DRIKIT 115VAC 2CO LD
Product image
Similar to illustration
DRIKIT 115VAC 2CO LD
Wiring diagram
DRIKIT 115VAC 2CO LD
Graph
DC load limit curve
Resistive load
DRIKIT 115VAC 2CO LD
Graph
Electrical service life
DRIKIT 115VAC 2CO LD
Graph
AC operational voltage range
DRIKIT 115VAC 2CO LD
Dimensional drawing
DRIKIT 115VAC 2CO LD
Miscellaneous
Type codes

DRIKIT 115VAC 2CO LD

D-SERIES DRI, Modulo a relè, Numero di contatti: 2, Contatto di scambio AgSnO, Tensione nominale: 115 V AC, Corrente permanente: 5 A, Collegamento a vite, Tasto di prova disponibile: No

№ продукта 2476860000
Открыть в конфигураторе
Загрузить спецификации Engineeringondersteuning Productdownloads
Akcesoria 11 Pojedyncze części 3 Produkty pokrewne 14
Agréments Általános rendelési adatok Dimensions et poids Hőmérsékletek Termékek környezetvédelmi megfelelősége Côté commande Сторона нагрузки Allmänna uppgifter Isolationskoordinater Further details of approvals / standards Dati di collegamento Classifications

Agréments

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

Általános rendelési adatok

Version
D-SERIES DRI, Modulo a relè, Numero di contatti: 2, Contatto di scambio AgSnO, Tensione nominale: 115 V AC, Corrente permanente: 5 A, Collegamento a vite, Tasto di prova disponibile: No 
Order No.
2476860000 
Type
DRIKIT 115VAC 2CO LD 
GTIN (EAN)
4050118497083 
Qty.
10 adet

Dimensions et poids

Depth
67,7 mm
깊이 (인치)
2,665 inch
Height
80,2 mm
Height (inches)
3,157 inch
Width
15,8 mm
Width (inches)
0,622 inch
Net weight
64 g

Hőmérsékletek

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Termékek környezetvédelmi megfelelősége

RoHS Compliance Status
Conforme sans exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Côté commande

Rated control voltage
115 V AC 
Rated current AC
9.3 mA 
Power rating
1.1 VA 
Coil resistance
6200 Ω ± 10 % 
Status indicator
red LED 

Сторона нагрузки

Rated switching voltage
250 V AC 
Continuous current
5 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
1250 VA 
DC switching capacity (resistive), max.
150 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
2 CO contact (AgSnO) 
Mechanische Lebensdauer
10 x 106 switching cycles 

Allmänna uppgifter

Mounting rail
TS 35 
Test button available
No 
Mechanical switch position indicator
No 
Colour
black 
Komponent s klasifikací hořlavosti UL 94
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0

Isolationskoordinater

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
IIIb 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
4 kVeff / 1 min 
Dielectric strength of neighbouring contacts
1.5 kVeff /1 min. 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E355547 

Dati di collegamento

Wire connection method
스크류 결선 
Stripping length, rated connection
8 mm
Tightening torque, min.
0,5 Nm
Tightening torque, max.
0,8 Nm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,25 mm²
Clamping range, max.
4 mm²
Wire cross-section, solid, min.
0,25 mm²
Wire cross-section, solid, max.
4 mm²
Wire connection cross section, finely stranded, min.
0,25 mm²
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4 mm²
Blade size
size PH1 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01