ACT20P-UI-2RCO-AC-S
Product image
ACT20P-UI-2RCO-AC-S
ACT20P-UI-2RCO-AC-S
Dimensioned drawing
ACT20P-UI-2RCO-AC-S
Similar to illustration
ACT20P-UI-2RCO-AC-S
ACT20P-UI-2RCO-AC-S
ACT20P-UI-2RCO-AC-S

ACT20P-UI-2RCO-AC-S

Limit value monitoring, Input : universal U, I, R,ϑ, Output : 2 x relays, 90…264 V AC power supply

Cikkszám 1238910000
Nyissa meg a konfigurátorban
Adatlap letöltése Mérnöki támogatás Szoftvertámogatás Termékletöltések
Tartozékok 3 Készlet tartalma 1 Kapcsolódó termékek 10
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output 출력(디지털) Indicazioni generali Insulation coordination Connection data Part description Classifications Tender specification sheets

Approvals

Godkännanden
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/4a92d911-d582-40e3-85fc-c9e9b159e140/DAP_Master_ICON,w_80,q_80) 
Godkännanden
CULUS; 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULusEX)
E338066 

General ordering data

버전
Limit value monitoring, Input : universal U, I, R,ϑ, Output : 2 x relays, 90…264 V AC power supply 
Nr zam.
1238910000 
Type
ACT20P-UI-2RCO-AC-S 
GTIN (EAN)
4050118027075 
Qty.
1 adet

Dimensions and weights

깊이
113,6 mm
Depth (inches)
4,472 inch
높이
119,2 mm
Height (inches)
4,693 inch
Bredd
22,5 mm
Width (inches)
0,886 inch
Net weight
345,685 g

Temperatures

Storage temperature
-20 °C...70 °C 
Operating temperature
-20 °C...60 °C 
Humidity
10…90 %, no condensation 

Probability of failure

SIL v souladu s IEC 61508
None 
MTBF
180 a

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Cable-length compensation
<±0.002 Ω per cable resistance Ω 
Influence of the sensor cable resistance
5 Ω @ RTD- Kabel 
Input current
configurable 
± 25 mA DC 
±5 A DC 
Input resistance, current
40 Ω 
Input resistance, voltage
2 MΩ 
> 10 MΩ 
Input voltage
configurable 
±150 mV DC 
± 600mV DC 
±30 V DC 
±300 V DC 
Number inputs
1 
Potentiometer
1.2…500 kΩ 
Resistance
0…10 kΩ 
0…12 kΩ 
0…15 kΩ 
Sensor
RTD (2,3-wire): Pt100, Pt200, Pt1000, Ni120, Cu10 
Thermocouples: B, E, J, K, L, N, R, S, T,U 
Sensor supply
0.1 mA / 0.05 mA (depending on measuring range) @ RTD cable 
24 V (@ 4-20 mA loop) 
Temperature input range
B: +100…+1820 °C 
E: -270…+1000 °C 
J: (-210…+1200 °C) 
K: -270…+1372 °C 
L: +100…+900 °C 
N: (-180…+1300 °C) 
R: -50…+1768 °C 
S: -50…+1768 °C 
T: -270…+400 °C 
U: -200…+600 °C 

Output

Number of outputs
2 

출력(디지털)

Alarm function
konfigurowalne 
Wartości graniczne górna i dolna, zakres okna 
Opóźnienie alarmu: 0…99 s 
Regulowana histereza 
auto / manual reset 
Number of digital outputs
2 
Rated switching current
200mA @ 110Vdc 
6A @ 24Vdc / 240Vac 
Tensión de conex. AC, max.
250 V
Tensión de conex. DC, max.
110 V
Tipo
2 CO contacts 
normal / inverse adjustment 
Switching frequency 20 Hz 

Indicazioni generali

Accuracy
측정 범위의 <0.1 % 
Cold-junction compensation error
±2.0°C @ -20° C - 70°C 
Konfigurace
With FDT/DTM software 
or via 7-segment display, push-buttons and rotary encoder on the device itself 
Requires configuration adapter 8978580000 CBX200 USB 
Long-term drift
0.1 % / 10.000 h 
Mounting rail
TS 35 
Nominal power consumption
1,5 VA
Operating altitude
≤ 2000 m 
Power consumption
≤ 3.5 W 
<2 W 
Protection degree
IP20 
Repeat accuracy
± 0.05 % of measuring range final value 
Step response time
450 ms 
Supply voltage
90…264 V AC 
Temperature coefficient
<0.02 °C of measuring range / °C 
350 ppm/K 

Insulation coordination

EMC standards
EN 61326-1 
Galvanic isolation
between input ⁄ output ⁄ supply ⁄ relay 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Insulation voltage
4 kV (input / output) 
Pollution severity
2 
Rated voltage
300 Veff 
Surge voltage category
III 
Test voltage
0,3 kV

Connection data

Anschlussart
Screw connection 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 12 

Part description

Description du produit
The devices of the ACT20P-UI-2RCO-XX-x family record current, voltage, potentiometer and temperature sensor signals (mA, A, mV, V, potentiometer, RTD and TC). They have two independent relay outputs which emit an alarm when levels exceed or fall below pre-set limits.

Properties

  • Configuration and diagnosis with the FDT/DTM software “WI-Manager”.
  • Manual configuration on the device is performed via the LED display by means of operating buttons and rotary encoders.
  • The dual-channel trip amplifier enables various alarm functions: window alarm, alarm delay, wire break detection, hysteresis and upper / lower limit alarm.
  • The active or passive signal inputs for RTD, TC, potentiometer, voltage and current are fully galvanically isolated.
  • Remote diagnosis: reporting of errors (e.g. cable breaks) via status relay.
  • Operational status and relay status indicated by front panel LEDs.
  • Galvanic 4-way isolation between input, output and supply.
 

Classifications

ETIM 8.0
EC002654 
ETIM 9.0
EC002654 
ETIM 10.0
EC002654 
ECLASS 14.0
27-21-01-22 
ECLASS 15.0
27-21-01-22 

Tender specification sheets

Ausschreibungstext lang

Universal limit-value monitoring component with relay output and
external supply
Universal limit-value monitoring component in 22.5 mm width with external voltage
and sensor supply, for monitoring and isolating DC currents +/- 25mA...5 A,
DC voltages +/-600 mV... 300 V, 2-/3-/-4-wire RTD sensors , resistors, potentiometers
and thermocouple signals according to IEC584.
Two relay contacts (CO) are available on the output side.
This component is programmed using FDT/DTM software.

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 119/ 22.5/ 113.6 mm
Screw connection / Nominal cross-section 2.5 mm2
Protection degree: IP 20  

Input                         +/-25 mA...5 A DC                                      
                                      +/- 600 mV...300 V DC
                                      PT100, PT1000, Ni100, Ni1000
                                      Resistance 0...12 kOhm
                                      Potentiometer 0...500 kOhm
                                      Thermocouple types B, E, J, K, L, LR, N, R, S, T, U, W3, W5
Sensor supply 24 V DC  
Output                                             2 x 1 CO (hard gold-plated) 
                                      240 V AC/ 24 V DC @ 6 A
Repeat accuracy        < 0,05 % v. E.  
Step response time
10...90 %                      < 200 ms
Auxiliary power                                     90...264 V AC / 120...370 V DC
Power loss approx. 3 W @ 240 V AC
Ambient
temperature range -20 °C...+70 °C



Isolation                                 EN 50178 secure 3-way isolation up to 3 kV AC/DC of all circuits against each other
Test voltage                               3 kV input against output against auxiliary power
Rated
voltage                                         300 V AC/DC at overvoltage category II and pollution degree 2

Approvals cULus




Type                                                             ACT20P-UI-2RCO-AC-S


 
Short specification
Universal limit-value monitoring component with relay output and
external supply
Universal limit-value monitoring component in 22.5 mm width with external voltage
and sensor supply for monitoring and isolating DC currents +/- 25mA...5 A,
DC- voltages +/-600 mV... 300 V, 2-/3-/-4-wire RTD sensors, resistors, potentiometers
and thermocouple signals, in compliance with IEC584.
Two relay contacts (CO) are available on the output side.
This component is programmed using FDT/DTM software.