VSSC4 GDT 240VUC 2X10KA
VSSC4 GDT 240VUC 2X10KA
VSSC4 GDT 240VUC 2X10KA

VSSC4 GDT 240VUC 2X10KA

Surge protection for instrumentation and control, Surge protection for measurement and control, UP(L/N-PE) < 1300 V

Tuotteen tunnus 1307880000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 2 Samankaltaiset tuotteet 5
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance CSA protection data General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Further details of approvals Connection data Electrical data General data Ratings IECEx/ATEX/cUL Important note Product images Classifications Tender specification sheets

Approvals

ROHS
Conform  

General ordering data

Version
Surge protection for instrumentation and control, Surge protection for measurement and control, UP(L/N-PE) < 1300 V  
Order No.
1307880000  
Type
VSSC4 GDT 240VUC 2X10KA  
GTIN (EAN)
4050118146431  
Qty.
5  items

Dimensions and weights

Depth
58,5  mm
Depth (inches)
2,303  inch
Height
76  mm
Height (inches)
2,992  inch
Width
6,2  mm
Width (inches)
0,244  inch
Net weight
32,5  g

Temperatures

Storage temperature
-40 °C...80 °C  
Operating temperature
-40 °C...70 °C  
Humidity
5...96 %  

Probability of failure

SIL in compliance with IEC 61508
3  
MTTF
11 416  a
SFF
100  %
λges
10  
PFH in 1*10-9 per hour
0  

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

CSA protection data

Gas group C
IIB  
Gas group D
IIA  
Gas groups A, B
IIC  
Input voltage, max. Ui
407  V
Internal capacity, max. CI
0 nF  
Internal inductance, max. LI
0 µH  

General data

Colour
black  
Design
Terminal  
Isolating function
No  
Optical function display
No  
Protection degree
IP20  
Rail
TS 35  
Segment
Measurement - Monitoring - Setting  
UL 94 flammability rating
V-0  
Version
Surge protection for measurement and control  

Insulation coordination acc. to EN 50178

Pollution severity
2  
Surge voltage category
III  

Rated data IEC / EN

Capacitance
4.65 pF  
Discharge current Imax (8/20µs) wire-PE
2 x 10 kA  
Discharge current In (8/20µs) wire-PE
5 kA  
Lightning test current Iimp (10/350 µs)
2.5 kA  
Lightning test current, Iimp (10/350 µs) Wire-PE
2.5 kA  
Max. continuous voltage, Uc (AC)
288 V  
Max. continuous voltage, Uc (DC)
407 V  
Number of poles
1  
Overload - failure mode
Modus 2  
Protection level UP (typ.)
< 1300 V  
Pulse-reset capacity
≤ 20 ms  
Rated current IN
20  A
Rated voltage (AC)
240  V
Rated voltage (DC)
339 V  
Requirements category acc. to IEC 61643-21
C2  
C3  
D1  
Standards
IEC 61643-21  
Surge current-carrying capacity C2
5 kA 8/20 μs  
Surge current-carrying capacity C3
100 A 10/1000 μs  
Surge current-carrying capacity D1
2.5 kA 10/350 μs  
Voltage type
AC/DC  
Volume resistance
<0.1 Ω  

Further details of approvals

GOST certificate
[GOST-Zertifikat](PDF/7950_n1-n4.pdf)  

Connection data

Stripping length
10  mm
Type of connection
Screw connection  
Tightening torque, min.
0,5  Nm
Tightening torque, max.
0,8  Nm
Clamping range, min.
0,5  mm²
Clamping range, max.
4  mm²
Wire cross-section, solid, min.
0,5  mm²
Wire cross-section, solid, max.
6  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4  mm²
Connection cross-section, stranded, min.
0,5  mm²
Connection cross-section, stranded, max.
4  mm²

Electrical data

Voltage type
AC/DC  

General data

Number of poles
1  
Protection degree
IP20  
Colour
black  

Ratings IECEx/ATEX/cUL

cUL certificate
[cUL Certificate](pdf/VSSC.PDF)  

Important note

Product information
Mode 2: State where the voltage-limiting part of the SPD was short-circuited due to a very low impedance within the SPD. The line is inoperable, but the measuring equipment is still protected by means of a short-circuit.  

Product images

Classifications

ETIM 7.0
EC000943  
ETIM 8.0
EC000943  
ETIM 9.0
EC000943  
ETIM 10.0
EC000943  
ECLASS 12.0
27-17-15-01  
ECLASS 13.0
27-17-15-01  
ECLASS 14.0
27-17-15-01  
ECLASS 15.0
27-17-15-01  

Tender specification sheets

Long specification
Feed-through terminal, 12.4mm wide with gas-filled surge voltage arrester between the signal line connection and the mounting rail potential, TS 35 contact base.A signal with max. 32A can be protected here. When the terminal is fitted, a simultaneous electrically conducting contact is made between the mounting rail (earth) and the reference potential (ground) of the protection circuit in the terminal. Optical identification of the terminal based on the type of protected switching and the voltage level. The terminal can be labelled or marked.  
Short specification
Feed-through terminal with gas-filled surge voltage arrester between the signal line connection and the mounting rail potential, TS 35 contact base. Version: 24V AC