FP PRO TOP3 48/10 2M
FP PRO TOP3 48/10 2M
FP PRO TOP3 48/10 2M
FP PRO TOP3 48/10 2M

FP PRO TOP3 48/10 2M

FieldPower® power supply unit, IP65, in complete state, 10A, 48 V, DC, PUSH IN

Tuotteen tunnus 2887620000
Lataa tietosivu Product Downloads
Lisävarusteet 31 Samankaltaiset tuotteet 6
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input Output General data Insulation coordination Input Output Classifications

Approvals

ROHS
Conform  

General ordering data

Version
FieldPower® power supply unit, IP65, in complete state, 10A, 48 V, DC, PUSH IN  
Order No.
2887620000  
Type
FP PRO TOP3 48/10 2M  
GTIN (EAN)
4064675859871  
Qty.
1  items

Dimensions and weights

Depth
220  mm
Depth (inches)
8,661  inch
Height
196  mm
Height (inches)
7,717  inch
Width
196  mm
Width (inches)
7,717  inch
Net weight
4 150  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-25 °C...45 °C  
Operating temperature range
-25...50 ℃  
Start-up
≥ -40 °C  
Humidity
35…85%, non condensing and non freezing  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
6c  
REACH SVHC
Lead 7439-92-1  
Potassium perfluorobutane sulfonate 29420-49-3  
SCIP
7645f3b1-6db9-495d-9e21-ab1d894aff05  

Input

AC current consumption
1,5 A @ 400 V DC / 2 A @ 320 V AC  
AC input voltage range
3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC  
DC input voltage range
450...800 V DC (max. 500 V DC acc. to UL508)  
Frequency range AC
45…65 Hz  
Input fuse (internal)
No  
Inrush current
Max. 10 A  
Recommended back-up fuse
3 - 5 A, Char C  
Surge protection
Varistor  
Wire connection method
PUSH IN  

Output

Adjustable rated current
No  
Nominal output current for Unom
10 A @ 60 °C  
Output current
10A  
Output power
480  W
Output voltage
48 V  
Output voltage type
DC  
Output voltage, max.
56  V
Output voltage, min.
45  V
Output voltage, note
(adjustable via potentiometer)  
Rated output voltage
48 V DC ± 1 %  
Surge protection
Varistor  
Switch-on delay
1 s  
Triggering characteristic
see characteristic curve  
Wire connection method
PUSH IN  

General data

Humidity
35…85%, non condensing and non freezing  
Installation advice
Lid screws included  
Protection degree
IP65  
in complete state  
Short-circuit protection
Yes  
internal  
Surge voltage category
III  
II  

Insulation coordination

Surge voltage category
III  
II  

Input

AC current consumption
1,5 A @ 400 V DC / 2 A @ 320 V AC  
AC input voltage range
3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC  
DC input voltage range
450...800 V DC (max. 500 V DC acc. to UL508)  
Frequency range AC
45…65 Hz  
Recommended back-up fuse
3 - 5 A, Char C  
Surge protection
Varistor  
Inrush current
Max. 10 A  
Input fuse (internal)
No  

Output

Adjustable rated current
No  
Output current
10A  
Output power
480  W
Output voltage
48 V  
Output voltage type
DC  
Output voltage, max.
56  V
Output voltage, min.
45  V
Output voltage, note
(adjustable via potentiometer)  
Switch-on delay
1 s  
Triggering characteristic
see characteristic curve  
Rated output voltage
48 V DC ± 1 %  
Nominal output current for Unom
10 A @ 60 °C  

Classifications

ETIM 6.0
EC002540  
ETIM 7.0
EC002540  
ETIM 8.0
EC002540  
ETIM 9.0
EC002540  
ETIM 10.0
EC002540  
ECLASS 9.1
27-04-07-01  
ECLASS 10.0
27-04-07-01  
ECLASS 11.0
27-04-07-01  
ECLASS 12.0
27-04-07-01  
ECLASS 13.0
27-04-90-02  
ECLASS 14.0
27-04-07-01  
ECLASS 15.0
27-04-07-01