DRH275048LT
D-SERIES DRW / DRH, Relay 1 NO contact and 1 NC contact with blow-out magnet AgSnO, Rated control voltage: 48 V DC, Continuous current: 16 A, Flat blade connections (4.8 mm x 0.5 mm), Test button available: Yes
Tuotteen tunnus
1220060000
Ominaisuudet
| Version | D-SERIES DRW / DRH, Relay 1 NO contact and 1 NC contact with blow-out magnet AgSnO, Rated control voltage: 48 V DC, Continuous current: 16 A, Flat blade connections (4.8 mm x 0.5 mm), Test button available: Yes |
| Order No. | 1220060000 |
| Type | DRH275048LT |
| GTIN (EAN) | 4032248998531 |
| Qty. | 10 items |
| Depth | 48 mm |
| Depth (inches) | 1,89 inch |
| Height | 36 mm |
| Height (inches) | 1,417 inch |
| Width | 36 mm |
| Width (inches) | 1,417 inch |
| Net weight | 85,3 g |
| Storage temperature | -40 °C...60 °C |
| Operating temperature | -40 °C...60 °C |
| Humidity | 5...85 % rel. humidity, no condensation |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Certificate No. (cURus) | E312083 |
| Rated control voltage | 48 V DC |
| Rated current DC | 30 mA |
| Power rating | 1.5 W |
| Coil resistance | 1600 Ω ± 10 % |
| Status indicator | Green LED |
| Rated switching voltage | 250 V AC |
| Continuous current | 16 A |
| Max. switching frequency at rated load | 0,1 Hz |
| Max. switching voltage, AC | 400 V |
| Max. switching voltage, DC | 300 V |
| Min. switching power | 100 mA @ 12 V |
| Inrush current | 80 A / 50 ms |
| AC switching capacity (resistive), max. | 4000 VA |
| DC switching capacity (resistive), max. | 660 W @ 220 V |
| Switch-on delay | < 20 ms |
| Switch-off delay | < 20 ms |
| Contact type | 1 NO contact and 1 NC contact with blow-out magnet (AgSnO) |
| Mechanical service life | 10 x 106 switching cycles |
| Test button available | Yes |
| Version of test button |
Lockable test button
Momentary test button |
| Mechanical switch position indicator | Yes |
| Colour | Transparent |
| UL94 flammability rating component |
|
| Insulation coordination according to | EN 61810-1:2008 |
| Rated voltage | 400 V |
| Pollution severity | 3 |
| Surge voltage category | III |
| Insulating material group | IIIa |
| Clearance and creepage distances for control side - load side | ≥ 6,3 mm |
| Dielectric strength for control side - load side | 4 kVeff / 1 min |
| Dielectric strength of neighbouring contacts | 4 kVeff / 1 min |
| Dielectric strength of open contact | 4 kVeff / 1 min |
| Protection degree | IP20 |
| Certificate No. (cURus) | E312083 |
| Wire connection method | Flat blade connections (4.8 mm x 0.5 mm) |
| Approval/Certificate/Document of Conformity | [EU Konformitätserklärung / EU Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_35366) |
| Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_49123) |
| Eplan Data Portal | [Eplan data](https://dataportal.eplan.com/part-details/WEI.1220060000) |
| CADENAS eCATALOG | [CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1220060000) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC001437 |
| ETIM 7.0 | EC001437 |
| ETIM 8.0 | EC001437 |
| ETIM 9.0 | EC001437 |
| ECLASS 9.0 | 27-37-16-01 |
| ECLASS 9.1 | 27-37-16-01 |
| ECLASS 10.0 | 27-37-16-01 |
| ECLASS 11.0 | 27-37-16-01 |
| ECLASS 12.0 | 27-37-16-01 |
| ECLASS 13.0 | 27-37-16-01 |
| ECLASS 14.0 | 27-37-16-01 |
| Approvals |  |
| ROHS | Conform |
| UL File Number Search | [UL Website](LINK/UL_search.html) |
| Certificate No. (cURus) | E312083 |