock and vibration) 
Conditions du test
50g additional weight on the PCB 
with endbrackets WEW 35/1 (1059000000) 
four housings installed in a row 
Proved axles
X 
Y 
Z 
Control de impacto
  • General test advices:
    All mechanical tests were tested on examplary setup, or in view of depending regulation. The specified results do not replace approval relevant tests. They are just orientation values.
  • Test category:
    1
  • Number of shocks per axle:
    3 in positive and negative direction
  • Shock duration:
    30 ms
  • Acceleration horizontal:
    50 m/s²
  • Acceleration vertical:
    50 m/s²
  • Acceleration longitudinal:
    50 m/s²
Vibration test
  • Test category:
    1B
  • Test duration:
    5 hours per axle
  • Effective acceleration:
    7,9 m/s²

Właściwości komponentu

Anzahl Anschlussebenen max.
8 
Aussparung im Rastfußbereich als Vorbereitung für
Bus contact not included! 

Design - IN requirements

PCB thickness
0,8 mm
Tolerance for the PCB shape
±0.1 mm 
Tolerance of circuit board thickness
±0.1 mm 

Opzioni di personalizzazione

Alternitive colours
요청 시 추가 
Customer specific cutouts possible
Yes 
Customer specific labelling possible
Yes 
Customer specific order process
See guideline under downloads 

Classifications

ETIM 8.0
EC001031 
ETIM 9.0
EC001031 
ETIM 10.0
EC001031 
ECLASS 14.0
27-19-06-01 
ECLASS 15.0
27-19-06-01