PVC DC 2I 2O 10MPP SPD1R EVO 11

• Wire connection:

  • Type of connection:

    Stäubli MC4-Evo 2 connector

  • Wire cross-section, min.:

    2,5 mm²

  • Wire cross-section, max.:

    6 mm²

• Cable entry:

  • Number of cable entries:

    4

• Cable entry:

  • Number of cable entries:

    1

• Wire connection:

  • Type of connection:

    Tension clamp connection with actuator

  • Flexible, max. H05(07) V-K:

    1,5 mm²

  • w. wire end ferrule, DIN 46228 pt 1, max.:

    1,5 mm²

• Cable entry:

  • Number of cable entries:

    1

• Wire connection:

  • Type of connection:

    Tension clamp connection with actuator

  • Flexible, max. H05(07) V-K:

    1,5 mm²

  • w. wire end ferrule, DIN 46228 pt 1, max.:

    1,5 mm²

• Wire connection:

  • Type of connection:

    Stäubli MC4-Evo 2 connector

  • Compatible cable crossection:

    TÜV 2 Pfg1169/08.07

  • Wire cross-section, min.:

    2,5 mm²

  • Wire cross-section, max.:

    6 mm²

Combiner box for inverters with 10 MPP tracker, suitable for protecting the DC side of a photovoltaic system according to EN 51543-32.

MPP1:
2 inputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
2 outputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

MPP2 to 10:
identical to MPP1

Max. string voltage Uoc: 1100V
1 class/type I + II combined arrester with signal contact
Connection of the signal contact via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm²
Connection of the functional earth via cable glands (8-12mmØ) Conductor cross-section: 16-25mm²
Protection class: IP65
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 469.5x600x248.9 mm

Approval according to low voltage switchgear and controlgear IEC 61439-1:2011 and EN 61439-2:2011