ACT20-FEED-IN-PRO-S
Product image
.
ACT20-FEED-IN-PRO-S
ACT20-FEED-IN-PRO-S
Connection diagram
ACT20-FEED-IN-PRO-S
Dimensioned drawing
dimensions
ACT20-FEED-IN-PRO-S
ACT20-FEED-IN-PRO-S

ACT20-FEED-IN-PRO-S

Supply module, Distributes supply voltage to rail bus, Optional connection of backup supply

ID výrobku 8965500000
Otevřít v konfigurátoru
Stáhnout datový list Engineering-support Produktdownloads
Tilbehør 4 Er tilbehør til 2 Anvendte produkter 3
승인 General ordering data 치수 및 중량 온도 Prawdopodobieństwo usterki 환경 제품 규정 준수 Input Output Output (digital) General data Insulation coordination Размеры Part description Klassificeringar

승인

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/0d1637a4-c7dd-4915-8bc8-4c9de8d8b393/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/2fb608f0-c73d-4515-a7a5-878046a505f4/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/33adcb9c-2865-4cbb-8057-1da77b87f940/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/52b59257-358c-4bc4-9ea4-df407cebf157/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULus)
E337701 

General ordering data

Version
Supply module, Distributes supply voltage to rail bus, Optional connection of backup supply 
Order No.
8965500000 
Type
ACT20-FEED-IN-PRO-S 
GTIN (EAN)
4032248785117 
Qty.
1 Styk

치수 및 중량

Depth
113,6 mm
Depth (inches)
4,472 inch
Height
117,2 mm
Bygghöjd (tum)
4,614 inch
Width
22,5 mm
Width (inches)
0,886 inch
Net weight
140 g

온도

Storage temperature
-20 °C...85 °C 
Ambient temperature
-20 °C…60 °C 
Humidity
40 °C / 95 % rel. humidity, no condensation 

Prawdopodobieństwo usterki

SIL in compliance with IEC 61508
Нет 

환경 제품 규정 준수

RoHS Compliance Status
준수, 예외 존재 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Backup power supply
21.6...26.4 V DC 
Input current
max. 4 A 
Input voltage
21.6…26.4 V DC 
Number inputs
2 
Supply voltage (input)
21.6...26.4 V DC 
Trigger level for the power supply
Hiba <21 V DC 

Output

Number of outputs
1 
Output current
Equivalent to input current 
max. 4 A 
Output power
96 W
Output voltage, note
Input voltage -0.5 V DC / 4 A 
Supply voltage (output)
24 V DC 

Output (digital)

AC power, max.
500 VA / 60 W 
Alarm function
Device error 
Failure of power supply 
backup power supply 
Continuous current
2 A 
Max. switching voltage, AC
250 V
Type
Relé, 1 contatto di scambio 

General data

Configuration
none 
Mounting rail
TS 35 
CH20M Bus 
Power consumption
<2 W 
Power consumption, max.
1 W
Protection degree
IP20 
Supply voltage
21.6...26.4 V DC 

Insulation coordination

EMC standards
EN 61326-1 

Размеры

Type of connection
Винтовое соединение 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 30 
Wire connection cross section AWG, max.
AWG 14 

Part description

Product description
The power-feed unit ACT20-FEED-IN-PRO-S distributes the supply voltage for the ACT20 range of devices to the Weidmüller CH20M DIN rail bus. The device also has a connection for a backup power supply. Installation is basically on the Weidmüller CH20M DIN rail bus.

Properties
  • The power-feed unit ACT20-FEED-IN-PRO-S detects errors on each of the devices mounted on the Weidmüller CH20M DIN rail and sends a collective message to an external controller via the internal status relay.
  • Two power supplies for the primary and secondary supply (backup) can be optionally connected.
  • A redundant power supply can be set up using two power-feed units and two separate power supplies.
  • The status relay is activated when the following conditions are met: ◊ The supply voltage is on the connection terminals 51 and 52 ◊ The backup supply voltage is on the terminals 53 and 54. If the backup power supply is not required, the supplied jumper needs to be inserted between terminals 52 and 53. ◊ The devices mounted on the Weidmüller DIN rail do not report any errors
  • The device can be used in safe (non-explosive risk) areas or in Zone 2 / Division 2.
  • The operating status of the power supply and the backup power supply is indicated with two green LEDs.
  • A malfunction is indicated with a red LED.
 

Klassificeringar

ETIM 8.0
EC001600 
ETIM 9.0
EC001600 
ETIM 10.0
EC001600 
ECLASS 14.0
27-24-26-10 
ECLASS 15.0
27-24-26-10