ACT20M-UI-AO-P
Product image
ACT20M-UI-AO-P
Dimensioned drawing
ACT20M-UI-AO-P
ACT20M-UI-AO-P
ACT20M-UI-AO-P
ACT20M-UI-AO-P
ACT20M-UI-AO-P
Connection diagram

ACT20M-UI-AO-P

Výrobek dosud není k dispozici, předběžné údaje výrobku.

Tento produkt ještě není k dispozici.

Temperature converter, Input : universal U, I, R,ϑ, Output : I / U

Item No. 2825440000
Download data sheet Mühendislik desteği Dokumenty ke stažení
Zubehör 4 Verwandte Artikel 1
General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output General data Insulation coordination Data for Ex applications (ATEX) Connection data EMC conformity and approvals Part description Classifications

General ordering data

Version
Temperature converter, Input : universal U, I, R,ϑ, Output : I / U 
Order No.
2825440000 
Typ
ACT20M-UI-AO-P 
GTIN (EAN)
4064675361251 
Qty.
1 adet

Dimensions and weights

Net weight
0 g

Temperatures

Storage temperature
-40 °C...85 °C 
Humidity
40 °C / 93 % rel. humidity, no condensation 

Probability of failure

SIL in compliance with IEC 61508
None 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
Výjimka ze směrnice RoHS (je-li použitelné/známo)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Corriente de entrada
configurable 
0...20 mA 
4…20mA 
Feszültségesés, árambemenet
<3 V 
Input resistance, voltage
> 10 MΩ 
Number inputs
1 
Potentiometer
10…100 kΩ 
Sensor
Thermocouples: B / C / E / J / K / L / N / R / S / T / W3 / W5
- 200...+ 2300 °C depending on thermocouple 
RTD: PT10, PT20, PT50, PT100, PT250, PT300, PT400, PT500, PT1000, Ni50, Ni100, Ni120, Ni1000 
2-/3-/4-wire 
Sensor supply
> 15 V DC at 20 mA 
Temperatur-Eingangsbereich
Configurable 
min. measurement range 10°C (RTD) 
N: (-180…+1300 °C) 
R: (-50…+1760 °C) 
S: (-50…+1760 °C) 
T: (-200…+400 °C) 
U: (-200…+600 °C) 
W3: (0…+2300 °C) 
W5: (0…+2300 °C) 
LR: (-200…+800 °C) 
Details under Downloads "Measuring range Table ACT20M-UI-AO" 
min. measurement range 50°C (TC) 
PT100: -200°C…850 °C 
NI100: -60°C…+250 °C 
TC type: B (0…+1820 °C) 
E: (-100…+1000 °C) 
J: (-100…+1200 °C) 
K: (-180…+1372 °C) 
L: (-200…+900 °C) 
Vstupní napětí
configurable 
0(2)…10 V 
0(1)…5 V 
0…1 V DC 
0,2…1 V DC 
Widerstand
0…10 kΩ 

Output

Cut-off frequency (-3 dB)
100 Hz 
Load impedance current
≤ 600 Ω 
@ max 28mA 
<600 Ω 
load impedance voltage
≥ 10 kΩ 
Number of outputs
1 
Output current
configurable 
0...20 mA 
4...20 mA 
20…0 mA 
20…4 mA 
downscale (3,5 mA) 
upscale (23 mA) 
in case of sensor error 
Output voltage, note
configurable 
0(2)...10 V 
0(1)...5 V 
0(0,2)…1 V 
5…(1)0 V 
10…(2)0 V 
downscale (0 V) 
upscale (11 V) 
in case of sensor error 
Type
active 
connected control must be passive 
Wire break detection
Yes, if using RTD / POT / TC 

General data

Coefficient de température
≤ 0.01 % / °C 
Konfiguráció
With FDT/DTM software 
Requires configuration adapter 8978580000 CBX200 USB 
Mounting rail
TS 35 
Potenza assorbita nominale
1,2 VA
Power consumption, typ.
0,84 W
Protection degree
IP20 
Sprungantwortzeit
400 ms (10...90%) @ U/I 
1 s @ temp 
Strömförbrukning, max.
1,2 W
Versorgungsspannung
24 V DC ±30 % at terminal or via CH20M rail bus 
Точность
<0.1 % of measuring range 
작동 고도
≤ 2000 m 

Insulation coordination

Classe di sovratensione
II 
Grado di lordura
2 
Insulation voltage
2.5 kVeff /1 min. 
napięcie nominalne
300 Veff 
Norme EMC
IEC 61326-1 
NE 21 
Separazione galvanica
3-way isolator 

Data for Ex applications (ATEX)

Installation location
Device installed in safe area, zone 2 
Marking
II 3 G Ex nA IIC T4 Gc 

Connection data

Type of connection
PUSH IN 
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 30 
Wire connection cross section AWG, max.
AWG 14 

EMC conformity and approvals

EMC standards
IEC 61326-1 
NE 21 

Part description

Product description
The software configurable Universal Transmitter ACT20M-UI-AO-S separates and converts standard analogue signals. An analogue input signal (voltage, current, resistance, potentiometer, RTD, TC) is converted linear and galvanic isolated into an analogue output signal. The input may also operate as an active current loop (the loop current provided by the device). The power supply is galvanically isolated from input and output and happens via a direct wiring or the Weidmüller DIN Rail Bus (3-way isolation). 

Classifications

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20