MCZ R 48...110VDC 1CO TRAK
Product image
Similar to illustration
MCZ R 48...110VDC 1CO TRAK
Product image
Similar to illustration
MCZ R 48...110VDC 1CO TRAK
Wiring diagram
MCZ R 48...110VDC 1CO TRAK
Graph
DC load limit curve
MCZ R 48...110VDC 1CO TRAK
Graph
Derating curve
MCZ R 48...110VDC 1CO TRAK
Dimensional drawing

MCZ R 48...110VDC 1CO TRAK

Dette produkt er snart ikke længere tilgængeligt.

Dernière date de commande: /Date(1793314800000)/

Alternative product: 2774010000

MCZ-SERIES TRAK, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 48 V…110 V DC +25 % / -30 %, Continuous current: 6 A, Tension-clamp connection, Test button available: No

Produkt ID 8713910000
Åbn i konfiguratoren
Download datablad Engineering-support Produktdownloads
Tilbehør 18
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Connection data Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Versión
MCZ-SERIES TRAK, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 48 V…110 V DC +25 % / -30 %, Continuous current: 6 A, Tension-clamp connection, Test button available: No 
Order No.
8713910000 
Type
MCZ R 48...110VDC 1CO TRAK 
GTIN (EAN)
4032248390250 
Qty.
10 Styk
배송 상태
This article will no longer be available in the future. 
Dernière date de commande
/Date(1793314800000)/ 
Alternative product
[2774010000](~/p/2774010000) 

Dimensions and weights

Profundidad
63,2 mm
Depth (inches)
2,488 inch
Magasság
91 mm
Height (inches)
3,583 inch
Largeur
6,1 mm
Width (inches)
0,24 inch
Net weight
28 g

Temperatures

Temperatura di magazzinaggio
-40 °C...85 °C 
Ambient temperature
-25 °C…70 °C 
Humidité
95 % for 30 days, minimal condensation to EN 50155 
Note: room temperature (service)
+85 °C for 10 minutes 

Environmental Product Compliance

RoHS 対応状況
Compliant with exemption 
Esenzione RoHS (se applicabile/nota)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
35d83707-6a3b-45b5-b9f8-6ba8184c863e 

Control side

Märkstyrspänning
48 V…110 V DC +25 % / -30 % 
Rated current DC
<3 mA 
Power rating
<300 mW 
Status indicator
Green LED 
Protective circuit
Free-wheeling diode 
Varistor 
Reverse polarity protection 
Max. reset time after voltage interruption
10 ms

Load side

Rated switching voltage
250 V AC 
Continuous current
6 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
100 mA @ 12 V 
Inrush current
6 A 
AC switching capacity (resistive), max.
1500 VA 
DC switching capacity (resistive), max.
120 W @ 24 V 
Switch-on delay
<4 ms 
Switch-off delay
<100 ms 
Contact type
1 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

General data

Version
for railway applications 
Mounting rail
TS 35 
Testknapp finns
No 
Mechanical switch position indicator
No 
Open sides
right 
Colour
beige 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-0

Insulation coordination

정격 전압
300 V
Stopień zanieczyszczenia
2 
Surge voltage category
III 
제어 측면 - 부하 측면에 대한 기중 거리 및 연면 거리
≥ 5.5 mm 
Dielectric strength for control side - load side
4 kVeff / 1 s 
Dielectric strength to mounting rail
4 kVeff / 1 Min. 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Protection degree
IP20 

Connection data

Wire connection method
Tension-clamp connection 
Abisolierlänge Bemessungsanschluss
8 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
1,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire cross-section, solid, min. (AWG)
AWG 26 
Wire cross-section, solid, max. (AWG)
AWG 16 
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26 
Wire cross-section, finely stranded, max. (AWG)
AWG 16 
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Twin wire-end ferrules, max.
1 mm²
Blade size
0.6 x 3.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01