TS 35X15/LL 2M/ST/SZ
Product image
Similar to illustration
TS 35X15/LL 2M/ST/SZ
Product image
Similar to illustration
TS 35X15/LL 2M/ST/SZ

TS 35X15/LL 2M/ST/SZ

Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 15 mm

Ürün No. 7907490000
Konfigüratörde aç
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 20 aksesuarıdır 19 İlgili ürünler 19
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Mounting rail Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 15 mm 
Order No.
7907490000 
Type
TS 35X15/LL 2M/ST/SZ 
GTIN (EAN)
4032248296262 
Qty.
20 

Dimensions and weights

Depth
15 mm
Depth (inches)
0,591 inch
Height
35 mm
Height (inches)
1,378 inch
Width
2.000 mm
Width (inches)
78,74 inch
Net weight
611,111 g

Temperatures

Ambient temperature
-5 °C…40 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Mounting rail

Bestückungsloch-Durchmesser (D)
5,2 mm
Distanza intaglio
11 mm
Drill-hole diameter
5,2 mm
Hålad montageskena
Yes 
IEC 60947-7-2에 따른 초당 단기 전류 내성
6 kA
Installation advice
Direct mounting 
Longitud de la guía de montaje
  • min.:
    0 mm
  • nominal:
    2.000 mm
  • max.:
    2.000 mm
Material básico
Steel 
Normen
In accordance with DIN EN 60715 
Rés hossz
25 mm
Short circuit strength corresponds to E-Cu wire
50 mm²
Slit gap
  • min.:
    11 mm
  • nominal:
    11 mm
  • max.:
    11 mm
Slit length
  • min.:
    25 mm
  • nominal:
    25 mm
  • max.:
    25 mm
Slit width
5,2 mm
Slit width
  • min.:
    5,2 mm
  • nominal:
    5,2 mm
  • max.:
    5,2 mm
Slotted drill holes
Yes 
Spacing of holes, centre-to-centre
36 mm
Surface finish
galvanic zinc plated and passivated 
Thickness
1,5 mm

Important note

Product information
Din rails with Sendzimier treatment have limited corrosion resistance on the outer and cut edges 

Classifications

ETIM 8.0
EC001285 
ETIM 9.0
EC001285 
ETIM 10.0
EC001285 
ECLASS 14.0
27-40-06-02 
ECLASS 15.0
27-40-06-02