WF 6 NFF
Product image
WF 6 NFF

WF 6 NFF

Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 35 mm², Threaded stud connection

Tuotteen tunnus 1969000000
Avaa konfiguraattorissa
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 17 Samankaltaiset tuotteet 1077
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Material data System specifications Additional technical data Conductors for clamping (rated connection) Dimensions General Rating data Classifications

Approvals

Dopuszczenia
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Versión
Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 35 mm², Threaded stud connection 
Código
1969000000 
Type
WF 6 NFF 
GTIN (EAN)
4032248726608 
Qty.
25 items

Dimensions and weights

Profundidad
54,5 mm
Depth (inches)
2,146 inch
Height
67 mm
Height (inches)
2,638 inch
Largeur
17,8 mm
Width (inches)
0,701 inch
Net weight
29,76 g

Temperatures

Lagertemperatur
-25 °C...55 °C 
Omgivningstemperatur
-5 °C…40 °C 
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C

Environmental Product Compliance

RoHS-kompatibilitetsstatus
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Material data

Basic material
Wemid 
Colour
dark beige 
UL 94 flammability rating
V-0 

System specifications

Version
Single-stud terminals 
End cover plate required
No 
Number of potentials
1 
Number of levels
1 
Number of clamping points per level
1 
Levels cross-connected internally
No 
PE connection
No 
Mounting rail
TS 35 

Additional technical data

Explosion-tested version
No 
Number of similar terminals
1 
Open sides
Open 
Type of mounting
Snap-on 

Conductors for clamping (rated connection)

35 mm²
2 x cable lugs DIN 46 234
2.5 to 35 mm² 
2 x cable lugs DIN 46 235
6...25 mm² 
Cable lug to DIN 46235
6...35 mm² 
Clamping range, min.
2,5 mm²
Connection cross-section, finely stranded, min.
2,5 mm²
Connection cross-section, stranded, max.
35 mm²
Connection cross-section, stranded, min.
2,5 mm²
Connection direction
on side 
Kabelskor DIN 46 234
2.5...35 mm² 
Number of connections
1 
Stud size for spade connection
M 6 
Tightening torque, max.
7 Nm
Tightening torque, min.
5,8 Nm
Type of connection
Threaded stud connection 
Wire connection cross section AWG, max.
AWG 2 
Wire connection cross section AWG, min.
AWG 12 
Wire connection cross section, finely stranded, max.
35 mm²
Wire connection cross section, finely stranded, min.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
2,5 mm²
Wire connection cross-section, solid core, max.
35 mm²
Wire connection cross-section, solid core, min.
2,5 mm²

Dimensions

TS 35 offset
31,5 mm

General

Ledardiameter, AWG, max
AWG 2 
Ledardiameter, AWG, min.
AWG 12 
Montageskena obestyckad
TS 35 
Normer
IEC 60947-7-1 

Rating data

Rated cross-section
35 mm²
Rated voltage
1.000 V
Rated DC voltage
1.000 V
Voltage with epoxy resin partition plate
2.300 V
Nominal current
125 A
Current at maximum wires
125 A
Standards
IEC 60947-7-1 
Volume resistance according to IEC 60947-7-x
0,26 mΩ
Rated impulse withstand voltage
8 kV 
Impulse voltage with epoxy resin partition plate
12 kV
Power loss in accordance with IEC 60947-7-x
4 W
Pollution severity
3 

Classifications

ETIM 8.0
EC000897 
ETIM 9.0
EC000897 
ETIM 10.0
EC000897 
ECLASS 14.0
27-25-01-01 
ECLASS 15.0
27-25-01-01